I have a Toshiba Satellite running Windows 7 home pre and a desk top running the same. I want to network the two together so I can share external Hard Drives and such. I want to do this so the files can only be seen and or read by my two computers. I have a room mate who is also running windows 7. What can i do to make sure he dose not have access to my computers?
Both are connected to the internet VIA wireless connection. ( router in room mates room ) I have both computers connected together via a cross over cable also.
I tried to read the tutorials from this forum regarding networking. I am too dumb to understand. They are all Greek to me.
Is there a " How-to for Dummies " instructions for connecting my 2 laptop computers ? Windows Vista Home Premium 32-bit SP2 Windows 7 Home Premium 64-bit SP1
They are both wireless enabled, but because my Vista computer battery refuses to charge, it is always plugged in. ( $124 for a battery replacement ? No way. ) In fact both my laptops are plugged in all the time. ( don't laugh ).
I've spent 2-3 days now trying to solve the networking mysteries of Win 7.
In a nutshell. This computer (Windows 7-64) cannot see the other computers and shares on our small studio network except for the windows 7 machines (also Windows 7-64). (the other computers/shares are all XP)
We have 2 identical machines side by side, one can see all the computers, this one cannot. Both are fresh installs.
There are approx 8 other machines/shares on the network.
Both computers have vista installed on a seperate drive that see the network fine if booted into.
Both have homegroup turned off, and have workgroup enabled with the same workgroup name "WORKGROUP". Both have discovery and file sharing enabled. Both use the same network controller, and have the same updated Windows 7 driver.
-I have tried turning on/off iv6 (which I see some people think/don't think is an issue).
-I have disabled FIREWALL
-I have disabled anti-virus
-I have rebooted after each change
-I have tried different locations/cables on the hub
-I have tried the cable/hub location on the Windows 7 computer that is seeing the network computers.
ps. I forgot to mention that if I type in the IP address in addres bar I can access one of the other machines, but it will not show up in the network window.
I am really at a loss, and have read about every post I can find, and tried every suggestion.
Which should I do. Its my home office computers. I'd like to be able to access files between both machines. Doing this, what precautions should I make that noone can get into my system? I'm a little hesitant to share ALL files on both computers between each other. But i'd like to!
I'm playing with Sharing now but i'm noticing that sometimes when I save a file on one computer it isn' accessible to the other computer until I right click and SHare it. I thought by sharing the folder it would just share every new file. Is there a way to do that?
I will ask for Leopard first since this is what most people are using.
I tried to set up the networking with the Apple machines last night to no avail, rather, this morning. Has anyone had success doing so? According to everything I have read, it should be fairly straight forward, yet it is not connecting.
I am trying to figure out how to network my laptop with my desktop. I have a Qwest DSL Wifi router. My desktop computer is hooked up to a Vonage device/router and then the Vonage device is connected to the DSL router. My laptop is connected to the Qwest router by Wifi. Also, the deskop and Vonage device are setup with a static IP. Is there any way to network between my desktop and laptop so I can do file sharing?
when i update my windows 7 to sp 1 doesn't show other computers in my wireless network and can't ping other PCs but when i connect to wired lan every thing work fine firewall is off,network discovery is on,no antiviruses has installed and microsoft security essentials is fully disable?
i am quite disappointed to see the lack of support for Microsoft's Virtual PC networking configurations. If there is anyone that can help me with this,I have Windows 7 Ultimate x64 as primary OS installed. I have also installed Microsoft Virtual PC 2007 (not Windows XP Mode). Inside this virtual machine, I have installed Windows XP Professional (x86). I need to have the Windows XP connect to Windows 7 via networking. According to most threads, I need to install Microsoft Loopback Adapter in Win 7 to be able to connect the VM to Win 7. I have configured the loopback adapter (on Win 7) to use IP 192.168.1.1, subnet 255.255.255.0, no default gateway and DNS server addresses. On the virtual machine, I have set the LAN connection to use IP 192.168.1.2, subnet 255.255.255.0, no default gateway and DNS server addresses. No connection.
