Log Onto A Windows User Through A Local Network?
Dec 10, 2012
I also got Windows Server 2012 and 2008 from being a student for free. I have a few programs I would like to be able to run 24/7 and this seems like a good solution. The thing is I don't have a ton of space right now so I would like to only need 1 monitor/mouse/keyboard. I also would rather not use a KMV. At my school we are able to log onto our windows user account on any computer in the school by connecting through the local network. I would love to somehow set this up on my new server and regular PC but don't know what its called or how to research it. It seems very similar to a VPS or remote desktop but is not really either.
View 8 Replies
ADVERTISEMENT
Jan 17, 2012
So a new box recently built, when booted, defaults to the local administrator account.This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift. So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?
View 1 Replies
View Related
Jan 23, 2013
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
View 9 Replies
View Related
Oct 24, 2011
I just installed a W7 system for one of my users and I want him to be local admin. I cannot for the life of me figure out how to do this. How do I do this?
View 6 Replies
View Related
Feb 5, 2012
I have 200 folders in the C:/user/owner/local with names similar to {4BAD3A78-8A70-44D6-AD84-CF42571B0CD6}. All of them show 0 bytes, 0 files, 0 folders. What the heck are these?
View 3 Replies
View Related
Dec 4, 2011
i am using win 7 ultimate n.in my computer i am having two user.one is my account and another account is my brother's one.how to prevent my brother from accessing my local disk.eg:my local disk is d:.how to prevent my bro from accessing
View 4 Replies
View Related
May 22, 2012
do I copy dos programs to local disk C or to C on USER?
View 2 Replies
View Related
Aug 6, 2010
We are implementing Windows 7 and Bitlocker as encryption. While this works brilliantly, I am now worried that our offsite engineers if they are given Local admin rights, can disable bitlocker. They need to install software onto there machines and this cannot be taken away from them. Problem is company policy also states that they are not allowed to disable the encryption, which is where my dilemma lies. I can lock down bitlocker through Grou Policy, but the offsite engineers are software developers so it wouldn't take them long to disable it if they do have local admins. Is there anyway at all I can give them access to install software without Local admins?
View 3 Replies
View Related
Dec 27, 2010
I just upgraded to Windows 7 and was going through a process of organizing the "libraries" and I noticed (possibly of my own doing but am not sure) that the second drive in my system (B) was sitting there in my user folder. My question is, is that normal? How did it get there and how do I correct it if it isn't suppose to be there.
View 9 Replies
View Related
Jul 7, 2010
what is the difference between a user, who is member in the administrator group and the built in administrator.and is there a possibility to grow up a user to a built in administrator
View 1 Replies
View Related
Apr 19, 2011
I want to make domain user as local admin on his system which he logged in on windows 7. How can I perform this?
View 5 Replies
View Related
Sep 17, 2012
actually i put a server,and to create one system as a domain member , that was not installed properly that why i delete this active directory and reinstall and to make a domain members except that system
View 1 Replies
View Related
Jan 17, 2013
I'm trying to run a script at the end of sysprep that will add a Domain group to the local Admins group. I found a few scripts while searching around, but none will work for my application.
This is what I have so far.
Code :SET objNet = CREATEOBJECT("WScript.Network" )' Set the user you want to make local administrator herestrUser = "<username here>"strNetBIOSDomain = objNet.UserDomainstrComputer = objNet.ComputerNameSET objGroup = GETOBJECT("WinNT://" & strComputer & "/Administrators,group" )SET objUser = GETOBJECT("WinNT://" & strNetBIOSDomain & "/" & strUser & ",user" )' ignore error if user is already a member of the groupON ERROR RESUME NEXTobjGroup.Add(objUser.ADsPath)ON ERROR GOTO 0
The problem I'm having is that I need to be able to provide a username and password of a domain admin so that it can authenticate. how to do this when I try to add the user.
View 4 Replies
View Related
Feb 5, 2012
I'm creating a local group policy to lock down a Windows 7 Pro Workstation for use in the Staff room.It's the first time I've used it, previously I've worked a bit with AD. but I've been following on line tutorials and using google and I'm nearly there with it.But I'm stuck on one thing. My approach has been to remove access to pretty much everything apart from IE, Firefox and Skype icons on the task bar. I've got the start menu empty apart from the shutdown button, which is what I want but at the top of the start menu is the users icon/picture thing and if i click on it it takes me to "user accounts". I can't for the life of me work out how to get rid of the picture or just stop this happening.
View 1 Replies
View Related
Nov 4, 2011
I have a base image, where I have configured the default profile using the administrator account. I created user ids, but did not log into these idsI used Local Group Policy to edit the policy of one non administrator ids I created. After sysprepping the computer, and successfully copying the profiles, the user is not configured with the group policy settings.Same deal as this guy Sysprep deletes Local Group Policy but his question was never answered.
