I posted a separate thread about my son's laptop (hard drive problem). The hard drive (with Vista in it) is not working, and is permanently damaged (we tried to extract the data by putting the hd into an external enclosure, but while other hd's work in this enclosure, this hd does not respond at all, so it's in the trash now). My question is, if I buy a brand new hard drive and buy a fresh Windows 7 disk, would the machine take Win7? If yes, which version (upgrade, full version, etc.) of Win7 should I get? Here are the specs of the laptop:
- Toshiba Satellite A305-S6916
- 4GB RAM (DDR2, I think)
- Vista
- No hard drive at this point, it came with a 320gig hd
I had to pull out my HD from my Dell running W Vista and now I am trying to access those files through an adapter to my new W 7 laptop. The new laptop acknowledges the HD is there but it says I have to format the old HD I order to use it. I need to access those files but it will not even open the Old HD in my F drive.
I had to pull out my HD from my Dell running W Vista and now I am trying to access those files through an adapter to my new W 7 laptop. The new laptop acknowledges the HD is there but it says I have to format the old HD I order to use it. I need to access those files but it will not even open the Old HD in my F drive.
I have a quad core i720 intel processor and the asus p6t deluxe V2 motherboard and a basic 512 video card. I installed Vista 64 bit first - took about 50 minutes. Then installed Windows 7 RC1 on a second hard drive (dual boot) and it installed in 20 minutes.
It couldnt find the divers for chipset but shortly after it said I didnt have them installed (they werent available on the mb setup disk nor on Asus website) and it asked if I wanted them installed and windows installed the drivers. Much more intuitive.
Also I looked at the processes running on initial startup - I had perhaps 8 on windows 7 and perhaps 25-30 on vista. That alone made me a believer.
Now it wont run all of the software i would like to run (some antivirus and antispyware - spydoctor - zonealarm etc) but that was the same thing initially for vista. Oh superatispyware ran from the get go on vista and does on windows 7. I cant figure out why other antispyware and antivirus companies hem themselves and make a product that is so OS version specific.
Overall I am impressed with windows 7 - far less processes running in the background.
The beta of win 7 crashed when I tried to join my domain. Had to reinstall then I left well enough alone. The RC1 joined domain without a hitch. Less trouble than either XP or Vista.
Runs my business programs just fine. been testing those for a month.
Also pleased with the try before you buy concept. I can use the win 7 setup thhrough may 31 2010.
Would like to see the price of the OS come down a bit. Close to $300 is a little steep to convert more of my machines to win 7. I am running a laptop with vista, 2 desktops with vista. and three desktops with XP.
I have just pre-ordered Windows 7 Home Premium and I wondered if this scenario is possible:
I am currently running Windows Vista Home Premium on a single 500GB SATA hard drive.
I am planning to order a new 1TB drive to copy all of the 500GB data/files/programs onto, and then format and use the 500GB drive to install Windows 7 onto.
I am also planning to use a clone program such as Acronis True Image or Norton Ghost to complete this operation, but what I wanted to know is:
Will the newly copied programs on the 1TB drive still work and be recognised by Windows 7 after I have installed it on the 500GB drive?
And also: When cloning, is it possible to exclude the Vista OS files from being copied to the new drive (as I would not need/want Vista once I am on 7).
My external was always hooked up to my laptop which is running vista but when I try and view the files on my desktop (running 7) it cannot look into the hard drive and see the files. I was curious if I just bit the bullet and formatted the hard drive on windows seven would it still be compatible with my vista laptop.
I currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
So I recently dropped my laptop and as a result the hard drive isn't working properly. I'm going to buy a new hard drive and put it in, and then try to plug my old hard drive in and get the data off of it.I've got Windows Vista (Home Premium) on my laptop but I want to upgrade to Windows 7. Will I need to buy a Windows 7 upgrade or will I need the buy the entire thing? Because I don't have a Vista recovery disc (it didn't come with my laptop). Another thing is: my brother has the CDs for Windows 7 but he just doesn't have a spare licence key for me to use. What I basically want to be able to do is put Windows 7 on my laptop
Got a Acer laptop with Windows 7 for Christmas and previous had a computer with Windows XP. I had a external hard drive that when ever I connect to the computer it is automatically detected and will come up in My Computer. I went to connect my external drive last night and nothing as happened apart from whenever I connected the computer made a noise that something had been connected but there is nothing in My Computer.
I have noticed recently that when my pc is sitting idle, I will often hear the hard drive start working away for no apparrent reason. I am not really sure if this is normal or not.
I have had an expensive time with my computer recently but i am now beyond the brink and turning the tide of war to my favour.I have recently kitted my ailing PC out with a new SSD for the OS install.This is working great; i have just tonight had to plug in a brand new GFX card for my gaming pc.(My GFX card burned out due to overheating, so i have now got a new case and proper cooling)Basically, my secondary hard disk (Files Storage etc) is not working, when plugged into my sata port my computer hangs at the Windows Loading screen, also i cannot get into the BIOS.If i unplug the hard drive (Not SSD, 500GB Hitachi) my computer boots in 14 seconds, and the bios works fine.I have concluded my secondary hard disk may be broken.if i can fix it as i can barely afford to buy a new one (even knowing they are cheap).Basically if it had broken i would expect my PC would say so, seems to me that it is just waiting for a response and sitting around for hours to get it
I did an image backup to move my programs from one hard drive to another, this worked fine. But when i re-sized the partition to give myself extra room in storage, programs stopped working from the ati graphics software to google chrome,etc. also i got the message that my system is low on RAM.
I have been doing some searches using the search box that comes up when you press the colorful button on the bottom left. It finds nothing. I can have folders and WORD documents on my desktop, and it always comes up now with nothing found. If I create a test Folder, or WORD document, put on the Desktop, it won't find them. Always used to work fine. Only difference now is that I put in a new HD after the old one failed. Everything else seems to work fine.
My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
I've tried upgrading my Vista PC twice. The installation looks like it's going along fine and after about an hour it seems like it finishes the "installing devices" part and when it restarts and comes back up it says that the installation failed and the previous OS will be restored. Anybody else having this problem?
AMD Phenom 8650
4GBs GSkill PC 8500 RAM
ASUS M3N78 Pro MB
XFX 8800GT video card
Vista Business with SP2 build 6002
I even disconnected the printer because it said the drivers wouldn't work.
I picked up a used computer that has vista. I have an extra hard drive with windows 7 on it. Is there something I need to do other than swapping out the hard drives? Replacing the vista hard drive with the windows 7 hard drive. When I did this, the pc will automatically run system repair. I get patch prevented the system from starting Windows 7 will not start on the pc, so is there something else I must do?
I have vista installed on a seperate 500gb hard drive. I keep all my media stored on 4tb of other harddrives separately. they are setup as dynamic disks spanned together. Once I upgrade will those drives still work properly and will I loose any data?
the vista and win7 both has retail version,n it is 30days trial...for which lots of cracks n activators are available.i just want to know,i am trying dual boot,having win7 on C n vista on D partition,n both are activated by crack...but problem is,as long win7 is only OS,its activated but as long i install vista on D n apply crack,vista gets cracked but win7 on C again reverts to 30day trial.as i felt,this might be cause of installing win7 on C n vista on D,i mean oldest OS must be 1st,i dun know i m saying right or wrong.
