Cannot Switch The Drives
Jun 18, 2012
i have ubuntu and windows 7 on the same pc, but i need to repair install windows 7 but i need bios update but i dont have the battery my pc is dell d630, so i create with neroa boot cd wich contains the bios update executable, then i restart windows and it boots from caldera dr-dos in A:> but i can't switch from a: to z: where is the flash image for the bios ?
View 1 Replies
ADVERTISEMENT
May 13, 2011
I have a 30GB SSD that is my default drive, with windows 7 on it. It's just too small and I need to switch to a larger one. I also have a 2TB HD with most of my games and other various programs on it. My question is, Can I just buy another SSD, install windows 7, and stick it in like nothing happened? Will I come across any errors because my 2TB is used to the old C: drive? OR, can I just do a full backup of the 30GB SSD and stick it on another drive and pretend nothing happened?
View 2 Replies
View Related
Sep 1, 2012
I have Win 7 desktop with 2 hard drives. One small SSD I use for work only and it only contains few work-related programs. The second larger HDD has a cloned bootable copy of SSD (in case of failure of SSD I would be able to continue working) but also has other non-work related stuff (pictures, videos, games....).
I was wondering how to set up the system so that I get a choice of which drive to boot from every time I turn on the system. That way I could choose which drive to access depending on whether I need to work or play.
View 5 Replies
View Related
Nov 22, 2010
I have an HP Quad Core computer that came with two hard drives.I installed Windows 7 32 bit a year ago. The disk also came with a 64 bit version but the upgrade required a clean install.If I decide to install the 64 bit version, do I lose everything on both drives?
View 9 Replies
View Related
Aug 10, 2011
Whenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
View 4 Replies
View Related
Oct 19, 2011
I use windows 7.When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.
View 9 Replies
View Related
Jul 21, 2011
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies
View Related
May 30, 2011
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies
View Related
Dec 23, 2011
Thats my computer settings. Currently my computer is running Windows 7 x86? How to I change it back to x64?
View 9 Replies
View Related
Aug 5, 2012
Hey I have an old Acer notebook with windows starter on it. I'm getting a new PC next week but it does not have an OS. I heard you could switch an OS from 1 PC to another. I don't mean swap the hard drive. I think your able to switch the product key. If i can how can i do this and will my new PC be good to go?
View 9 Replies
View Related
Dec 10, 2009
I am aware of the cavets for hardware and software when switching from 32 to 64 bit, but the question is this. I just bought the 3 unit upgrade which contains both the 32 and the 64 bit discs. I have an AMD dual core that will process the 64 bit. I installed the 32 bit version. Now I wonder, can I go back and install the 64 bit and if I do will I lose the extra install or will I still have 2 left on the 64 and the 32?
View 2 Replies
View Related
May 8, 2012
I have a computer that I bought refurbished and they loaded the 32 bit version of Windows Home Premium. I need to run the current version of Photoshop and it only runs on 64 bit.Need to do a clean install and I have no problem with that since their are very few programs on the computer.My problem is I have a disk from the Reseller that says "Windows 7 Home Premium". Will that also carry the 64 bit version of the software?Also the disk says "Licensed for use with the "Registered Refurbisher". I did license the software when I got the computer.I ran the Windows 7 upgrade utility and it told me the 64 bit is OK to load.
View 4 Replies
View Related
Jul 16, 2012
I want to share folders between my two computers A and B. Would also like to share internet thru ICS. Both the computers have windows 7.
This is the setup - One direct lan connection from router to A, then another lan on A is connected to a switch. B is also connected to a switch.
On A, I have allowed other network users to connect thru this computers connection (for the lan card which is connected to the router).
The other lan connected to the switch remains unidentified, in fact it gets APIPA with IP as 169.254.82.6.
View 6 Replies
View Related
Aug 12, 2010
Is there a switch for running as administrator ?To make it clear I mean something like thisC:program.exe /runasadministrator
View 1 Replies
View Related
Dec 27, 2010
I'm trying to find a switch that allows me to switch a DVI output from my monitor, to my tv.
I'm looking for this box, only for DVI, 2-Port HD15 VGA Manual Switch Box - Cables To Go
View 3 Replies
View Related
Mar 17, 2011
How to switch off 'wheel'? The scrolling control only goes down to 1. My touch pad scrolls can be a nuisance, causing sudden unwanted scrolling!
View 3 Replies
View Related
Dec 10, 2009
Can i format my C: drive to install windows seven if there is nothing i want to save. I am looking to permanently delete vista from my system. I was also wondering if i need to save any drivers for my laptop or if seven will install them for me.
