Network Sharing Center Doesn't Respond
Oct 15, 2009
I have recently (After yesterday's Windows Update) gotten a weird problem.
As I log in normally to my computer, the Network Sharing Center doesn't respond, nor does the icon down in the taskbar. I have tried the solutions you can find by googling to fix this - none helped.
That is not everything, every application that wants to use Internet connection freezes as they try to do so.
I got it fixed temporarily by using the System Restore to restore the system to the point before the Windows Updates were applied, but that is not an option anymore, because the restore point is no longer there.
Windows does not let me uninstall updates in Safe Mode, and as Windows Update accesses Internet to do so - it too freezes during a normal login.
Any suggestions?
View 7 Replies
ADVERTISEMENT
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 23, 2009
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?
View 3 Replies
View Related
Nov 9, 2009
My network icon started displaying a red x about a week ago. now here's the kicker both my Wired and Wireless still work and if I hover the mouse above the icon it tells me I'm conected to my network. Now if I enter the Network and Sharing Center it tells me my access type is internet and my homegroup is Joined and that I have connection to the internet and that I'm connected by Lan but only through the full map does it tell me Lan Connection. Under Connections there is nothing listed.
Also under Change Adapter settings the only item that is currently there is my Bluetooth network. Please help more annoying than anything. And yes the internet works I'm on it right now.
View 2 Replies
View Related
Dec 1, 2008
What is the Networking and Sharing Center?
Simply put, the Network and Sharing Center is the control panel from where all networking settings and tasks can be launched in Windows 7.
View 0 Replies
View Related
Dec 6, 2009
In Control Panel, when I click Network & Sharing Center, it freezes and does not recover. I am logged in as Administrator. I have no Internet connection; the taskbar icon for Wireless is greyed out.
View 3 Replies
View Related
Nov 17, 2010
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
View 1 Replies
View Related
Sep 26, 2012
ecently I have been experiencing this one issue over and over again, my internet would stop working in the middle of me using it. I would try to click on the wireless icon in the notifications bar and nothing would happen so I would then try and go to the Network and Sharing Center through the control panel and when I click on Network and Sharing Center the explorer that I am in freezes.I have looked on here to see if this is a common occurrence but I haven't been able to find anything similar to my issue.
View 2 Replies
View Related
Dec 13, 2011
Everything works fine but every time I restart windows it takes a good 3-5 minutes for the 'Network and Sharing Center' icon to "load". Basically it has that circular loading icon hovering over it like it's loading something, and sometimes it has a red cross over it. During this time Firefox won't load and MSE disables real time protection until the network center says I'm connected.
View 1 Replies
View Related
Aug 25, 2010
How to Create a Network and Sharing Center Shortcut in Windows 7 ?
View 0 Replies
View Related
Oct 17, 2012
The network is connected and working fine (well not fine, but will get there).Bat the Network and Sharing Center is not recognizing that it is connected or that there even is a NIC installed.I can surf the net and connect to other computers, but, any program that depends on the information from that specific component Seams to not be able to connect (IE Logmein) and also I'm unable to configure my network as a "work network" so I had to remove the windows firewall so I will be able to connect 2 my SQL server and network shares from other computers on the company's network.Solutions I have already tried:1.Reinstall NIC driver from gigabyte website.2.Install Realtek Ethernet Diagnostic Utility3.Installed FixItCenter from Microsoft.4.Netsh winsock reset (As admin)[CODE]
View 3 Replies
View Related
Dec 19, 2009
I have a Dell XPS 420 with a 64 bit windows 7 pro installed. My computer has a Broadcom 802.11g wireless adapter. I can see the adapter in network adapters (It has a red cross underneath it). But I dont see this adapter in the Network and Sharing center. Can someone help me with this problem.