Sorry but I'm sure this is now old hat. I've been networking PCs successfully since DOS 2 days but Windows 7 has me ****ed.
I have two PCs running XP and a BT router both work well but have just bought my wife an HP Netbook running Windows 7. I have set up the network 4 times but everytime I restart the Netbook all settings are lost, the shared printer and doc folders are not there and with the exception of a Windows Media folder on the XP desktop NOTHING is visible.
I suspect that it will take at least two hours to set it all up again but if anyone can give me a quick fix or tell me why it can't remember anything, or even the name of some network software that works, you'll be my friend for life!
I have a lan network between two computer and one of them has windows xp running and the other one has windows 7.I didn't have problem with xp but in 7 when I go to network and want to open the shared drive on the other computer it shows me a new window and it says Enter network password .This problem isn't with xp.
I have 4 computers on my home network. Laptop runs Win 7 Pro; Storm runs Win 7 Ultimate; S-Mach runs Win7 Ultimate (64 bit); AMD64 runs Win 2K. All have the same login and password. Win 7 machines have network discovery turned on. All in the same workgroup.
Laptop sees all machines but can't access S-Mach. It can access all others.
S-Mach sees all machines and can access all drives and folders.
Storm see only Laptop and can access it. Network map shows S-Mach but it does not show up in Network.
AMD64 sees Laptop and can access it; nothing else.
All machines are set up for sharing with full control permission to Everyone.
When I try to access Storm from AMD64 I get the error, "Network path is not found"
I decided that I wanted this cheap dell laptop to run faster, so I used a tool to "strip down" my windows 7 32bit. It worked stupendously well. Everything seems two or three times as fast now as it was before.
BUT, I now have no wifi access. I confirmed that the wifi drivers are installed. They register as "working properly" but I am not finding ANY wifi signals. The problem is within the computer somewhere. Other computers in my home find 5 or 6 signals (as this one used to). The strip down tool also removed the network diagnostics feature of windows 7, so I am without recourse.
I am, however, able to connect to the internet through my iphone (pdanet) being directly connected to my laptop.
I'm looking for some assistance to the above problem I'm having with my desktop. I am unable to connect to the net through this PC, however, the net connection is working fine as I am currently connected wirelessly via my laptop. The icon on the tool bar has a red cross indicating that I'm not connected, when I click on the icon it tells me no connections are available. When I try to connect to the net via the PC through the control panel, a message pops up saying' Windows did not detect any networking hardware'. When I try and acces the basic information and set up connection page, a msg states 'The dependency service or group failed to start.
So here it goes. my pc is HP Compaq SG3-351SC.and lately its gone reeaally slow, and its full fo junk, so i decided to clean it and reinstall windows. So when i bought this pc i made backup copy while making it i got whole punch of all kind of errors. and now that cd didnt work. couldnt install windows from that back up. so my friend borrowed me his cd that included windows 7 ultimate. i installed it and all went great. but i cant conect to internet, im gettin this message "windows did not detect any networking hardware" i know its about some drivers. now when i go to control panels device manager, there is yellow triangle mark on ethernet controller.
Can Windows 7 change the perception that Windows Firewall is security you use until you install protection that actually does something?
Like Rodney Dangerfield, Windows Firewall just don't get no respect. It didn't evolve appreciably in the transition from XP to Vista. It does its simple job well, but its lack of ambition makes it a punching bag for reviews of other, better personal firewalls. I can't tell you how many times I've written sentences along the lines of, "Sure, Product X stealths all your ports against hack attack, but heck, even Windows Firewall can do that." Good news: It looks as if Windows 7 will pull the firewall out of its slump. Some new features are visible and functional even in the pre-beta I've got running on my test system, and there's a tantalizing suggestion of more to come.
Hangin' with My HomeGroup
The firewall exists to protect your network, and Windows 7 starts by making it easier to configure that all-important home network. When users hit network problems, they curse the firewall—and they're often right to. Windows 7 addresses the problem by taking over home network setup and making sure the firewall doesn't interfere.
I recently re-installed Windows 7 and I can no longer connect to the internet because I am unable to find the network, after checking my device manager I need to update drivers for ethernet controller among others and am unsure of how to do this with no connection and if it is even my problem!
