Sync Center And Network Drives
Jun 9, 2010
I have been having a strange problem where Sync Center seems to be storing network drives as offline folders.
Even though I am connected to the network all the time and the network drives never go offline they still become unavailable. The network drive appear in the sync partnerships but I have not set these up and have been unable to remove them even when turning offline files off and back on again.
The only Sync which should be there is the folder for eel1651 the rest are network drives which it should not be trying to Sync. It is causing files to become unavailable even when I am currently working on them, so I can't save them. [URL]
As you can see here some of the files have become unavailable compared with above. [URL]
I have disabled all the firewalls and AV on computer and the problems is still happening.
View 5 Replies
ADVERTISEMENT
Dec 13, 2009
I have a Dell Axim X5, using Windows Mobile 2003. I have Windows 7 Ultimate x64. Before that, I was using Vista Ultimate x64, and had no problem connecting my Axim to my computer.
Now, I am trying to make my Axim work with Windows 7. After much hassle, I successfully installed the drivers. The Axim now shows up in: My Computer, Devices and Printer, and the Device Manager, all without any problems, errors, or yellow exclamation points. All says the device is "working properly."
However, when I open Sync Center, it does not see any device. Also, when I click on Windows Mobile Device Center, the application does not launch. The only thing that comes up is the Connection Settings screen, shown here:
Neither Sync Center nor WMDC seem to connect. Although wmdcBase.exe is running according to the Task Manager.
I have tried: uninstalling and reinstalling WMDC, updating via Windows Update, trying a new USB port, uninstalling and reinstalling the device drivers for the Dell Axim.
View 1 Replies
View Related
Jul 9, 2012
I was just wondering; if i get a laptop that uses the same network as my pc , would they be in sync.
For example lets say at work i created files, edited some , created new images ext. when i go to home the new stuff on the laptop will be on pc automatically?
View 2 Replies
View Related
Aug 17, 2009
Im after trying to sync a folder from my laptop to a network share on a windows 2003 file server. Not exactly sure how to go about doing it. I would like files to sync both ways so any changes i make to the folder on my laptop get applied to the share on my file server and any changes to the share on the file server are applied to the file on my laptop.
I had a look at sync centre which i believe is 7's version of offline files. I made a test share on my file server and set it to "Always Available Offline"
Now where do i go from here? Is it just a case of setting the foder on my laptop to point towards the network share?
View 9 Replies
View Related
Jul 2, 2012
I'm trying to set up two way sync between some files on my laptop and a network drive so that changes made to either the copy on the network or on my laptop get propagated to each other. I've read the instructions for setting up an "offline file" sync, which is a one way sync. The instructions usually mention that it's possible to set up a two-way sync, but they never actually describe how to do it.
View 3 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 23, 2009
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?
View 3 Replies
View Related
Jan 15, 2013
i'm running a windows 7 home premium 64 bit, and for some movies, the video will start in-sync for about 40 minutes, then slowly get farther and farther out of sync, making watching the video un-watchable after another 10 minutes. but it does not do this with all video types. it also does not do this with netflix, Internet, or anything else online.
i'm running a geforce gtx 660m, all drivers are up to date. the files that work are: mp4, files that don't work are: mkv, avi
those are the only files i have tried. it's done this since i got this computer a couple months ago
View 1 Replies
View Related
Nov 17, 2010
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
View 1 Replies
View Related
Nov 9, 2009
My network icon started displaying a red x about a week ago. now here's the kicker both my Wired and Wireless still work and if I hover the mouse above the icon it tells me I'm conected to my network. Now if I enter the Network and Sharing Center it tells me my access type is internet and my homegroup is Joined and that I have connection to the internet and that I'm connected by Lan but only through the full map does it tell me Lan Connection. Under Connections there is nothing listed.
Also under Change Adapter settings the only item that is currently there is my Bluetooth network. Please help more annoying than anything. And yes the internet works I'm on it right now.
View 2 Replies
View Related
Dec 1, 2008
What is the Networking and Sharing Center?
Simply put, the Network and Sharing Center is the control panel from where all networking settings and tasks can be launched in Windows 7.
View 0 Replies
View Related
May 14, 2009
I have 2 computers with windos 7 RC...
On my main computer I have added my folders of music and movies to the libaray ....
In the HTCP remote computer I set the home group etc ... I open Media Center .. I can scroll to shared and see my main computer but non of the files appear.
I have gone to the main computer and checked share this folder etc ... Still cant view the files.
What am I doing wrong ?
View 1 Replies
View Related
Dec 6, 2009
In Control Panel, when I click Network & Sharing Center, it freezes and does not recover. I am logged in as Administrator. I have no Internet connection; the taskbar icon for Wireless is greyed out.
View 3 Replies
View Related
Sep 26, 2012
ecently I have been experiencing this one issue over and over again, my internet would stop working in the middle of me using it. I would try to click on the wireless icon in the notifications bar and nothing would happen so I would then try and go to the Network and Sharing Center through the control panel and when I click on Network and Sharing Center the explorer that I am in freezes.I have looked on here to see if this is a common occurrence but I haven't been able to find anything similar to my issue.
View 2 Replies
View Related
Dec 13, 2011
Everything works fine but every time I restart windows it takes a good 3-5 minutes for the 'Network and Sharing Center' icon to "load". Basically it has that circular loading icon hovering over it like it's loading something, and sometimes it has a red cross over it. During this time Firefox won't load and MSE disables real time protection until the network center says I'm connected.
