I have an HP Quad Core computer that came with two hard drives.I installed Windows 7 32 bit a year ago. The disk also came with a 64 bit version but the upgrade required a clean install.If I decide to install the 64 bit version, do I lose everything on both drives?
View 9 RepliesI have Win 7 desktop with 2 hard drives. One small SSD I use for work only and it only contains few work-related programs. The second larger HDD has a cloned bootable copy of SSD (in case of failure of SSD I would be able to continue working) but also has other non-work related stuff (pictures, videos, games....).
I was wondering how to set up the system so that I get a choice of which drive to boot from every time I turn on the system. That way I could choose which drive to access depending on whether I need to work or play.
My hard drive is slowing down the preformace of my computer. The hard drive gets a 5.9 rating in windows 7 performance ratings. I would like to switch out to a newer hard drive possibly Western Digital Caviar Black 1TB WD1002FAEX. I do have an external backup drive
View 4 Replies View Relatedi am looking to build a new PC and will include a Corsair SSD.. need some information re TRIM support..Win7 I understand supports TRIM but do you need to install a program or is this already in Win7?
View 9 Replies View RelatedI successfully installed Windows 7 64bit in AHCI mode on a PC with 3 new 3TB Western Digital WD30EZRX Caviar Green hard drives.Then I installed "Intel Matrix Storage Manager Driver [v8.9.0.1023]" & as soon as Windows restarted after installing it, Windows would not boot, & will now only boot in IDE mode.In IDE mode I have to do a system restore to the point before installation of "Intel Matrix Storage Manager Driver" to be able to boot again in AHCI mode.
View 1 Replies View RelatedI'm having issues with transferring data between hard drives in my system. I have 3 500 GB drives in my system connected via esata. Just a few minutes ago I tried transferring 24.1 GB from one hard drive to another and it took forever I was getting under 10 MB per second. Once I got everything transferred I created a folder in the drive I moved everything to and then moved the same 24.1 GB plus another folder that was 10 GB and everything transferred into the folder instant, so fast I couldn't every look to see how long it was taking cause it was there the minutes I moved the folders to the new folder. Why did it take so long transferring that same data from one hard drive to another one in my system?? I should be getting a whole lot more than 10 MB per second.
View 4 Replies View RelatedI have two hard drives, one is SATA 500gb and the other is IDE 150gb. I had Windows 7 on the SATA and an old Ubuntu on the IDE hard drive. I hardly ever used Ubuntu and got tired of GRUB coming up every time I booted asking which OS I want so I decided to uninstall it. I wanted to go ahead and reformat the drive so I used an old Windows XP cd I have to reformat the 150g IDE drive. It wouldn't let me just reformat without installing XP so I went ahead and did that.So now whenever I turn on the PC it automatically boots into Windows XP. In XP I can see both drives, my 500gb with all my files and Windows 7 and the 150gb with just XP on it. In my BIOS the SATA 500gb is set as the main hdd, and is set as #1 in the boot priority (IDE hdd is not anywhere in boot priority). When I bring up the boot list and choose the SATA HDD it just brings up a BIOS flasher, no Windows 7.
View 4 Replies View RelatedI'm about to install windows 7 64bit, onto a new system, with 3 hard drives. One for OS and Data. Second one (SSD) will only be used for caching - fast boot. Third one for -printer-pagefile etc. System is ASUS P8Z77-V deluxe, which has UEFI. Do I need MBR partitions or GPT Partitions.
View 1 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View Relatedi have ubuntu and windows 7 on the same pc, but i need to repair install windows 7 but i need bios update but i dont have the battery my pc is dell d630, so i create with neroa boot cd wich contains the bios update executable, then i restart windows and it boots from caldera dr-dos in A:> but i can't switch from a: to z: where is the flash image for the bios ?
