Bios/windows 7 Not Recognising Hard Drive?

Nov 16, 2012

recently had a few parts die on me so i have started to rebuild a whole new comp my motherboard is a asrock 970 extreme3 cpu is a fx 8-core black edition and gpu is a gigabyte hd7850 2g gddr5 with a seagate 1tb barricuda 7200 hdd now thats out of the way my problem is im trying to reinstall win7 but neither my bios or win 7 rrecognising my hard drive i get stuck at where it asked me where i want to install it to i try load drive but as i said

View 1 Replies


ADVERTISEMENT

It I Not Recognising Hard Disk Drive

Apr 19, 2011

I have an enclosure with my hard drive in it and connected it to the computer it was not found and i think its because its disabled i go to computer manage disk managemtent and recovery disk,i click properties click on my hard drive (toshiba...) click enable, then i click next and it says windows was not able to enable the hard drive

View 1 Replies View Related

BIOS Not Recognising / Displaying Drives?

Jun 16, 2011

i recently invested in a new PC - for my job i use high volumes of data so need a high end database setup for fast access to info - to do this i have invested in two SSD hard drives that i am hoping to run in a RAID array and these are completely dedicated to my database. So after alot of work i have my machine up and running, it has a 60GB SSD for running windows 7 64-bit home prem. on, 2x120GB SSDs that will run my database and a 1TB SATA HD for storing whatever else i have on. Now the part i am having real trouble with is configuring the RAID array, firstly in the BIOS main menu i dont see the 3 SSD drives:-However the drives all show up in the windows disk management window. Back in the BIOS, when i enter the SATA config. menu, i find that ports 1-4 are grouped together (currently set to AHCI), and it is possible to switch them into a RAID array but this is no good b/c it means my 60GB boot drive wont operate correctly - i cant seem to find a way for switching the individual ports to RAID, mainly since the ports arent listed individually?

another thing that i am unsure about is the way the drives are listed in the boot menu - they show up listed as IDE's although in the SATA config menu they are listed as AHCI controlled - i am unsure but think this may be a glitch with the BIOS for this motherboard where it doesnt update changes properly.

View 3 Replies View Related

Hard Drive Shown In BIOS Not In Windows

Aug 29, 2009

I just installed the RC last night and everything was going okay until I restarted my computer and my backup drive disappeared. It was accessible until I restarted, I didn't install any new drivers.

It's an IDE drive.. it doesn't show up in Disk Management either so I'm kind of stuck at what to do. Any ideas?

View 2 Replies View Related

BIOS Won't Detect IDE Hard Drive

Dec 30, 2011

On my old secondary computer my setup was
Motherboard: Chaintech VNF2-350
Master 0: HDS722516VLAT80 with Windows installation
Slave 0: WD800BB-53CCB0

But then I started getting Machine Check Exceptions and my motherboard ultimately perished. So I replaced that with a Foxconn K8S755A-6ELRS. But this new motherboard won't detect the hard drive.

It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang until you unplug the cable.

If it's on the same channel as the Hitachi drive with XP on it, the BIOS recognizes the other drive, but fails to boot from it. If they are on different channels, it boots the XP drive but will see no hint of the drive on the other channel., even in Disk Management or Device Manager.

I also tried connecting it to my other computer's Intel DP35DP mobo, and it was able to detect/read/write and all that, though it does have a few bad sectors.

View 4 Replies View Related

Hard Drive Not Being Detected In BIOS

Apr 30, 2012

My hard drive, a WD Scorpio 200GB, is not being detected in bios. AHCI mode is enabled. When I go into the Advanced BIOS Features, all the master and slave configs are none; however, my SSD is recognized as I am on my computer right now using it. I tried every SATA Port, EVEN THE SATA PORT MY SSD IS INSTALLED ON, and it doesn't work; I tried 2 different cables and still no recognition; I tried 4 different hard drives and still no recognition, so it is not a problem with my motherboard, hard drives, or cables. What should I do? I have been trying to figure this out for 4 hours.

View 7 Replies View Related

Formatting Hard Drive From Bios

Jul 24, 2012

i need to completely remove all from my hard drive so that i can run my restore discs i purchased from gateway- my computer is 6 mos old and came without dics as it had restore capabilities pre installed from factory.

View 2 Replies View Related

Hard Drive Stopped Working / Cannot Get Into The BIOS?