View 2 Replies
View Related
Oct 30, 2011
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
View 2 Replies
View Related
Jan 30, 2012
Windows 7 N&S center is really slow. I have no idea what's causing it.Symptoms not present when I connect to my wireless router.But when I tether (get a connection from a USB device) the N&S Center stops responding for about 10 minutes.At some point, it will come up with the "Public Network?" box.How can I debug this?Even after the network is initialized, the N&S center is still very slow.I assume it's doing some automatic something or other that keeps pinging this, that or the otherThe USB device would serve an internet connection that has a reasonably high latency.Lots of network tools seem to slow down, especially while the connection is configuring itself. This is probably because all of the services involved are interlinked somewhere, and are waiting on the same mutex to be released or something.
View 3 Replies
View Related
Aug 29, 2011
problem with network sharing i have windows 7 64bit starter version and i set up a ad hoc but the " turn on network sharing " doesn't shows! and another problem when i enter name and password and next it say's that network cannot set up.i wanna share my network in the pc to my iphone with wifi and i have wifi cart in my hp probook 4520s
View 9 Replies
View Related
Jan 2, 2010
I have a Windows 7 laptop connected via a WRT54G2 wireless router to an XP SP3 desktop. Both the laptop and desktop can see shared resources and both can connected to the internet.
In the Laptop's Network and Sharing Center, however, things are not correct. The Laptop has two connections to the router, lan and wireless. The lan's connection appears OK, but I cannot generate a map. I get "Windows cannot discover any computer or device." The wireless network is public.
I don't know why and I don't know how to change it. Also, when I try to create a new network connection, the laptop sees only a WRT160N router (which I don't have; perhaps I did a while ago, when the laptop ran Vista). No place to add a new one.
I have Cisco's Network Magic and it can correct see everything, including the right router.
View 9 Replies
View Related
Aug 29, 2012
My computer doesn't respond after a few minutes of logged on. I can't find a fix for it and don't know what's causing it. i don't have much startup programs and whenever it freezes, the cpu useage is low so there isn't a program that's using all of my cpu.
View 6 Replies
View Related
Feb 4, 2012
i have window 7 ,when i use external hard disk to gat the data ,my system shows the disk in c drive ,but when i try to open,my computer doesn't respond ..its says computer not responding
View 2 Replies
View Related
Nov 21, 2010
I have recently upgraded to Win 7 Pro 64-bit with Office 2003 SP3 all updates done.I use Firefox 3.6.12 as my main browser. I have noticed on websites that have an contact via email that nothing happens when double clicking it, other than seeing mailto: appearing on FF status bar.At other times I have seen it produce an error window in Outlook saying script isn't running/ Outlook client isn't installed properly.On second bootable drive, with Win XP Pro and Firefox with same Outlook 2003, it works flawlessly. Even if Outlook isn't open, it will start it up straight into new message with correct email address in the To field.
View 3 Replies
View Related
Aug 22, 2012
I have the Microsoft wireless desktop 6000.
When I leave my computer on for a bit and walk away, the screen will turn off by itself (this is not standby!!!) and sometimes, the keyboard or mouse seems to have lost its connection to the computer, and will not respond to anything, I have to hit the reset button.
View 7 Replies
View Related
Oct 6, 2012
I have this windows 7 for year and not have problems until now. Now the windows doesn't respond when it works and only the mouse fan move, but with cursor in position of loading. ctrl+alt+delete doesn't work and only shut down the computer can work. I tried use "safe mode" and the sound driver didn't work. I succeeded to do recovery two times but the problem repeat on itself. I tried to scan for virus but there wasn't. How can I handle it?
View 4 Replies
View Related
Feb 4, 2010
ive added the folders in windows media center id like to share but when i go on my ps3 it says its not registered or something?could we use the media center and ps3 for sharing?