View 1 Replies
View Related
Oct 15, 2009
I have recently (After yesterday's Windows Update) gotten a weird problem.
As I log in normally to my computer, the Network Sharing Center doesn't respond, nor does the icon down in the taskbar. I have tried the solutions you can find by googling to fix this - none helped.
That is not everything, every application that wants to use Internet connection freezes as they try to do so.
I got it fixed temporarily by using the System Restore to restore the system to the point before the Windows Updates were applied, but that is not an option anymore, because the restore point is no longer there.
Windows does not let me uninstall updates in Safe Mode, and as Windows Update accesses Internet to do so - it too freezes during a normal login.
Any suggestions?
View 7 Replies
View Related
Aug 25, 2010
How to Create a Network and Sharing Center Shortcut in Windows 7 ?
View 0 Replies
View Related
Oct 17, 2012
The network is connected and working fine (well not fine, but will get there).Bat the Network and Sharing Center is not recognizing that it is connected or that there even is a NIC installed.I can surf the net and connect to other computers, but, any program that depends on the information from that specific component Seams to not be able to connect (IE Logmein) and also I'm unable to configure my network as a "work network" so I had to remove the windows firewall so I will be able to connect 2 my SQL server and network shares from other computers on the company's network.Solutions I have already tried:1.Reinstall NIC driver from gigabyte website.2.Install Realtek Ethernet Diagnostic Utility3.Installed FixItCenter from Microsoft.4.Netsh winsock reset (As admin)[CODE]
View 3 Replies
View Related
Dec 19, 2009
I have a Dell XPS 420 with a 64 bit windows 7 pro installed. My computer has a Broadcom 802.11g wireless adapter. I can see the adapter in network adapters (It has a red cross underneath it). But I dont see this adapter in the Network and Sharing center. Can someone help me with this problem.
View 2 Replies
View Related
Apr 9, 2011
I have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
View 7 Replies
View Related
Dec 22, 2012
I have two networked computers using Windows 7 Ultimate.Both are part of WORKGROUP.Computer 1 has 3 internal drives, one of which is shared and can be accessed by Computer 2; and 1 external drive, also shared and also accessible by Computer 2.Computer 2 has three internal drives, two of which are shared. Permisions are set for Everyone to have full access to both drives.Yet computer 1 can only connect to one of the shared drives.When I try to Map the errant drive from Computer 1, I constantly get the stupid message that I don't have permission.
View 5 Replies
View Related
Oct 30, 2011
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
View 2 Replies
View Related
Oct 19, 2011
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
View 7 Replies
View Related
Jan 1, 2010
I have two desktop PCs running Windows 7 Ultimate, a HP laptop running Windows XP SP3 and a Network Storage Device (Dlink DNS 343 with 3 Raid Volumes) networked via a D Link DIR-635 wireless Router. Both PCs and the DNS-343 are hard-wired to the router: the Laptop connects wirelessly.
Since installing Windows 7 on the PCs, I am unable to map the network drives on the DNS-343 even though all network components are visible and functioing in Windows Network Map, Pure Networks Map and Norton Internet Securities 2010 Network Map(with Full Trust).
This was not previously a problem with one PC running XP SP3 and the other Vista SP1. The DNS-343 does NOT appear as a network device in Windows 7 Windows Explorer: nor does the Laptop, on either PC. The laptop running XP is able to Map network drives as before and access shared folders on both PCs.
To date I have reset the factory defaults on the router and DNS-343;disabled all firewalls and minimised security controls (eg: MAC filtering) as far as I am able. I can ping each device successfully. The problem is I cannot "see" the DNS-343 in Windows 7 Windows Explorer to map the drives.
View 6 Replies
View Related
Jun 21, 2010
I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".
On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.
What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.
I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.
View 4 Replies
View Related
Dec 17, 2012
My problem is with all the users files on the file server don't all show-up. Some stay as 'My Documents'.
I believe there is something to delete within the folders to make it show the names properly, but I can't remember.
View 1 Replies
View Related
Jun 13, 2011
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies
View Related
Mar 15, 2011
I have speed issues when working with files on the LAN network. They open and save much much slower than XP. On the other hand the ADSL internet connection is fine and running at full speed. What is the problem? The computer is brand new and with fresh install of Windows 7 x64.My other problem is with mapped network drives. On the second computer, which is running fresh install of Windows 7 too, we have mapped network drives which are accessable on the whole network. The problem is that every time we start that PC with the mapped network drives Windows says "Could not reconnect all network drives" and all computers on the network show them with red "x" on the icons. I want them to automatically open at startup.
View 2 Replies
View Related
Sep 21, 2011
I have installed a wireless Epson Workforce 610 printer (it is fast!) but if it is not turned on when I boot I get a notification message "Could not reconnect all network drives".Is there a setting which will prevent this from displaying? One other computer which has the same drivers does not show this message, so it is puzzling.I disabled all the Epson drivers in Startup but that did not help.
View 3 Replies
View Related
Sep 26, 2011
Windows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.
View 8 Replies
View Related
Sep 30, 2011
A while back I shared all my main pc drives on my newtork by right clicking on the drive in my computer then clicking the share tab. I then later un-shared them by unclicking the tab but all the computers could see the drives that had been previously shared from my main computer. They could even access them even though they had been unshared. I then later reinstalled windows7 on my main computer but the drives are still visible and accessable from computers on my network.
View 1 Replies
View Related