I was trying to overclock my computer using clockgen and then after I closed the program, I noticed that my Internet had a red x sign on it. I troubleshoot it and it said that Windows did not detect any networking hardware. I went to Device Manager and I saw a Unknown Device below Other devices. I check the Details of that Uknown device and it said *SysToolDevice. Yes, I tried SysTool this morning and it didn't work, so I decided to delete it.
i just bought a dell latitude D40 which has win 7 starter installed for the OS. i have 3 other pc's all networked (home network) together and all have win xp prof. i would like to network the the dell (win 7 starter) to the other 3 computers but after doing some research i find that one of the pc's on the network must have win 7 for an OS.just to be sure i'm understanding correctly, is this true ? I'm probably going to have to reformat and reinstall windows on one of the pc's on the network pretty soon. when i reinstall windows, could i install win 7 starter or would i need to install the full blown version(so that i can network the laptop to the other 3 already on the home network
The other night I had noticed that the sound, networking, and USB drivers have failed on my laptop. I ran a full system virus scan on my comp, but nothing came up as malicious. Anyone know how to resolve this issue? I would prefer not to reformat my hard drive at all costs.
I just switch to Windows 7 last week. It's Windows 7 Home Basic Edition.In my old XP, there's a green networking icon at right bottom corner, when there's traffic, it flashes. This icon is useful when i downloading large file so i can tell that if the downloading is still active. In Windows 7 i don't see that green flashing icon?second question. I have an old TV card, when I plug in, Windows 7 installed driver automatically.. so driver has been installed.. but how to watch TV? the TV card comes with an application that is not compatible with Windows 7
I have two Windows 7 PCs on my boat. Normally they are connected to the Internet via a 3G Wireless Router; they are therefore on the same Home network, so I can access the shared folders between them.
However, occasionally I connect at least one of them to a WiFi HotSpot, to save my monthly 3G download limit. Even if I connect both of them, I can't access the shared folders, as it would be foolish to designate a Public network as a Home network.
Is it possible to maintain a permanent BlueTooth network between them, regardless of what they are doing via WiFi?
I have a home network, based around a wireless router which our internet is distributed by. The connection is fine for internet but not great for file sharing.I take a lot of pictures and save them all on my desktop pc. This is sadly a windows machine running Windows 7. I have been using this for a good few years, it has an internal RAID5 array which I store the images on.I am not looking to access these files from my mac using a faster interface than the wireless which is already set up. My mac has a gigabyte ethernet port as does my desktop. I have purchased a crossover cable to save buying a switch.I have set up file sharing on the wireless network which work albiet very slowly by looking on the network on my mac, waiting till my windows machine appears, logging on using my normal credentials and having access to my files.
If I try and make the mac use the wired connection instead by going to the finder Go>Connect to a Server and then typing in 192.168.0.100 for example in searches for about a minute and then returns nothing. I can ping the machine and get a response.From what I can diagnose myself is that the unidentified crossover cable network is not liked by windows at all and won't allow sharing of files. This is just an inkling though.
Three Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
1. my machine is a Getac B300 with a Windows XP Professional 32-bit/Windows 7 Professional 64-bit dual boot.
2. My wife's machine is a Toshiba U500 with Windows 7 Professioanl 64-bit.
Normally, I use the U500 as a hub: I connect it to the internet using a 3G-enabled Sony Ericsson Elm that I control through Sony Ericsson PC Suite 6.011.00* (I have an unlimited connectivity plan.) As soon as the U500 is connected, I set up a WEP-encrypted ad hoc network and connect my B300 (regardless of which system I happen to be booted into) and my wife's iPhone.** I can do the same if I choose to boot into Windows 7 on my B300 and use that as the hub.My question however, is as to why I can't get this whole setup to work out with Windows XP. I normally use the exact same way to connect to the internet (Elm and SE PC Suite), and I've attempted to set up an ad hoc network when I'm booted into Windows XP (through Windows and through Intel Proset), and I even managed to get the U500 and my wife's iPhone to connect to the network, but neither machine would get any internet access, even though I made sure to turn on Internet Connection Sharing for the connection.So I'm beginning to wonder if it's even possible to get it to work with XP (as opposed to 7) being the hub.
Re: NVIDIA nForce Networking Controller win 7 64 bit drivers for dfi lanparty ut expert I get the message: Networking controller could not start. Code 10.
I have put together my first computer build and so far ive got everything to work, without any major issues ive installed windows 7 64-bit and then motherboard drivers and graphics card and havent had any issues using the different features of windows 7. I then decided to get a 300Mbps Wireless Networking PCI Express Adapter from TP-Link to get access to the internet i already have in the house. I inserted the card in one of two approporiate PCI slots on the motherboard (Asus Sabretooth z77) that was next to the graphics card. But when i turned on the computer and windows 7 started up it started a full system reparation (my systems in swedish, "startreparation" in english windows?) for what reason i have no idea as it came up with no solution and all i could do was restart and try again, but to no avail.
I have ran the BSOD Dump & System File Collection app with the results attached. I attempted to run PERFMON report but was unsuccessful (Error: cannot find specified path).
I am running Windows 7 Home Premium (64 bit) and this is the original OS that was preinstalled with my laptop (ASUS G60VX). The system is approximately 2.5 years old and I have never re-installed the OS.
I continuously run system mechanic to monitor and clean out the drive and also use Norton 360 to supplement system mechanic. The system was gradually slowing down and occassionally freezing up. I upgraded the CPU with a T9600 chip and the system seemed to run fine but the temps definitely increased (fan constantly running but rpms varying with temps); I use SpeedFan to monitor temps. The lagging once again started so I had a deep scan and repair of the hard drive performed; took all night to run. This was done approximately one week ago. The system afterward now continually shuts down (BSODs) with no rhyme or reason. I do not know if it is hardware (GPU or hard drive) or software. I have re-installed the original CPU to see if this was the problem but the BSODs continue.
I am capable of operating in Windows Safe Mode with Networking.
i've totally messed up my network in Windows 7 and now want to reset it to factory settings (delete ALL present network adapters & then install only the basic default adapters)
I've got a new copy of windows 7 (32 bit version) I have got 4 GB ram only 3,25 in use (like I had on the XP version, running on the same PC) and after I boot up the PC I just look at the desktop, play with some random games, create and delete folders, do some little stress to the RAM or sometimes just doing nothing. The only boot that works is safe mode and its variants.
Things that I've done in the past 7 days:
-I checked RAM integrity - no errors
-Everything is up to date (drivers, everything) - it hanged/froze even with a fresh copy of Windows 7
-I use wireless if that is a problem, found some errors about it and will post them after this list
-enabled services and disabled them VIA msconfig (toying around I found out that it WONT CRASH with any internet service on normal mode)
-I checked Windows 7 compatibility and it's 100% compatible
-Tried to update BIOS but I don't think it will solve anything anyways
-Used dozens of registry cleaners (CCleaner and lots; lots more) - still nothing
-Put a second HDD on my machine with Windows 7 same version, it still crashed, but on the second machine the second HDD works great.
Event 7001: The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
Event 10005: DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-505054503030}
I set up my 7 machine on an XP network. The 7 machine sees the shared folders, and I can get to them with no problem. When I try to look at the 7 machine from the XP side, it asks for a user name and password. I never set one up, because I would like to run an open network. (I live a mile down a limerock road with no close neighbors.) Can someone tell me what I'm doing wrong?
Why in the world did Microsoft change the default network name?
I have a new PC running Windows 7 RC, but I can't get it to find the shared folders on my Macs, nor can my Macs see the shared folders on the PC. Any ideas how to get at least one way working?
I'm running 10.5.7 on the Mac, and if I "Connect to Server" and dial in smb:// and the PCs IP address, I get a login window, but it won't let me log in. It says I have incorrect user name or password. But I have no password on the PC.
Also, I followed the advice in another post, Accessing Mac and windows 7 on same network - Mac Forums), but it didn't make any difference.
