After i lock the computer and leave for a bit, i come back to find my hard drive spinning constantly at 100 % reading and writing, but when i touch the mouse and move it it immediately goes away.I've tried disabling the Search Indexer, but that hasnt seemed to stop it. Scheduled defrag is off too. It's an Asus G73JW Laptop?
View 15 RepliesMy HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies View RelatedI have a Dell Inspiron laptop. I was running Vista and about 2 weeks ago I decided to upgrade to Windows 7. After the upgrade, things worked beautifully, but a few days ago my hard drive began running constantly and still is. Whether I leave it alone or am working on it does not seem to matter, yet system performance seems unaffected by it.
I am a novice computer user so straight forward instructions or explanations are more than welcome.
I have noticed recently that when my pc is sitting idle, I will often hear the hard drive start working away for no apparrent reason. I am not really sure if this is normal or not.
Win 7 64
Asus P7P55D
i7-870
4 gig ddr3
GTX 560ti
Cooler Master 80+ 750w psu
I upgraded my HP Pavilion a1540n Desktop to Windows 7 a week ago. Ever since, my hard drive light constantly blinks. After looking at the disk activity in the Windows Resource Monitor and doing some research I am leaning towards the page file as the problem. I am not sure if that is in fact the problem as there seems to be quite a few processes creating high disk activity, including Firefox profile cache, $Logfile, and MpWppTracing.bin. I only have 1GB of RAM. Would I be better served to add RAM before doing anything else like using Cacheman?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedHow can the contents of a hard drive from an old computer be transferred to new computer when hard drive is out of the old computer?
View 3 Replies View RelatedSo What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
View 1 Replies View RelatedI've noticed Windows XP and Windows 7 doing this.. anyone know the reason? I've got 5 hard drives plugged in. Before going to bed i'll be browsing the net, so only my C drive will be active (temp files, etc).. the other spin down.
I've noticed that when I decide to go to bed, about 5-10 minutes after having not touched the computer, at least one of my other hard-drives spin up. I have defrag scheduling disabled, I don't run any antivirus, and nothing else I have does any sort of idle work. It has to be something in Windows directly.. the question is, why does it spin up the other drives?
when my pc is idle (not sleep mode) a while, it start a loading sound like the one you ge loading a app/game or scanning. but i make sure i turn virus auto scan off. so why do i still get loading sound? what is making the noise?
View 3 Replies View Relatedcan i add c drive from an HP windows xp to a asus windows 7?
View 1 Replies View Related*I have a new windows 7 (professional 64) machine.
*I removed my two hard drives from my old computer (windows xp).
*I installed them in my new computer as drive F and G
*I want to be able to use my programs and access all my data on my old drives, in my new computer
*I want to be able to access my old outlook data, including email from my old drives
*I see a bunch of folders in my F and G drives, but can't seem to use any of the program files and I don't even see "my documents" from my old computer or any outlook files...maybe I am lookign in wrong place.
How to use 2 hard drive in one computer
View 4 Replies View RelatedMy computer is running realllllly slow, and I'm not sure why.There's a lot of extra space on the computer, and Hardly anything running in the back ground. I just put a new hard drive in the computer, as it has done this previously, It slowed to a point where it would freeze and no longer work, until one day I turned it on, went to log in and it automatically restarted, so I discovered that the hard drive had crashed, I put a new one in it and it was fine, until about 2 weeks ago, when it started slowing down majorly.
View 6 Replies View RelatedI'm trying to get my Computer to sleep but it won't because of the Western Digital 1TB external hard drive that is connected to my network. The backup program is causing this problem, if I turn it off then it will sleep. I would like to keep it turned on because it will save any changes that are made to my folders and files. I would use the back program that comes with Windows 7, but that doesn't work. I get "Access is denied" Error code: 0x80070005. I think the problem may be from being connected to a network.
View 5 Replies View RelatedI'm fully formatting a second hard drive in my computer and it's a 3tb drive so it's going to take a while. I was wondering if I could watch videos I have on my other drive or if that would cause the process to run less efficiently or even skip sectors it was supposed to check.
View 9 Replies View RelatedI just bought a new computer, i7 860 and have put 7 x64 on it.
my motherboard is ausus p7p55d and has one ide socket on the board.
I was using this socket for my cd and dvd drives but I have detached them so I can plug in my old IDE hard drive.
I was using the IDE drive just 2 days ago in my old system.
