Hard Drive Working While PC Is Idle?
Sep 14, 2011
I have noticed recently that when my pc is sitting idle, I will often hear the hard drive start working away for no apparrent reason. I am not really sure if this is normal or not.
Win 7 64
Asus P7P55D
i7-870
4 gig ddr3
GTX 560ti
Cooler Master 80+ 750w psu
View 4 Replies
ADVERTISEMENT
Dec 26, 2011
After i lock the computer and leave for a bit, i come back to find my hard drive spinning constantly at 100 % reading and writing, but when i touch the mouse and move it it immediately goes away.I've tried disabling the Search Indexer, but that hasnt seemed to stop it. Scheduled defrag is off too. It's an Asus G73JW Laptop?
View 15 Replies
View Related
Jun 23, 2011
So I recently dropped my laptop and as a result the hard drive isn't working properly. I'm going to buy a new hard drive and put it in, and then try to plug my old hard drive in and get the data off of it.I've got Windows Vista (Home Premium) on my laptop but I want to upgrade to Windows 7. Will I need to buy a Windows 7 upgrade or will I need the buy the entire thing? Because I don't have a Vista recovery disc (it didn't come with my laptop). Another thing is: my brother has the CDs for Windows 7 but he just doesn't have a spare licence key for me to use. What I basically want to be able to do is put Windows 7 on my laptop
View 14 Replies
View Related
Dec 27, 2009
Got a Acer laptop with Windows 7 for Christmas and previous had a computer with Windows XP. I had a external hard drive that when ever I connect to the computer it is automatically detected and will come up in My Computer. I went to connect my external drive last night and nothing as happened apart from whenever I connected the computer made a noise that something had been connected but there is nothing in My Computer.
View 7 Replies
View Related
Aug 13, 2012
I posted a separate thread about my son's laptop (hard drive problem). The hard drive (with Vista in it) is not working, and is permanently damaged (we tried to extract the data by putting the hd into an external enclosure, but while other hd's work in this enclosure, this hd does not respond at all, so it's in the trash now). My question is, if I buy a brand new hard drive and buy a fresh Windows 7 disk, would the machine take Win7? If yes, which version (upgrade, full version, etc.) of Win7 should I get? Here are the specs of the laptop:
- Toshiba Satellite A305-S6916
- 4GB RAM (DDR2, I think)
- Vista
- No hard drive at this point, it came with a 320gig hd
View 4 Replies
View Related
Sep 11, 2012
my external hard rive is not accessible. cannot format it either. i am using windows 7
View 1 Replies
View Related
Oct 12, 2011
I have had an expensive time with my computer recently but i am now beyond the brink and turning the tide of war to my favour.I have recently kitted my ailing PC out with a new SSD for the OS install.This is working great; i have just tonight had to plug in a brand new GFX card for my gaming pc.(My GFX card burned out due to overheating, so i have now got a new case and proper cooling)Basically, my secondary hard disk (Files Storage etc) is not working, when plugged into my sata port my computer hangs at the Windows Loading screen, also i cannot get into the BIOS.If i unplug the hard drive (Not SSD, 500GB Hitachi) my computer boots in 14 seconds, and the bios works fine.I have concluded my secondary hard disk may be broken.if i can fix it as i can barely afford to buy a new one (even knowing they are cheap).Basically if it had broken i would expect my PC would say so, seems to me that it is just waiting for a response and sitting around for hours to get it
View 4 Replies
View Related
Jul 9, 2012
I did an image backup to move my programs from one hard drive to another, this worked fine. But when i re-sized the partition to give myself extra room in storage, programs stopped working from the ati graphics software to google chrome,etc. also i got the message that my system is low on RAM.
View 9 Replies
View Related
Aug 12, 2012
I have been doing some searches using the search box that comes up when you press the colorful button on the bottom left. It finds nothing. I can have folders and WORD documents on my desktop, and it always comes up now with nothing found. If I create a test Folder, or WORD document, put on the Desktop, it won't find them. Always used to work fine. Only difference now is that I put in a new HD after the old one failed. Everything else seems to work fine.
View 1 Replies
View Related
Jan 8, 2013
My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies
View Related
Jul 22, 2012
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies
View Related
Apr 25, 2009
I've noticed Windows XP and Windows 7 doing this.. anyone know the reason? I've got 5 hard drives plugged in. Before going to bed i'll be browsing the net, so only my C drive will be active (temp files, etc).. the other spin down.
I've noticed that when I decide to go to bed, about 5-10 minutes after having not touched the computer, at least one of my other hard-drives spin up. I have defrag scheduling disabled, I don't run any antivirus, and nothing else I have does any sort of idle work. It has to be something in Windows directly.. the question is, why does it spin up the other drives?
View 8 Replies
View Related
Feb 14, 2013
when my pc is idle (not sleep mode) a while, it start a loading sound like the one you ge loading a app/game or scanning. but i make sure i turn virus auto scan off. so why do i still get loading sound? what is making the noise?
View 3 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Sep 7, 2012
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
View 4 Replies
View Related
Sep 23, 2010
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies
View Related
Dec 13, 2011
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies
View Related
Jan 15, 2013
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
View 2 Replies
View Related
Nov 13, 2012
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies
View Related
Oct 18, 2012
Almost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
View 6 Replies
View Related
Sep 8, 2012
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
View 9 Replies
View Related
Mar 14, 2011
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies
View Related