View 2 Replies
View Related
Jan 27, 2012
I have this problem on a couple machines. I have created a user and put them in the local administrators group. They still get error messages when trying to install printers/browsers/programs and whe they try to run programs like IIS or device manager. The error says you need administrator rights to install or run the program. I have also disabled UAC to test that out. No luck.
View 5 Replies
View Related
Jun 4, 2011
A week ago I put together a new computer and installed Windows 7 Ultimate 64 Bit, every thingy installed just fine even the Ethernet drivers that came with the Motherboard disk installed ok, but I get 'Unidentified Network' for my network and only local connection. I have reinstalled the drivers many times. I am on another computer hooked up to the same router and modem, but it is running Vista instead, but the internet works just fine, and it is using the same cable as my other computer so it can't be the cable.
My computer Specs:
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz
MSI NF750-G55 AM3 NVIDIA nForce 750a SLI HDMI ATX AMD Motherboard
EVGA 1GeForce GTX 550 Ti (Fermi) [2x - Sli]
SAMSUNG 1TB 7200rpm Hard drive
G.SKILL Ripjaws Series 8GB (2 x 4GB)
View 9 Replies
View Related
Jun 5, 2011
dell has informed me that my problem with my PC Is that windows 7 can't reconize the local network interface driver and told me that it's a software issue. I reinstalled the local network interface driver from the original cd that came with the PC and 2x's restored the computer to another time and then restored it back to the factory settings-with a Dell tech on the phone- nothing helped. This problem started one morning when lighting was felt/heard very close to our home and in fact burned out our verizon moden/box that Verizon replaced. From this point I wasn't able to go on line because there was no local network avail for verizon to connect to is how I understand it.
View 9 Replies
View Related
Jan 26, 2012
i can't share full hard drive in windows 7 local network
View 1 Replies
View Related
Oct 22, 2011
I connect at home wirelessly with no issues using Windows 7 Ultimate on my Fujitsu laptop. I don't really understand all the different types of network but currently I share with no one, and under the network settings it states 'Home Network' and then 'Ready to Create.'I was away for work recently at another site and they have an open wi-fi for visitors to use on non-work laptops, so it's passworded but other than that, it's totally unrestricted.When I tried to connect it found the wi-fi network with full strength but would not identify and connect - the password was okay as I when I tried an incorrect one, it stated just that.
View 6 Replies
View Related
Mar 26, 2012
I have a POS application.I'm using one thermal printer connected to COM1,I create a bat file wit this command :
copy mydata.txt COM1:
I run this bat and printer is working fineI've installed my application on a second computer in the network and I need to print from there to the same printer,but is located on another computer.So how I use COM1 over local network?
View 6 Replies
View Related
Apr 27, 2009
Alright, so I just did a fresh install of Windows 7 build 7086 x64. Everything works just find, except my network adapters. I'll detail system specs after I explain the problem.
When i connect one of my cables, the computer attempts to identify the network. It doesnt. I check IPconfig, and it gets all DHCP information from my Linksys router, but no internet connection. I have IPv6 turned off on both adapters, as well as the VMnet adapters i use for VMware Workstation.
I attempt to ping google.com and it comes back, ping request could not find host
I attempt to ping the router, and says host unreachable.
(IPconfig data - Local Area Connection 2) (Local Area Connection 1 shows up the same with IPv4 Address 192.168.1.102)
Connection-specific DNS Suffix : oxfordnetworks.net
IPv4 Address : 192.168.1.103
Subnet Mask: 255.255.255.0
Default Gateway : 192.168.1.1
The Gateway itself sees the Win 7 computer, but when i ping from the router to 192.168.1.103, it times out.
Also, I attempted to update the network drivers using the Intel Pro v14 Vista x64 drivers, and the installer wouldnt let me install the drivers because of "software not built for your operating system".
View 3 Replies
View Related
Jan 17, 2012
imple question: why does a shortcut to an exe on a network-drive display differently from one on my local drive?It's the same file, but the network ressource version looks FUBAR, while local version is pretty nice.Perhaps more to the point: any hints on changing it. The particular exe is compiled with an ico containing: 48x48 px, 32x32 px, 16x16 px (all in xp, hicolor, 16 colors). It looks like windows is displaying the 16x16 px version, and then resizing it, and perhaps adding a dash of ugly
View 4 Replies
View Related
Jun 5, 2012
I can connect to my router, and the icon shows "Internet Access" and I can access my shared folders. But I can't access the internet. I've got both IE and Chrome and both do not work.