Oct 12, 2011

I have had an expensive time with my computer recently but i am now beyond the brink and turning the tide of war to my favour.I have recently kitted my ailing PC out with a new SSD for the OS install.This is working great; i have just tonight had to plug in a brand new GFX card for my gaming pc.(My GFX card burned out due to overheating, so i have now got a new case and proper cooling)Basically, my secondary hard disk (Files Storage etc) is not working, when plugged into my sata port my computer hangs at the Windows Loading screen, also i cannot get into the BIOS.If i unplug the hard drive (Not SSD, 500GB Hitachi) my computer boots in 14 seconds, and the bios works fine.I have concluded my secondary hard disk may be broken.if i can fix it as i can barely afford to buy a new one (even knowing they are cheap).Basically if it had broken i would expect my PC would say so, seems to me that it is just waiting for a response and sitting around for hours to get it

View 4 Replies View Related

Intermittent BIOS Hard Drive Detection

Jul 5, 2011

Working on my friends desktop computer and the BIOS doesn't detect the hard drive all the time. If I cold boot or reset the machine the hard drive is not detected. However if I pull the CMOS battery and power cord then drain the capacitors (by pressing the power button) and replug the power the drive is detected by the BIOS and starts booting windows (then freezes). The Computer can boot from CDs fine (from IDE cd drives). When I power up the machine without draining all of it's power/ removing the power cord the BIOS gets stuck detecting the SATA drive. I tried the Hard drive in my machine it and worked fine so I don't think its a drive/cable problem. I also tried one of my known good WD drives in the machine and it doesn't detect it. I have tried replacing the signal cable. Default settings (no options for IDE/AHCI just enable or disable SATA). I'm not sure if windows freezing is a 2nd problem or part of the first.

Motherboard: Gigabyte GA-k9ns Version F9
Drive: seagate 500gb sata (also tried a WD green 500gb & black 1TB)

View 5 Replies View Related

SSD Hard Drive - Use SATA As IDE Or AHCI In BIOS

Sep 28, 2012

I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.

But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.

I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.

View 4 Replies View Related

Hard Drive Recognized In BIOS But Not In Win7

Dec 9, 2009

hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.

WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit

View 4 Replies View Related

Boot To BIOS And From External Disc But Not From Hard Drive

Oct 11, 2012

My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...

View 4 Replies View Related

Hard Drive Not Detected By BIOS Or Disk Management?

Aug 27, 2011

I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.

View 29 Replies View Related

Lots Of BSOD / Lock Ups Or Hard Drive Not Being Detected By BIOS

Apr 13, 2012

Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a year after building it).

It all started with a blue screen.
KERNEL_DATA_INPAGE_ERROR
Reboot windows and it seems to start up fine, gets to the desktop and locks up.

Reboot windows and I get another blue screen.
BAD_SYSTEM_CONFIG_INFO

I try to start windows from the last good configuration. Error. Registry file failure. Cannot load hive file. I try booting from the windows cd and running a chkdsk. Hard drive starts making a buzzing sound. It gets to step 3 of 5 and stops. Failed to transfer logged messages. Status 50. Now the bios rarely even "sees" the drive. When I can get it to boot and see it, any attempt at diagnostics and repairs produces errors, locks up, or fails.

Is this a bad hard drive? I would hate to spend the money on a new one only to find it is a bad mobo or virus. How can I diagnose this? If it is a bad drive I would like to save what juice is left in it and try to recover a few files before it dies. Most of the important data has been backed up but I would like to try and get a few game save files if I can. But its not a disaster if the drive data is not recoverable.

View 3 Replies View Related

Computer Can't See 2TB Hard-drive In Bios But Can Still Use It In My Computer

Jan 6, 2013

So What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.

View 1 Replies View Related

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

How To Kick-start Windows 7 Into Recognising Its Full Capacity

Aug 3, 2011

I have a 4gb memory stick that I have used many times to install Linux etc on old laptops etc. Now that I want to use that stick to copy off some files from Win 7, I notice that Win 7 suggests its capacity is only 1gb.I think I have seen this kind of thing happen before but cant remember how I resolved it.Anyone got ideas on how to kick-start Windows 7 into recognising its full capacity?

View 3 Replies View Related

Dell Bios Doesn't See IDE Hard Disks But Windows 7 Does?