View 1 Replies View RelatedI have a 30GB SSD that is my default drive, with windows 7 on it. It's just too small and I need to switch to a larger one. I also have a 2TB HD with most of my games and other various programs on it. My question is, Can I just buy another SSD, install windows 7, and stick it in like nothing happened? Will I come across any errors because my 2TB is used to the old C: drive? OR, can I just do a full backup of the 30GB SSD and stick it on another drive and pretend nothing happened?
View 2 Replies View Relatedam trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies View RelatedDo I need to buy a retail copy to switch?
View 10 Replies View Relatedcant install my 32bit software unto windows 7 home premium 64bit
View 2 Replies View RelatedI want to upgrade the harddrive and just bought a seagate momentus 7200rpm to change my old hardrive. I know my ram cannot be upgraded cause it is the maximum 4gb that it is. I would like to be able to use though this 1 more gb, that now with 32bit windows cannot be used. I am thinking in bying windows 7 64bit but have no idea if my system will be compatible, like my processor, my motherboard, my ram, everything. Can you please tell me if it is possible to switch to 64 bit version or should i stick to 32bit because i might have things not working on my laptop? [code]
View 6 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedWe have two disks in raid 0. We want to get rid of them, as they are failing and install a single hard drive with Windows 7. We currently have Vista installed. There are no files I need to copy, just want to start with a fresh operating system. How do I go about this? Can I just remove the old hard drives and replace with the single hard drive and install Windows 7 on it, or is it more complicated than that?
View 8 Replies View RelatedMy system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
Several users are getting a delayed response when trying to open a network drive. There are several instances where it would take 15-30 seconds to open a network drive.Also users are having issues saving a document, receiving the error message "access denied you do not have rights to do this" seems like the network connection is breaking at some point to making the computer think there is another copy open.What I've done so far:
latest windows updates
latest word processing and client updates
i built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.
View 5 Replies View RelatedI've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.
View 5 Replies View RelatedI currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on
upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?
If I Format my Hard drives ,do I lose all my systems ,Like Windows???
View 4 Replies View RelatedWhenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
View 4 Replies View RelatedI have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
View 2 Replies View Related64installed on c, win 7 later installed an d. dual boot has been working perfectly until
something caused the drives to switch. now win 7 starts ok but looks for all it's files on c, which is locked.
vista starts up fine, and sees all it's files on c as it should.
my windows 7 repair disk, created at start of win 7, does not correct problem, nor does system restore.
After upgrading, I've found that I have 7 IDE hard drives ranging in size from 1 GB (!!!) to 200 GB. I'd like to get rid of them all. Is there a free reliable recylcing service out there. I've already wiped them clean (except for the 1 GB drive which won't spin up. It's from 1994).
View 7 Replies View RelatedJust added this to my computer Safely Remove Hardware Shortcut - Create
and when I try and eject using the right click on the desktop I get
Problem Ejecting XXXXXx USB Device
The 'XXXXXXXXX' device is not removable and cannot be ejected or unplugged
This is when I try any combination of clicking stop on the drive name and drive letter in the window.
I can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
This morning my pc started acting up for some unknown reason. After numberous attempts to fix it, I decided to restore from a restore point. It said it did restore but things got even worse.I then decided to restore an Maxium Reflect image I had made a couple weeks ago. When I made the image, the pc was working fine. The restoring of the image went normally.I have two strange things occurring.
1. I have two hard drives with 3 partitions on each drive. After about 10 minutes I can NOT see second hard drive in either windows explorer or Disk Managaer.
2. When the pc is first booted and a few minutes pass, I get what sounds like a radio station playing. It only lasts for about 20-30 seconds then goes off. It comes back randoms times. I have checked the processes that are running and nothing stands out that would cause this.I built this PC in 2009 and the combination of these identical hard drives (1 TB Sata) have always acted strange at times. Example the second hard drive would NOT always boot when windows booted. This was usually fixed by just rebooting.I have checked and all fans are working normally and inside the case is relatively clean.Is there any software that can be used to check hard drives???