View 4 Replies
View Related
Mar 25, 2012
I have few computers at home and i created one computer as home theater pc and second pc as file sharing and nas
PC 1: Home theater pc
PC 2: Home files and NAS server and more
PC 1:
AMD 3 Tri core 4GB ram Graphic card , TV Tuner with remote and ssd drive
PC 2: AMD Atlon Quad Core AM3 , 16 GB ram , Gforce 210 graphic card , ausu sat 3.0 control and all AM 3+ features 970 chip set and 1 160 GB Hard drive for OS windows 7 enterprise and 5 ( 2TB Hard drives ) and 1 1TB Hard drive all between 32 MB and 64 MB ... NO SSD
Network:
Asus Routor 1GB all across
CAT 6 and CAT 7 eithernet cables
1GB Switch
1GB nics on all computers
Docs 3.0 Cable Modem
Issue: when i try to stream media files ... WMV , DVI , DVIX , MKV H264 , and other format files all in HD 1080p and 720P and HD Sound ... i get hicups or latency in playback or windows media player will not respond ... i have k-lit codecs 32bit and 64bit installed and supporting Blu-ray i have power dvd and win DVD 11 and Windows media center properly setup with tv tuner and remote control all pc are wired connected , firewall off on all pc , windows files and printer shirring is on and Home Network is setup so i am able to see all my pc and devices and able to transfer files between computers with no problems sometime i am able to transfer files at 85 MB/s to 120 MB/s but still media streaming is not working properly ... i tried for test to use media player classic and other software like VLC same results I have tried this setup before but it failed because i did not have proper setup but now i have all networking gears , Hardware , and software and nice home setup Meida streaming on the routor is on ... and firewall is off on the routor for local connection GUP Power need to be in Media center pc has been fix with brad new DDr5 1GB 775 chip graphic card with HDMI connections and sound is via HDMI to Samsung 120 hrz HDTV LCD and for extra gpu i added gforce 210 on files server but results are all negitive on Media streaming and watching movies from one center place like my PC 2 which has 11TB + 160 GB 32MB Hard drive ..Both computer are supper fast and have Windows 7 ultmate and enterprise and my other pc are file server and second media center pc which i am building for my bed room?
View 5 Replies
View Related
Sep 21, 2012
We've got our machine plugged directly into the modem and it previously worked fine. At some point something happened and now I have to connect via wireless. When I go the Network and Sharing Center and click "Change Adapter Settings", the only thing in the folder is "wireless network connection". I know the plug in connection works because I tested it on a laptop. I can even find where I can "opt in" or enable a LAN connection.
View 1 Replies
View Related
Apr 6, 2009
Windows 7 build 7057 EEE 1000HE
I seem to have a situation where my wireless connection does not include my local network, so I cannot see or connect to any local computers on my network but I can connect to the Internet just fine wirelessly. Of course, if I wire into the Ethernet port I can see the local computers. I know I should be able to access the local computers wirelessly but I cannot seem to find the "switch" to combine local and Internet access.
View 4 Replies
View Related
Apr 1, 2009
I have just reinstalled Windows 7 64 bit and it won't see my local network. I'm running a hardwired network, my switch is a netgear RP614 set to act as a dhcp server. I had the 32bit version of windows 7 installed and that picked up its network address fine to start with and then just stopped working. I have tried hardcoding the ip address onto the network card but that makes no difference.My xp machine connected to the same network works fine.
It appears that windows 7 isn't picking up the ip address from the dhcp server as it should. it gets a default address of 169.254.107.37 whereas my network is 192.168.0.0 I have put in the default gateway and the dns server addresses that my isp uses but this makes no difference.
I have tried turning off the dhcp flag as recommended by microsoft in case that is the problem but that made no difference and it was working under 32 bit for a while without the flag turned off.
I have installed the nforce drivers in case it was the windows drivers causing the problem that made no difference. I have run a network capture and that shows that it is seeing the dhcp packets from the dhcp server.
I have done everything I can think of and everything I can find recommended by Microsoft but all to no avail. Any help with this greatly appreciated as I really like windows 7 and don't want to have to downgrade my system.
View 5 Replies
View Related
Apr 29, 2011
why, when connecting wirelessly under Windows 7, to a wireless access point I am unable to change the "Network Type" from Public to Home, thus no connection to the Internet is allowed? I cannot change any of the parameters of the network at all. Under XP on the same network I have no problems at all.I have set up three access points by simply adding additional wireless modems (of the same brand as the primary modem), turning off DCHP and U PnP and assigning a unique IP address, to avoid DCHP conflicts (as I understood it).Which change would I have to make to the access points such that Windows 7 fully recognises each access point and allow me to assign them to type "Home"?
View 3 Replies
View Related
Apr 17, 2012
Stuck with my local area connection problem.I can not access my internet,under networks options there is no local area connection or any thing like that.I have also tried to format my computer to fix the error but no success.I have also tried to uninstall and then install the drivers but it was of no use but when i troubleshoot the it says the drivers are not installed properly.
View 8 Replies
View Related
Oct 17, 2012
My PC's network card is configured as 100 Mbps My NAS Drive is configured as 100 Mbps
My Home Hub 3 shows both connected at 100 Mbps, yet I'm getting a maximum of 1.3M transferring a file to the NAS.
Is there any way I can increase this ? I get the same speed from my 20Mbps download from my DSL.
View 1 Replies
View Related