Dec 7, 2011

I have Windows 7 Ultimate installed on a Dell Optiplex GX620 P4 hyperthread, approx 6 years old. Bios is most current Phoenix ROM Bios Plus 1.10 A11. I have 2 sata drives and 2 IDE drives installed. Boot is from SATA 0. SATA drives 2&3 are not present. All is well with this part of the equation.I had been running a Seagate 250GB IDE drive (ST3250824A) as BIOS drive 4, master drive, jumper selected. I just installed a second 120gb Seagate IDE (ST3120026A) as a slave, BIOS drive 5. That was when things got interesting. When I rebooted BIOS took a long time to load, and then reported that neither IDE drive was present. I then did all the obvious things: Disconnected one drive at a time - BIOS would recognize the connected drive. Switched master & slave drive positions. Changed jumpering from master/slave to cable select. Installed a new ribbon cable. Checked that BIOS drive recognition was set to 'Auto' for both drives. Results are always the same: either drive is recognized when only one is connected but BIOS does not recognize them when both are installed. On boot I receive a warning that IDE Drives 4 & 5 are not present and have to press F1 to continue. When I enter Setup BIOS reports the drives as unknown drive type. When only one is connected BIOS accurately reports the drive model # & capacity.After going through all this,I decided to bring WIn 7 up and see what would happen. To my surprise, Windows 7 showed both drives and worked fine. Device Manager properly reported drive model & capacity. I have used the system in this configuration for several days and everything has worked fine.This is not a problem, per se, since other than slow booting and having to press F1 every time I boot to bypass the BIOS "error" notice the system works fine but I am curious if anyone else has had this problem, and if they found a solution. I have considered forcing a reinstall of the BIOS but since it isn't really broken I don't want to try to fix it and make things worse. I googled this problem before coming here and could not find anyone with an identical situation on any tech site. Can I be the only one who's ever had this happen?

View 3 Replies View Related

New Hard Disk Recognized By Windows 7 But Not By BIOS, Install Failed?

Aug 23, 2012

I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]

View 1 Replies View Related

Motherboard Not Recognising GPU?

May 31, 2012

Until a couple of weeks ago I was quite happily running my Nvidia 9400 GT GPU with no issues. Windows update wanted to update as it does every now an then and afterwards I get a black screen?? I switched to my on-board graphics everything is fine - I try the 9400 and nothing........ it gets weirder....... couple of days later I turn the computer on again and the 9400 is working again..... does so for a few days then black screen again I've been out today and bought a Nvidia GT 620 and plugged it into the motherboard but even that isn't showing up in device manager

View 2 Replies View Related

Laptop Is Not Recognising Screen

Apr 2, 2012

I just recently replaced my screen on my laptop. The problem is that my laptop isn't recognizing the new screen. My laptop boots up like usual but my screen is black. Whats weird is I can leave my old screen plugged in.until my laptop boots up.then plug in my new screen. which stays on then. I can surf the net as usual. but when I reboot my laptop...its back to a black screen.

View 5 Replies View Related

Keyboard Not Recognising Certain Keys?

Feb 21, 2011

I've an Acer Revo running Windows 7 as my HTPC.Everytime I type certain keys on my wired Acer keyboard it displays numbers instead of letters or it displays the wrong letter. This happens for certain keys e.g. when I press 'u' I get '4' and so on. Why is this happening? I understand you press certain function keys together it can change the keyboard settings. Is this true and how do I turn it off?I know it's not the computer as I normally used a remote connection to access the PC and typing this way works fine. I only have this problem when I use the computer directly with its wired keyboard.

View 4 Replies View Related

Not Recognising Network First Time?

Dec 8, 2011

every time i start up my pc it always comes up with "Limited or no connectivity" and comes up with my network and an "unidentified network" in the network and sharing center. I only have it connected to one network and that's my BT Homehub 2.0 router.t is connected directly through Ethernet. But when i click restart and wait for it to boot up it goes back to normal, showing one network and full internet access. As it should. just a pain to have to do this every time. In the device manager under network adapters it says "Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller"

View 10 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet? 

View 9 Replies View Related

Sabertooth 990 X Not Recognising Asus Drivers?

Jan 21, 2012

Sabertooth 990fx with amd 8120 not recognising windows 7 drivers down loaded from their site .rom files

View 1 Replies View Related

Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?

Jun 16, 2011

I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.

View 2 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Internal Hard Drive Acting Like An External Hard Drive?

Mar 4, 2010

Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?

View 6 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

Software To Transfer Files From One Hard Drive To Another Hard Drive?

Jan 21, 2013

I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.

View 1 Replies View Related

Bios Won't Recognize Partitioned Drive With The Windows Set Up On It

Aug 20, 2012

I have a Windows 7 32 Bit mini pc (SPO-Book Turo) It has 4Gigabytes of installed memory but windows will only use 3.The mini pc hasn't got a CD drive.I have put my windows installation files on my second partition of my 1000 gigabyte drive. My BIOS will not identify that the windows set up is on it what so ever.I am trying to install Windows 7 ultimate 64 bit.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved