Hard Drive Stopped Working / Cannot Get Into The BIOS?
Oct 12, 2011
I have had an expensive time with my computer recently but i am now beyond the brink and turning the tide of war to my favour.I have recently kitted my ailing PC out with a new SSD for the OS install.This is working great; i have just tonight had to plug in a brand new GFX card for my gaming pc.(My GFX card burned out due to overheating, so i have now got a new case and proper cooling)Basically, my secondary hard disk (Files Storage etc) is not working, when plugged into my sata port my computer hangs at the Windows Loading screen, also i cannot get into the BIOS.If i unplug the hard drive (Not SSD, 500GB Hitachi) my computer boots in 14 seconds, and the bios works fine.I have concluded my secondary hard disk may be broken.if i can fix it as i can barely afford to buy a new one (even knowing they are cheap).Basically if it had broken i would expect my PC would say so, seems to me that it is just waiting for a response and sitting around for hours to get it
View 4 Replies
ADVERTISEMENT
Dec 30, 2011
On my old secondary computer my setup was
Motherboard: Chaintech VNF2-350
Master 0: HDS722516VLAT80 with Windows installation
Slave 0: WD800BB-53CCB0
But then I started getting Machine Check Exceptions and my motherboard ultimately perished. So I replaced that with a Foxconn K8S755A-6ELRS. But this new motherboard won't detect the hard drive.
It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang until you unplug the cable.
If it's on the same channel as the Hitachi drive with XP on it, the BIOS recognizes the other drive, but fails to boot from it. If they are on different channels, it boots the XP drive but will see no hint of the drive on the other channel., even in Disk Management or Device Manager.
I also tried connecting it to my other computer's Intel DP35DP mobo, and it was able to detect/read/write and all that, though it does have a few bad sectors.
View 4 Replies
View Related
Apr 30, 2012
My hard drive, a WD Scorpio 200GB, is not being detected in bios. AHCI mode is enabled. When I go into the Advanced BIOS Features, all the master and slave configs are none; however, my SSD is recognized as I am on my computer right now using it. I tried every SATA Port, EVEN THE SATA PORT MY SSD IS INSTALLED ON, and it doesn't work; I tried 2 different cables and still no recognition; I tried 4 different hard drives and still no recognition, so it is not a problem with my motherboard, hard drives, or cables. What should I do? I have been trying to figure this out for 4 hours.
View 7 Replies
View Related
Jul 24, 2012
i need to completely remove all from my hard drive so that i can run my restore discs i purchased from gateway- my computer is 6 mos old and came without dics as it had restore capabilities pre installed from factory.
View 2 Replies
View Related
Jul 5, 2011
Working on my friends desktop computer and the BIOS doesn't detect the hard drive all the time. If I cold boot or reset the machine the hard drive is not detected. However if I pull the CMOS battery and power cord then drain the capacitors (by pressing the power button) and replug the power the drive is detected by the BIOS and starts booting windows (then freezes). The Computer can boot from CDs fine (from IDE cd drives). When I power up the machine without draining all of it's power/ removing the power cord the BIOS gets stuck detecting the SATA drive. I tried the Hard drive in my machine it and worked fine so I don't think its a drive/cable problem. I also tried one of my known good WD drives in the machine and it doesn't detect it. I have tried replacing the signal cable. Default settings (no options for IDE/AHCI just enable or disable SATA). I'm not sure if windows freezing is a 2nd problem or part of the first.
Motherboard: Gigabyte GA-k9ns Version F9
Drive: seagate 500gb sata (also tried a WD green 500gb & black 1TB)
View 5 Replies
View Related
Sep 28, 2012
I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
View 4 Replies
View Related
Aug 29, 2009
I just installed the RC last night and everything was going okay until I restarted my computer and my backup drive disappeared. It was accessible until I restarted, I didn't install any new drivers.
It's an IDE drive.. it doesn't show up in Disk Management either so I'm kind of stuck at what to do. Any ideas?
View 2 Replies
View Related
Dec 9, 2009
hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
View 4 Replies
View Related
Nov 16, 2012
recently had a few parts die on me so i have started to rebuild a whole new comp my motherboard is a asrock 970 extreme3 cpu is a fx 8-core black edition and gpu is a gigabyte hd7850 2g gddr5 with a seagate 1tb barricuda 7200 hdd now thats out of the way my problem is im trying to reinstall win7 but neither my bios or win 7 rrecognising my hard drive i get stuck at where it asked me where i want to install it to i try load drive but as i said
View 1 Replies
View Related
Sep 11, 2009
after reinstalling Windows 7(using USB) dvd drive does not appear in "My computer" anymore(Can't find it in Device manager it either). In addition when my notebook is booting I get DELL's warning that some drive can not be identified(and it does not state which), so I have to press Esc to skip that warning so I can successfully boot my windows 7 up.
My notebook's dvd drive don't inject any CD's/DVD's anymore. Seems like dead after reinstall.
Any ideas how to bring it back?
View 4 Replies
View Related
Aug 1, 2012
I have hp g42 laptop and all of a sudden the dvd drive stopped working. my drive was working fine two days ago.The light on the eject button is also off.I think that it may be a power problem.
View 3 Replies
View Related
Oct 11, 2012
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
View 4 Replies
View Related
Aug 27, 2011
I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies
View Related
Apr 13, 2012
Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a year after building it).
It all started with a blue screen.
KERNEL_DATA_INPAGE_ERROR
Reboot windows and it seems to start up fine, gets to the desktop and locks up.
Reboot windows and I get another blue screen.
BAD_SYSTEM_CONFIG_INFO
I try to start windows from the last good configuration. Error. Registry file failure. Cannot load hive file. I try booting from the windows cd and running a chkdsk. Hard drive starts making a buzzing sound. It gets to step 3 of 5 and stops. Failed to transfer logged messages. Status 50. Now the bios rarely even "sees" the drive. When I can get it to boot and see it, any attempt at diagnostics and repairs produces errors, locks up, or fails.
Is this a bad hard drive? I would hate to spend the money on a new one only to find it is a bad mobo or virus. How can I diagnose this? If it is a bad drive I would like to save what juice is left in it and try to recover a few files before it dies. Most of the important data has been backed up but I would like to try and get a few game save files if I can. But its not a disaster if the drive data is not recoverable.
View 3 Replies
View Related
Oct 3, 2012
If the BIOS setting for the hard drive controller is AHCI it will not recognize the drive. (This was the default setting in the BIOS), If changed to IDE mode it recognizes the drive but come up with an "No operating system detected" message. If the hard drive is installed in a second lap top it works fine. If another hard drive is installed it works fine in AHCI mode. Only the combination of the original hard drive and the original lap top wont work.
View 9 Replies
View Related
Jun 14, 2012
I have a Windows 7 Laptop which i bought in January, at the same time i bought a WD 2TB external hard drive to back up all my files onto (last laptop broke and i lost everything so decided to keep everything off the laptop itself).
