Cannot Create A Homegroup Because User KYLO Already Has One On Network
Feb 26, 2012
So I checked on my network, just recently, and I saw some strange names connected. I saw BOYKA, KYLO-PC, RADULOVIC-PC, and my computer. I was freaking out, so I went to the DHCP Reservation on my routers setup and checked the devices connected. It was just my devices. But I still changed the password, but I was kind of reassured of the fact that it was probably just a program that accesses the network. But I googled all the names and no kind of software came up that may use these names displayed on the network, nor anyone else having this problem. I am worried that a people are accessing my network. Also, no one around my house has any of those names.Also I cannot create a homegroup because the user KYLO already has one on the network.
i recently notived that i cannot see my current logged in User on the network either in Homegroup or on the network itself. I can share other folders and files and see them but not my user..
I want to create a homegroup. Is it possible without having an internet connection? and after having a homegroup, i would like to play music from other devices through my pc speakers.
There are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
I have been using windows 7 pto and xp pro on my laptop and desktop respectively. It was connected in same network from very beginning. I was in same workgroup. But as I reformatted my laptop cpl of days back I needed to connect it again with my xp desktop. since then I am not able to do so. Have been tried almost everything. I am in a same workgroup also have run the network wizard from xp. But nothing working. But just few hours ago i uninstalled few drivers (IPv6 related , not sure) while trying to connect from device manager.
I have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
I had my computer at my home, connected to my home network. I moved to a Corporate apartment, which has a different network, and now I can't print to my printer, which I brought with me. I did set the new network as my 'home' network, and folowed instructions, but it does not seem to be working.
THe printer is a C6280 Photosmart, and is wireless enabled, but my new place doesn't have a router to attach to. Basically, I'd just like to connect the printer directly to my computer, since I will be the only one printing to it.
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
I tried to create a new user, and every time I try to switch to it, restarting my computer, or switching users, or turning off my computer then back on. It logs on, then says logging off right away.
After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
I have two computers, both use Windows 7, connected second computer to homegroup network but first one wouldn't connect to second. have now reloaded Windows on first computer due to other issues. Both computers see each other on network but neither will accept password to connect.
Is it just Libraries and Public and Personal sections? How are those different than mapping a new drive and setting permissions and/or passwords accordingly?
You see, I've been trying to make a new use account my computer, but I've been unsuccessful every try. I follow the standard procedure, Control PanelAll Control Panel ItemsUser Accounts , but that doesn't make the folder in, a) the registry, b) c:users<newuser> , c) User accounts password control (advanced tab) but it does show up in a) Control PanelAll Control Panel ItemsUser Accounts , b) Command prompt (net user).
I need to make my brother his own account, and I am looking at selling the computer to a friend, but he's not very tech savvy, and it'd infuriate his mother I have taken a screen shot of the case of the Control PanelAll Control Panel ItemsUser Accounts and the advanced tab in User accounts password control (I assume it's what it'd be called), and the command prompt, and I have added as attatchments.
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 4002 MbGraphics Card: Intel(R) HD Graphics Family, 1809 MbHard Drives: C: Total - 942032 MB, Free - 861358 MB; D: Total - 11733 MB, Free - 1435 MB;Motherboard: PEGATRON CORPORATION, 2AC2Antivirus: Norton Internet Security, Updated and Enabled
My account is a full administrative account. I need to create another user account for a family member. I go to the User section of Control Panel and add the new user, give the account a name with NO password and set to standard user. However, whenever I reboot my Windows 7 Home Premium machine, I get a red x with a message that says - "The username and password are incorrect." I can OK and continue to boot to my account. If I "Switch User" I can log in to the new account successfully. However, I continue to get the error message on boot instead of seeing the screen that shows both accounts so you can choose which one you want to log in to.
This is the tip of a horrible iceberg. Active links in the control panel don't open, as though I don't have permission to access the contents, although UAC doesn't appear. I couldn't install Paint Shop Pro and part of the advice was to create a new account (various reasons, not relevant to this post) but I couldn't. I have full admin rights. Elsewhere, device manager is empty (have posted elsewhere about this) so I can't check device conflicts. I contacted Dell support but had nothing useful back, except the advice that they don't supply W7 repair/reinstall software because it's 'preinstalled and so free' (really? thought I'd bought the whole kit and caboodle), I have to buy a new copy. I don't really want to do a fresh reinstall, although I do feel a bit unarmed without an actual copy of windows to hand
I am unable to create a new user account. I've tried the cmd run as administrator, i've tried starting is safe mode. It says I'm the administrator but I don't have administrator rights, the error message i get when trying to create a new user account is"The specified account name is not valid, because account names cannot contain the following character
I want to create a new windows user from regedit. Only changing regedit. Without changing in control panel. Is that possible? Can I do that? Only changing regedit.
I looked in google these days and I didnot find something that works.
As the title suggests, I want to create a user in win7 limited to its desktop (and desktop shortcuts) only. Should not be able to access my computer or any other drives or browse the internet
Environment: Desktop : Windows 7 Ultimate Laptop1 : Windows 7 Home Laptop2 : Windows 7 Ultimate
Laptop1 can view and access the libraries on the Desktop. Laptop2 can see the libraries on the Desktop but can not access the folders. I'm not sure what to do here, I've triple checked that libraries are shared on the Home Group.
You have already checked all your settings and have done everything right. Your hard wired network connections work fine. When you go to wireless all your homegroup and network locations or most of them vanish with no resolution.Quick Solution: Make sure the time your router is keeping is the same as your network computers, including turning on Daylight Savings if applicable.Explanation:There are several threads on the internet about Windows 7 not finding workgroup or network printers or computers on wireless notebooks. This was after people painstakenly went through all the trouble shooters, turned off and restarted their firewalls and antivirus, rebooted and rebooted, reset and reset over and over again, checked all their settings and did everything right and still could not resolve their problem.
There is a likely resolution for this problem - at least it worked for me. It took me nearly a week to find this solution.Occasionally, when running the homegroup troubleshooter, I got the message that the time was not the same on all the network computers. I went around and checked all the computers and the time was the same - so why the message?However when I went to the router, I found that daylight savings was not turned on and the time the router was keeping was an hour different from everything else. Low and behold when I corrected the time on the router all the connection problems were resolved on the notebooks.
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
when i use my admin account to create a new admin account i get stumped.i can create the account, set the password, and then when i try to switch users, i click on the new account admin2, and i get a warning that "unknown user or bad password"
I recently upgraded my PC from Vista to Windows 7. The PC had, and has, 2 users defined. Both of these user-id's are visible when I start Windows 7 and I can log on to either of them. Both are defined as Administrator.When I enter User Accounts via Control Panel I can see the user-id to which I am logged on. However when I select Manage Another Account it does not show the other user-id. Also if I try to Create A New Account from this screen it does not create it and no error message is displayed.I can try to create the same user-id adfinitem and nothing happens.