View 2 Replies
View Related
May 31, 2010
I have my dad's computer already setup with Windows 7. For some odd reason being that there is only one drive in the computer. the computer's bios is set to RAID. I know you need at least two drives to perform any RAID functions. When I tried to switch over the SATA drives in the BIOS from RAID to ACHI, windows failed to start. Is there some proceedure first that I need to do before I switch them? Like a driver or does the hard drives have to be switched on a clean install of windows?
View 9 Replies
View Related
Sep 19, 2011
I have a router (Huawei EchoLife 520) with STB port for IPtv. I want to connect this router to my Prime router (Linksys) to act like switch so i can connect it to my Set top box (via STB port) because linksys has not have STB port for IPtv The reason is that linksys sync @ 20Mbit and Huawei as Prime router syncs @ 8mbit!!!! Ive try to do it (diable dhcp,nat firewall), and Huawei act like switch. Ethernet ports 1 to 3 shares internet to other devices but from STB port my Set top box returns DHCP error.
View 2 Replies
View Related
Feb 16, 2012
i have a 20mt ethernet cable going from my router along my loft to my gaming room to which it plugs into a network switch with 6 sockets for devices.Can i run another switch off of one of the plugged in cables to split another cable into 6 ports?The reason i ask is i need ethernet connections the other side of the room and dont fancy running any more cables under the carpet as i already have 3 computers and a server networked under it as it is
View 4 Replies
View Related
Oct 27, 2009
Just a home user. Mostly gaming. Home oriented stuff includes Office XP (2002), and Quicken. The other main software I use is Adobe Premier Pro CS3 video software (includes Encore, the DVD writing program), and Visual Studio 2005.
My system, isn't the latest, but newer stuff isn't a lot faster yet:
Intel core 2 extreme X6800 (2.93ghz)
Intel D975XBX motherboard, 2GB 667 mhz 4-4-4-10 ddr2ram.
ATI HD4870 (PCI Express) video card, 512 MB ram
Sound Blaster X-Fi Plantinum
4 Segate 7200.12 500GB sata drives, paired into two striped virtual drives via BIOS.
1 Seagate ??? 250gb IDE drive, used only for boot up.
All drives have multiple partitions.
Windows XP SP3 is installed on a partition on one of the striped sata drives.
Windows XP X64 is installed on a partition on the ide drive.
The second pair of drives are used for swap files, temp files, and backup.
There's also a USB drive I use for backup.
Each instance of OS is used to backup the "other" OS partition, and also I use X64 for for some 64 bit programming with Visual Studio 2005.
Other than one version of Halo, I haven't seen any games that don't run on Windows XP. I read that most games play faster with Windows XP than with Windows Vista, and Tom's recent article seems to state that Windows 7 isn't faster with gaming than Windows Vista.
So bottom line, is there any point in switching to Windows 7 (or replacing my XP X64 with Windows 7)?
View 8 Replies
View Related
Feb 24, 2011
How to switch from 64 bit to 32 bit windows 7
View 6 Replies
View Related
May 26, 2011
how do i link about 4 switchs on a network
View 1 Replies
View Related
Jul 30, 2011
i have an old desktop its really slow it sure could use more RAM but we never chip out the money for one (by the way it started with xp pro but i upgraded to win 7 ultimate) and now my computer is really slow and blacks out when i switch users and takes a really long time to come back again and ive been thinking about switching back to xp anyway i can do that, and if i did that would it make my computer faster
View 2 Replies
View Related
Oct 28, 2011
I currently have a 64 bit laptop, but purchased a 32 bit desktop. I need to transfer documents from my laptop to my pc, but it tells me it cannot do a transfer. I also tried saving them on a flash drive and just copying them over to the new computer, but it just looks like giberrish-like symbols. How do I just transfer my documents without having to manually retype them in the new computer?
View 3 Replies
View Related
Nov 15, 2011
Switch from 64 bit to 32 bit windows 7?
View 5 Replies
View Related
Feb 29, 2012
i want windows7 64bit to bit transfer setting .because my software not run in 64bit
View 3 Replies
View Related
Jul 10, 2012
i have an hp625 which just stopped whilst playing a dvd disc , then i forced it to shutdown by continuous press on the power button. then i cant switch it on now it keeps the light on the power supply illuminated but no start or anything.
View 3 Replies
View Related
Feb 15, 2013
I installed win xp on d drive and win 7 on c Drive same HD but does not appear os choice windows.Only win 7 open.
View 1 Replies
View Related
Dec 1, 2009
any one knows how to switch win7 64bit to win7 32bit? if its possible
View 9 Replies
View Related
Jul 1, 2011
i'm trying to add a second monitor so that i can't switch between screens... everything is set up but its just mirroring each other, i've tried detecting the second one but still nothing
View 3 Replies
View Related