Connectivity With Windows 7 64bit And Network Drives?
Feb 23, 2011
Several users are getting a delayed response when trying to open a network drive. There are several instances where it would take 15-30 seconds to open a network drive.Also users are having issues saving a document, receiving the error message "access denied you do not have rights to do this" seems like the network connection is breaking at some point to making the computer think there is another copy open.What I've done so far:
latest windows updates
latest word processing and client updates
View 1 Replies
ADVERTISEMENT
Oct 13, 2012
The wireless adapter does NOT appear in ipconfig! but Ethernet does.Ethernet works properly.Unable to rollback/system restore as all deleted (don't know how or why).There is no wireless connectivity and with a USB wireless adapter the same problem. Hardware installs and says working OK, but unable to connect to wireless also.
Ipconfig is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Jabberwocky
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 1 Replies
View Related
Jan 14, 2012
m using toshiba satellite L640 when i try 2 connect 2 internet it keeps on acquiring network address and shows limited connectivity in windows 7 home premium..
View 1 Replies
View Related
May 4, 2012
I am having a problem connecting to the internet in a public library where all other laptop users are connecting successfully. The curious part of the connectivity issue (to me, anyway) is that according to my computer I AM connected to the network. I have provided some screen caps of the issue (links below), and tried to run the Intel ProSet Wireless Tools diagnostic to troubleshoot the problem of connectivity. The test run by my computer indicated that my Ping Test failed Response: Default Gateway, DHCP server No Response.
View 3 Replies
View Related
Jun 11, 2009
This has been an issue since I upgraded to 7201. It isn't constant, and seems to be worse when I'm downloading large files, especially multiple files from one source (like an album in iTunes). It is fixed by release/renew (or just letting Diagnostics do that).
If I'm not using a lot of data (regular web browsing, working on a database online, etc), it seems perfectly fine. It is holding so far downloading one track at a time on iTunes, but if I do 2, it drops the connection.
I'm using the Home network config, router is working normally, and I can't recall this happening before 7201. I've reset the router, upgraded firmware, and it only happens on this PC. I've set WINS, tried all settings for TCP/IP 4 and 6, and using the other ethernet port on my motherboard.
More of an annoyance, really, but I can't figure it out and it is bugging the hell out of me.
EDIT: I can still get 1 mb/s on a single download, but trying 2, I get 600/400 for about 10-15 seconds until it disconnects.
View 5 Replies
View Related
Nov 25, 2009
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
View 2 Replies
View Related
Nov 2, 2009
just upgraded my vista 64-bit install to win7 home prem 64-bit.
everything has been working great except for an internet/network issue. at random times, all of a sudden the icon in the tray gets that yellow exclamation point over it and says there's a network issue and no internet available. it's like that until i disable and re-enable the network adapter. there are other systems on the wired router and they're still working fine (vista and xp machines).
the strange thing is it *seems* to only do it when i start doing more than one thing at the same time. i.e. trying to watch Internet while playing an online game. or, downloading a pdf while streaming music. all of a sudden, all internet goes down (other computers still working fine though). once i reset the adapter, all is well.
any ideas here?
View 2 Replies
View Related
Apr 13, 2009
Yesterday I updated to v. 2.2 Of Sun Virtualbox and have lost my connection to the Internet on Windows 7. The 'VirtualBox Host - Only Network Status' reports "limited or no connectivity". This is because "the Network did not assign a Network Address to the Computer". I have not been able to solve this problem, the icon in the sys. tray has a yellow marker against it.
I have normal connectivity on Windows XP.
I cannot wind back using System Restore as there are no restore points. I do have a drive image of my C; drive dated just prior to the update, would this work?. Is there an easier way?.
View 4 Replies
View Related
Nov 5, 2009
I work at a company in the UK which is attempting to start rolling out Windows 7 to all computers (early adopters and all that, it's just a lot easier than the current mishmash of OSes we have!). One of the 4 users migrated so far is having an odd issue with her wired network (her network controller is a "Broadcom Netlink Gigabit Ethernet"). She's the only person not from the IT dept or the MD of the company to be moved across, so we set her up as a non-administrator to avoid problematic software etc etc.