Sometimes when I boot up the drive is seen and sometimes not.
when the drive is seen I try and copy some files over to my new sata drive I have in the new system. some of the files copy over but the the IDE drive always gets stuck. when I try to cancel the copy windows stops responding partially and I cant get out of the copy window and the old IDE hard drive explorer window.
So I restart windows and normally it now doesn't see the IDE drive.
What is going wrong?
How do I get my files off this hard drive?
So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".
I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.
How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?
My computer isn't picking up my other two hard drives. They appear when i turn on my computer and only sometimes with that. They don't appear to let me assign a letter or path to them either. They are both 250 gb drives and both are standard in computer but neither are accessible. If anyone has any ideas that would be great. Command line functions to check if i have drives isn't working either.
View 1 Replies View RelatedI have a laptop that is about a year old. Recently, my system rebooted and I was no longer able to view my Programs, files on the Hard drive or any other document. Here is the twist. I am still able to log into windows, use the Internet Explorere. If I happen to know the location of the file I can pull it up. It seems like i have no viewable rights to my C: drive at all. but can still work on files and programs.
View 1 Replies View RelatedI currently have Win 7 Ultimate 64-bit edition installed on my machine. (listed in my sig)
I am considering getting an x58/Core i7 920
Will i be able to just swap my hard drive from one motherboard to another or do you thing a fresh install is at hand?
In the past i have been able to swap hard drives from one gigabyte motherboard to another (both LGA 775) but i'm not sure if i will be able to do this from LGA 775 to LGA 1366.
why can't my new computer read my harddrive
View 2 Replies View RelatedI do not know anything about computers. Is 500 gb 5400 RPM hard drive good?
View 6 Replies View RelatedI'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I have a newer computer (HP Pavilion Slimline) with Windows 7 and 64bit system. My old hard drive is out of a dead (won't power up) HP Pavilion Slimline Vista 32bit. I pulled the old drive and connected it through a harness and the USB on the new computer. When I open the devices and printers program the old drive is there but when I open the icon all I get is the properties etc. but no way to access any data on the old drive. Do I need a program or is the drive dead? It powers and runs and when it is connected and I open the properties I'm told the old drive is working properly.
View 4 Replies View Relatedhow I can remove the Q hard drive that appears on my computer? it's size is 0! i have no idea how it appeared there...
View 1 Replies View RelatedI have a Windows 7 computer, and occasionally when I turn it on, it will use 100% of the hard drive for several minutes. (I have a Drives Meter sidebar gadget that shows drive activity). How can I troubleshoot this and find out its cause?
View 9 Replies View RelatedI decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
View 2 Replies View RelatedI went out a bought a Roku adapter in order to view movies from Net Fliks. Due to the result of adding this piece of hardware my E drive vanished and my computers speed dropped appreciably. I took my PC to an expert and the "missing drive" appeared but when I re-hooked it up at home my drive once again did not appear. Just a warning that if you experience a very slow pc or missing drives check for external hardware items ie Roku.
View 2 Replies View RelatedI have a Western Digital 1TB Hard Drive (External).I use it 99.9% of the time on my Windows 7 64bit computer to store pictures/videos and backup important files.It was working fine until I plugged it into a MACINTRASH to backup files from that computer.It was a simple copy and paste from the MACINTRASH to the External HDD.After copying the files from the MACINTRASH, I plugged it back into my PC.My PC no longer recognizes my external HDD. I unplugged the power, plugged it back in.Same with the USB cable. Rebooted. Then my computer wouldn't reboot and windows did its automatic self repair. Nothing.I unplugged EVERYTHING and left it that way for about 30 minutes. I plugged EVERYTHING back to my computer and turned it on.
Windows booted up fine. I plugged in the external HDD and windows had that little icon telling me it was installing drivers. I was excited to think that it finally would recognize my external HDD.Of course, it didn't work. The HDD does not show up in my computer. It does show up in Device Manager and Disk ManagementDevice MangerUnder Disk Drives it lists it only as "WD" My other drives it has a nice long name like "WD 7500AAK External USB Device" Under properties it tells me Volume information for the disk cannot be found. (The very first time I did that prior to the reboot it said there was 0MB of space on it). It claims the device is working properly Disk ManagementAt first this said that I must initialize my disk. Now it doesn't even show up anymore. I have no idea what to do anymore.
today one of my little cousins touched my computer and he clicked on hidden in the properties of the computer and now I cant find
View 3 Replies View Related