View 5 Replies
View Related
Dec 25, 2012
My Windows 7 Dell Studio 1550 laptop computers disc drive has been acting up for a little while now, like having to insert a DVD twice before it starts to autoplay with Windows Media Player (WMP). Just little things like that. Now when I try to play my audiobook I got today and it isn't recognized by WMP. When the look in Windows Explorer the files it contains are garbage- default style files of size 1kb with default track names like: Track01, Track02....Thinking that it could be that the CD might be readable on normal car CD players and similar, I double check with an old CD that I burnt myself a couple weeks ago. It doesn't recognize that either and it Win Explorer displays the same garbage.WM Player does literally nothing when it is told to play to it, and VLC tells me that:"Your input can't be opened: In desperation I try the original CD in my gaming tower. It plays but now it refuses to eject the disk. It has a LG MODISC CD/DVD-RW with Lightscribe in it.
View 1 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Feb 11, 2012
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies
View Related
Mar 9, 2011
Within the last couple days, Media Center/Recorded TV has started displaying a message "WMC could not find any shared libraries on your network or there is no content in those libraries."The directory it uses to record is "C:UsersPublicRecorded TV" and I can see prior recordings and new recordings in this directory. If I go into "Tasks" and select this directory as a library it shows as already selected and tells me no changes will be made to my libraries list on selecting "finish".I can click on one of the recorded program files in file manager and it will launch WMC and play just fine - the recorded programs just don't show up in the WMC/Recorded TV where they should.
View 4 Replies
View Related
Oct 9, 2012
[I reinstalled Windows 7 using the Upgrade option (not clean install) but before I could do the reinstall it said I had to uninstall Ati Technologies which I could then reinstall after the upgraded Windows]I ran install for the Catalyst Softward Suite for drivers which had the CCC listed, but there is no CCC option in the install list when I run to install. It just doesn't appear! I've uninstalled ATI Catalyst Install Manager, ran Driver Sweeper in safe mode and then reinstalled but still the CCC does not appear in the list. I've also checked the Windows/Assesmbly key problem too. It's the same problem as this post: Catalyst Control Center missing/Wont install?I have a Radeon 4000 series card.
View 4 Replies
View Related
Sep 13, 2011
I am running Windows 7 64Bit Ultimate Edition and my .mkv files doesn't show up. I installed Shark007 codecs and 64bit stuff but it doesn't show up.
View 2 Replies
View Related
Sep 25, 2012
Our office has 4 computers set up with Windows 7. One computer has a bunch of shared files and acts like a file server. The other two computer can connect to the \fileserver okay. No problems at all. I can not. I have tried IP address, name, going through work arounds, turning off firewalls, anti-virus, etc. But when I go to it I get the "You do not have permission to access \fileserver. Contact your network administrator to request access. Nobody else has an account set up on any machine, so i fear adding mine to the other three.
View 2 Replies
View Related
May 6, 2012
I am using the Homegroup feature of Windows 7 right now. I have four computers, configured with one account each, that are members of this HomegroupPC1, PC2, PC3, PC4PC1 configured the Homegroup and has the only shared library that is visible on the Homegroup. PC2, PC3, and PC4 all save documents to the shared Homegroup library on PC1.PC1 is basically acting as a file server.I want to set it up so that only certain accounts on each of the other three (PC2, PC3, PC4) computers can see certain folders in the shared Homegroup library.For instance, I have three folders in the shared Homegroup library located on PC1.Folder2, Folder3, Folder4How do I individually share those folders with only certain computers?
I have tried sharing with only "specific people" but it tells "windows was unable to find (name)". I have tried typing in the name of the computer to share with as well as account names.I have run the Homegroup troubleshooter on all computers and I still cannot share specific folders with specific computers.What would be the best way to share how I desire? Is there a better way than with the Homegroup or am I just doing something wrong?
View 1 Replies
View Related
Feb 17, 2013
I have 3 computer(mine,mum and bro) all running on window 7 and connected to the same workgroup.i would like to make all d drive public.. however photo folder i wan access to mum and video folder access to bro.
View 1 Replies
View Related