Suddenly, 3 days ago, whenever she switched on her computer, the connection would claim "Limited or No Connectivity" (even though she appeared to be connected to the Domain), and there was no Internet access. Having played around with numerous things (driver updates, both from Broadcom and HP - the laptop manufacturer, being the main one), I found the only way to get it working again was to disable and re-enable the network controller. The problem with this is that it required a UAC authorization (even though I'd set UAC to never notify), and that requires a domain administrator password (which is a pain in the wotsit).
Anyway, I figured, reluctantly, that if I set her account up as a local administrator, that at least it shouldn't require a password to reset the device. Rebooted the PC, and suddenly the wired network started working from boot without the need to reset the controller.
My question is - has anyone else had any issues with non-administrators being forced to reset their network controllers to get internet connectivity, and is there a known fix?
View 2 Replies
View Related
May 6, 2009
I installed Windows 7 RC 64bit on my Ausus Striker II Formula Motherboard (Nforce 780sli) and everything was working sweet.
I attempted to do a System Transfer from my old Windows Vista 64bit (where you transfer your documents etc.), this appeared to go well however now my network connection will not work. DHCP or Static IP settings dont work. I am unable to change the 'unidentified' network's location from public.
Any ideas from anyone?
I am close to reinstalling.
View 3 Replies
View Related
Jun 2, 2011
We have 2 wireless laptops & 1 hard wired tower (all onWindows 7) in a home network. (All hardware are new this year) The laptops have intermittent internet connectivity yet do not lose the network connections. I have upgraded both the Motorola modem and Linksys router to Windows 7 but it did not resolve the issue.
View 5 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Jul 5, 2011
I successfully installed Windows 7 64bit in AHCI mode on a PC with 3 new 3TB Western Digital WD30EZRX Caviar Green hard drives.Then I installed "Intel Matrix Storage Manager Driver [v8.9.0.1023]" & as soon as Windows restarted after installing it, Windows would not boot, & will now only boot in IDE mode.In IDE mode I have to do a system restore to the point before installation of "Intel Matrix Storage Manager Driver" to be able to boot again in AHCI mode.
View 1 Replies
View Related
Feb 17, 2012
I had Windows 7 32-bit running on a Dell PC. About one week ago, I noticed Internet connectivity was gone and that there was "limited connectivity" as I was now connected to an "unidentified network". The other systems on the network are still connected and working perfect; the problem is isolated to this one system. The network uses a static IP scheme. "IPCONFIG /ALL" shows that the IP is assigned, is included on the correct subnet and has the correct gateway and DNS information. I've tried a host of solutions suggested on forums; from "route delete 0.0.0.0" to disabling my firewall to configuring for a dynamic IP. Nothing has worked. Reluctantly, I resorted to a fresh install as I began to worry that I may have picked something up. I completely wiped the hard drive and did a fresh Windows 7 32-bit installation all only to have the same problem. I assume that the NIC is functioning as it accepts all IP settings.
View 1 Replies
View Related
Jun 21, 2010
I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".
On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.
What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.
I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.
View 4 Replies
View Related
Oct 27, 2011
i have about 10 windows 7 pc's on my network and we have network drives mapped to there pc's the mapped drives keep showing up with a red X and i have to remote to there pc and go thru the netowrk and get to the exact location and click on work online.
View 2 Replies
View Related
Mar 22, 2011
When I boot up my Windows 7 Professional x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard wired into the network (not wireless) and I cannot find a way around it.
All the solutions I have found state its either due to wireless network authentication occuring late in the boot process (but im hard wired) or that you need to upgrade to a Pro edition of windows (which I cam using).
