I had to pull out my HD from my Dell running W Vista and now I am trying to access those files through an adapter to my new W 7 laptop. The new laptop acknowledges the HD is there but it says I have to format the old HD I order to use it. I need to access those files but it will not even open the Old HD in my F drive.
View 2 RepliesI had to pull out my HD from my Dell running W Vista and now I am trying to access those files through an adapter to my new W 7 laptop. The new laptop acknowledges the HD is there but it says I have to format the old HD I order to use it. I need to access those files but it will not even open the Old HD in my F drive.
View 1 Replies View RelatedI currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
View 9 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies View RelatedI have a quad core i720 intel processor and the asus p6t deluxe V2 motherboard and a basic 512 video card. I installed Vista 64 bit first - took about 50 minutes. Then installed Windows 7 RC1 on a second hard drive (dual boot) and it installed in 20 minutes.
It couldnt find the divers for chipset but shortly after it said I didnt have them installed (they werent available on the mb setup disk nor on Asus website) and it asked if I wanted them installed and windows installed the drivers. Much more intuitive.
Also I looked at the processes running on initial startup - I had perhaps 8 on windows 7 and perhaps 25-30 on vista. That alone made me a believer.
Now it wont run all of the software i would like to run (some antivirus and antispyware - spydoctor - zonealarm etc) but that was the same thing initially for vista. Oh superatispyware ran from the get go on vista and does on windows 7. I cant figure out why other antispyware and antivirus companies hem themselves and make a product that is so OS version specific.
Overall I am impressed with windows 7 - far less processes running in the background.
The beta of win 7 crashed when I tried to join my domain. Had to reinstall then I left well enough alone. The RC1 joined domain without a hitch. Less trouble than either XP or Vista.
Runs my business programs just fine. been testing those for a month.
Also pleased with the try before you buy concept. I can use the win 7 setup thhrough may 31 2010.
Would like to see the price of the OS come down a bit. Close to $300 is a little steep to convert more of my machines to win 7. I am running a laptop with vista, 2 desktops with vista. and three desktops with XP.
I have just pre-ordered Windows 7 Home Premium and I wondered if this scenario is possible:
I am currently running Windows Vista Home Premium on a single 500GB SATA hard drive.
I am planning to order a new 1TB drive to copy all of the 500GB data/files/programs onto, and then format and use the 500GB drive to install Windows 7 onto.
I am also planning to use a clone program such as Acronis True Image or Norton Ghost to complete this operation, but what I wanted to know is:
Will the newly copied programs on the 1TB drive still work and be recognised by Windows 7 after I have installed it on the 500GB drive?
And also: When cloning, is it possible to exclude the Vista OS files from being copied to the new drive (as I would not need/want Vista once I am on 7).
I posted a separate thread about my son's laptop (hard drive problem). The hard drive (with Vista in it) is not working, and is permanently damaged (we tried to extract the data by putting the hd into an external enclosure, but while other hd's work in this enclosure, this hd does not respond at all, so it's in the trash now). My question is, if I buy a brand new hard drive and buy a fresh Windows 7 disk, would the machine take Win7? If yes, which version (upgrade, full version, etc.) of Win7 should I get? Here are the specs of the laptop:
- Toshiba Satellite A305-S6916
- 4GB RAM (DDR2, I think)
- Vista
- No hard drive at this point, it came with a 320gig hd
My external was always hooked up to my laptop which is running vista but when I try and view the files on my desktop (running 7) it cannot look into the hard drive and see the files. I was curious if I just bit the bullet and formatted the hard drive on windows seven would it still be compatible with my vista laptop.
View 6 Replies View RelatedHow can I migrate files and settings from a failed vista laptop's hard drive to a new windows 7 laptop?
View 2 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI picked up a used computer that has vista. I have an extra hard drive with windows 7 on it. Is there something I need to do other than swapping out the hard drives? Replacing the vista hard drive with the windows 7 hard drive. When I did this, the pc will automatically run system repair. I get patch prevented the system from starting Windows 7 will not start on the pc, so is there something else I must do?
View 1 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have vista installed on a seperate 500gb hard drive. I keep all my media stored on 4tb of other harddrives separately. they are setup as dynamic disks spanned together. Once I upgrade will those drives still work properly and will I loose any data?
View 1 Replies View Relatedi have old windows vista trying to recover items on it to new windws 7.
View 2 Replies View Relatedi used an ssd drive 64gb torqx for months until my computer burned out now when i try to install on any laptop or desktop windows didnt see it on install it always can up in bios and is set correctly when i used dban to format it shows up in install but windows say cant install on it it let my format it now in any windows install but wont work to install it comes up with a yellow triangle on bottom and say windows cant be installed on this drive?
View 2 Replies View RelatedI want to put my old hard drive that has files and was used with windows vista and put it into a new windows 7 laptop. Is there any overlap or any config problems I can run into doing this? Or do I just put it in and the old files should work and all i have to do is update some drivers from vista to 7?
View 2 Replies View RelatedI'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
View 9 Replies View RelatedI have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedRecently i bought a windows7 Ultimate, and i want to install it on my laptop. , my laptop working with vista.My hard disk drive has two partitions. one is OS(C: ) and another is called Recovery(D: ).my question is: How can i remove Recovery driver (which is related to vista) and install a completely new Windows 7 on my laptop?
View 4 Replies View RelatedI just purchased Windows 7 Home Premium to upgrade it from Windows Vista Home Premium, and when I popped in the disc, it does not show up! I tried a different disk, and yes it worked. I also tried putting the Windows 7 disk into my friends computer, and it showed up. I have tried many different things, and nothing works. I've tried re installing the driver, updating it, and several different fixing programs.
View 9 Replies View RelatedI recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
I have 2 harddrives. 1 has vista installed on it and the other has Windows 7 installed. when I'm using vist I can see the hard drive that has Windows 7, but when I'm using Windows 7 I can't see the hard drive that has vista on it,
How can I make it so that I can see the drive that has vista on it?