View 2 Replies
View Related
Jan 29, 2013
My Seagate GoFlex 2 TB USB 3 drive has suddenly stopped working. When it happened, I was having many issues with Windows (for about 10 minutes and 3 reboots). It seems to have calmed down now but I am still having problems with USB devices. When I plug the external HD into the top USB ports (next to the wireless dongle for keybd/mouse), the keyboard stops working. In the system error logs I am getting this critical error: The driver DriverWUDFRd failed to load for the device RootSIDESHOW000. I am also noticing that I have an unknown device in my device manager. I am also having a message come up when I start the computer saying that Windows cannot connect to the Group Policy Controller. It says that it is timing out. [code]
View 2 Replies
View Related
Mar 29, 2011
I am not able to access the HP v220W 16 GB Flash Drive is not working in my Windows 7 system it says " Windows has stopped this device because it has reported problems (Code 43)"
View 6 Replies
View Related
Jun 23, 2011
So I recently dropped my laptop and as a result the hard drive isn't working properly. I'm going to buy a new hard drive and put it in, and then try to plug my old hard drive in and get the data off of it.I've got Windows Vista (Home Premium) on my laptop but I want to upgrade to Windows 7. Will I need to buy a Windows 7 upgrade or will I need the buy the entire thing? Because I don't have a Vista recovery disc (it didn't come with my laptop). Another thing is: my brother has the CDs for Windows 7 but he just doesn't have a spare licence key for me to use. What I basically want to be able to do is put Windows 7 on my laptop
View 14 Replies
View Related
Dec 27, 2009
Got a Acer laptop with Windows 7 for Christmas and previous had a computer with Windows XP. I had a external hard drive that when ever I connect to the computer it is automatically detected and will come up in My Computer. I went to connect my external drive last night and nothing as happened apart from whenever I connected the computer made a noise that something had been connected but there is nothing in My Computer.
View 7 Replies
View Related
Sep 14, 2011
I have noticed recently that when my pc is sitting idle, I will often hear the hard drive start working away for no apparrent reason. I am not really sure if this is normal or not.
Win 7 64
Asus P7P55D
i7-870
4 gig ddr3
GTX 560ti
Cooler Master 80+ 750w psu
View 4 Replies
View Related
Aug 13, 2012
I posted a separate thread about my son's laptop (hard drive problem). The hard drive (with Vista in it) is not working, and is permanently damaged (we tried to extract the data by putting the hd into an external enclosure, but while other hd's work in this enclosure, this hd does not respond at all, so it's in the trash now). My question is, if I buy a brand new hard drive and buy a fresh Windows 7 disk, would the machine take Win7? If yes, which version (upgrade, full version, etc.) of Win7 should I get? Here are the specs of the laptop:
- Toshiba Satellite A305-S6916
- 4GB RAM (DDR2, I think)
- Vista
- No hard drive at this point, it came with a 320gig hd
View 4 Replies
View Related
Sep 11, 2012
my external hard rive is not accessible. cannot format it either. i am using windows 7
View 1 Replies
View Related
Jul 9, 2012
I did an image backup to move my programs from one hard drive to another, this worked fine. But when i re-sized the partition to give myself extra room in storage, programs stopped working from the ati graphics software to google chrome,etc. also i got the message that my system is low on RAM.
View 9 Replies
View Related
Aug 12, 2012
I have been doing some searches using the search box that comes up when you press the colorful button on the bottom left. It finds nothing. I can have folders and WORD documents on my desktop, and it always comes up now with nothing found. If I create a test Folder, or WORD document, put on the Desktop, it won't find them. Always used to work fine. Only difference now is that I put in a new HD after the old one failed. Everything else seems to work fine.
View 1 Replies
View Related
Jan 8, 2013
My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies
View Related
Jul 13, 2012
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature:
Problem Event Name:APPCRASH
Application Name:Explorer.EXE
Application Version:6.1.7600.16768
Application Timestamp:4d688122
[code].....
View 1 Replies
View Related
Jan 6, 2013
So What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
View 1 Replies
View Related
Jul 22, 2012
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies
View Related
Mar 14, 2011
One day keyboards stopped functioning and it hasn't worked since. The problem is on a home built desktop computer and any and all types of keyboards. I've sat on this problem for a while since I also have a laptop and have used that for activities that require extensive typing and I can still use the onscreen keyboard to use the desktop. I wish I'd done a system restore when the problem was still fresh but I didn't think of that immediately, and it's been several months now since it started. Keyboards work fine in BIOS, but not in safe mode. All attempts at updating or reinstalling drivers have not resolved the issues. My last resort will be to reinstall Windows but I want to find an alternative fix before going there. Using Home Edition 64 bit...
View 9 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