It is not disasterous if I am being honest its just mildly irritating
View 1 Replies
View Related
Feb 26, 2012
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
View 5 Replies
View Related
Dec 12, 2010
when i try installing windows 7 on my netbook over a network it wont detect my hard drives
View 9 Replies
View Related
Jan 15, 2013
This is my situation: I have a virtual machine running, and a network drive which is mapped to that machine.The problem here is that when I am trying to login on windows, windows is first trying to connect to that mapped network drive - which it cannot because my virtual machine has to start up first. This results in a rather long login-time.So my question is, is there some (registry) setting which allows me set this connection timeout to 0? Or that it won't automatically reconnect the drive at login? Of course the setting 'Do not automatically reconnect at login' is too obvious and does not work, because it also removes the whole mapped network drive at system restart - in my situation the drive should be there, just not connected
View 3 Replies
View Related
Nov 22, 2010
I have an HP Quad Core computer that came with two hard drives.I installed Windows 7 32 bit a year ago. The disk also came with a 64 bit version but the upgrade required a clean install.If I decide to install the 64 bit version, do I lose everything on both drives?
View 9 Replies
View Related
Nov 21, 2009
i am looking to build a new PC and will include a Corsair SSD.. need some information re TRIM support..Win7 I understand supports TRIM but do you need to install a program or is this already in Win7?
View 9 Replies
View Related
Oct 6, 2011
I have two win 7 computers on a home network and I would like both machines to have full access to the hard drives on either machine, not just share folders. How is this done?
View 2 Replies
View Related
Apr 9, 2011
I have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
View 7 Replies
View Related
Dec 22, 2012
I have two networked computers using Windows 7 Ultimate.Both are part of WORKGROUP.Computer 1 has 3 internal drives, one of which is shared and can be accessed by Computer 2; and 1 external drive, also shared and also accessible by Computer 2.Computer 2 has three internal drives, two of which are shared. Permisions are set for Everyone to have full access to both drives.Yet computer 1 can only connect to one of the shared drives.When I try to Map the errant drive from Computer 1, I constantly get the stupid message that I don't have permission.
View 5 Replies
View Related
Oct 19, 2011
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
View 7 Replies
View Related
Jan 1, 2010
I have two desktop PCs running Windows 7 Ultimate, a HP laptop running Windows XP SP3 and a Network Storage Device (Dlink DNS 343 with 3 Raid Volumes) networked via a D Link DIR-635 wireless Router. Both PCs and the DNS-343 are hard-wired to the router: the Laptop connects wirelessly.
Since installing Windows 7 on the PCs, I am unable to map the network drives on the DNS-343 even though all network components are visible and functioing in Windows Network Map, Pure Networks Map and Norton Internet Securities 2010 Network Map(with Full Trust).
This was not previously a problem with one PC running XP SP3 and the other Vista SP1. The DNS-343 does NOT appear as a network device in Windows 7 Windows Explorer: nor does the Laptop, on either PC. The laptop running XP is able to Map network drives as before and access shared folders on both PCs.
To date I have reset the factory defaults on the router and DNS-343;disabled all firewalls and minimised security controls (eg: MAC filtering) as far as I am able. I can ping each device successfully. The problem is I cannot "see" the DNS-343 in Windows 7 Windows Explorer to map the drives.
View 6 Replies
View Related
Dec 17, 2012
My problem is with all the users files on the file server don't all show-up. Some stay as 'My Documents'.
I believe there is something to delete within the folders to make it show the names properly, but I can't remember.
View 1 Replies
View Related
Jun 13, 2011
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies
View Related
Mar 15, 2011
I have speed issues when working with files on the LAN network. They open and save much much slower than XP. On the other hand the ADSL internet connection is fine and running at full speed. What is the problem? The computer is brand new and with fresh install of Windows 7 x64.My other problem is with mapped network drives. On the second computer, which is running fresh install of Windows 7 too, we have mapped network drives which are accessable on the whole network. The problem is that every time we start that PC with the mapped network drives Windows says "Could not reconnect all network drives" and all computers on the network show them with red "x" on the icons. I want them to automatically open at startup.
View 2 Replies
View Related
Sep 21, 2011
I have installed a wireless Epson Workforce 610 printer (it is fast!) but if it is not turned on when I boot I get a notification message "Could not reconnect all network drives".Is there a setting which will prevent this from displaying? One other computer which has the same drivers does not show this message, so it is puzzling.I disabled all the Epson drivers in Startup but that did not help.
View 3 Replies
View Related
