I went out a bought a Roku adapter in order to view movies from Net Fliks. Due to the result of adding this piece of hardware my E drive vanished and my computers speed dropped appreciably. I took my PC to an expert and the "missing drive" appeared but when I re-hooked it up at home my drive once again did not appear. Just a warning that if you experience a very slow pc or missing drives check for external hardware items ie Roku.
Had 135GB of 232GB freespace last night, started laptop and found there was only 71GB left. What could have caused this? Have defragmented, run anti-virus/spyware/malware and used a clean up program too which usually frees up atleast a few MB's sometimes even a couple of GB's. Have read about the system restore and windows updates but can't find a detailed step by step guide for idiots.
I just did a new build and i put my 2 storage drives from my old PC in it and installed windows on a new crucial M4 ssd.When i try to open the storage drives under my computer i sometimes get a green progress bar that takes a bit to load. I tried turning indexing off, setting folder type to general n so on and the problem still occurs. I also noticed with winamp that when i click on it and scroll down and it has to load the duration of the songs winamp becomes unresponsive for a few seconds. I use PS3 Media Server to watch my video files on my TV and it also is laggy compared to before. It takes a good 10 seconds to load the list of files and takes a while to load a file when before it was instant.
My Lenovo Z570 (1024) is running very slow even after fresh install and defrag.The drive seems very slow and the activity list seems to be going on for quite a bit. The overall speed of the machine is effected and it seems slower that my wifes Samsung R511 i5 laptop.
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
So one of my friend's laptop had been acting slow, and I took a look at it and I cleard out some applications but it was still going bad. it turns out the hard drive had to be replaced, so he sent it in under warranty. I reinstalled Norton 360 and Office for him, and helped him reinstall some of his games.Then i found out it was acting slow again, and was practically unusable for gaming!He's coming down this weekend, and I plan to take another hack at it. But I don't know what the cause would be. it's a new hard drive with a new factory image. I suspect that the new hard drive might be faulty, but I don't know how to test it. I do have some spare hard drives around that I could install, but I'd like kto know what testing processes or programs I can use to better diagnose the problem.
yesterday i was put my computer(HP Pavillion 6) into sleep mode it was working perfectly fun and i tried to wake it back up i moved the mouse and nothing happened so i did a hard shutdown i turn it back on and apparently windows 7 couldn't be loaded so i tried to do a system repair and restore to a previous point neither of those methods worked so i shut it down again and it loaded up just fine but now it takes an extreme amount of time to load up past the log in screen first the desktop is black and the toolbar shows up after a long time and then the background and programs on the desktop show up then i can use the desktop again but it takes a very long time to load up any programs and freezes alot as well what could have happened after the hard shutdown?
I have recently had to format my hard drive and re-install windows. I have also had to replace the motherboard, CPU and power supply. I borrowed a 1.5 TB Freecom firewire external hard drive from a friend to back-up important data before the format, but the transfer speed is uselessly slow now that I am attempting to put the data back on the drive.
I have tried:
- updating the drivers for the firewire card
- switching to 1394 OHCI Compliant Host Controller (legacy) in the device manager
- Optimizing the drive for 'better performance' as opposed to 'speedy removal' in the drive's properties.
As things stand at the moment, I am getting about 400 kb/ps transfer speed from the external to my on-board drive. As you can imagine, this is virtually useless to me, considering I have hundreds of gigabytes worth of data to transfer.
i just bought an external HD drive and it's very good but ... When I attach my external hard drive start up becomes painfully slow , like at least 5 times slower !. I get past the BIOS load screen fine but once the computer gets to the Starting Windows screen it sits there for a good 30-60 seconds. Then when the screen goes black (as it's going from the "starting windows" screen with the little windows 7 icon to the login screen) it again sits for anywhere from 1-2minutes, if not longer.i have an old external HD and I've been using it for 2 years and never had this problem !another thing when i click on " safely remove the HD " before i reboot and without taking the usb off the computer just stats normally !
My western digital usb 3.0 external hard drive is giving only 1 MB/Sec transfer rate. I know its really very slow. Can any one let me know what we could do increase the speed.
So What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
my c drive / partition has been eaten up by windows 7 , its 52 gb and windows is now using 25 gb. ive run winsysdir and the biggest file is the winsxs at 13.5 gb
*I have a new windows 7 (professional 64) machine.
*I removed my two hard drives from my old computer (windows xp).
*I installed them in my new computer as drive F and G
*I want to be able to use my programs and access all my data on my old drives, in my new computer
*I want to be able to access my old outlook data, including email from my old drives
*I see a bunch of folders in my F and G drives, but can't seem to use any of the program files and I don't even see "my documents" from my old computer or any outlook files...maybe I am lookign in wrong place.
My computer is running realllllly slow, and I'm not sure why.There's a lot of extra space on the computer, and Hardly anything running in the back ground. I just put a new hard drive in the computer, as it has done this previously, It slowed to a point where it would freeze and no longer work, until one day I turned it on, went to log in and it automatically restarted, so I discovered that the hard drive had crashed, I put a new one in it and it was fine, until about 2 weeks ago, when it started slowing down majorly.
I'm trying to get my Computer to sleep but it won't because of the Western Digital 1TB external hard drive that is connected to my network. The backup program is causing this problem, if I turn it off then it will sleep. I would like to keep it turned on because it will save any changes that are made to my folders and files. I would use the back program that comes with Windows 7, but that doesn't work. I get "Access is denied" Error code: 0x80070005. I think the problem may be from being connected to a network.
I'm fully formatting a second hard drive in my computer and it's a 3tb drive so it's going to take a while. I was wondering if I could watch videos I have on my other drive or if that would cause the process to run less efficiently or even skip sectors it was supposed to check.
I just bought a new computer, i7 860 and have put 7 x64 on it.
my motherboard is ausus p7p55d and has one ide socket on the board.
I was using this socket for my cd and dvd drives but I have detached them so I can plug in my old IDE hard drive.
I was using the IDE drive just 2 days ago in my old system.
Sometimes when I boot up the drive is seen and sometimes not.
when the drive is seen I try and copy some files over to my new sata drive I have in the new system. some of the files copy over but the the IDE drive always gets stuck. when I try to cancel the copy windows stops responding partially and I cant get out of the copy window and the old IDE hard drive explorer window.
So I restart windows and normally it now doesn't see the IDE drive.
So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".
I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.
How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?
My computer isn't picking up my other two hard drives. They appear when i turn on my computer and only sometimes with that. They don't appear to let me assign a letter or path to them either. They are both 250 gb drives and both are standard in computer but neither are accessible. If anyone has any ideas that would be great. Command line functions to check if i have drives isn't working either.
I have a laptop that is about a year old. Recently, my system rebooted and I was no longer able to view my Programs, files on the Hard drive or any other document. Here is the twist. I am still able to log into windows, use the Internet Explorere. If I happen to know the location of the file I can pull it up. It seems like i have no viewable rights to my C: drive at all. but can still work on files and programs.
I currently have Win 7 Ultimate 64-bit edition installed on my machine. (listed in my sig)
I am considering getting an x58/Core i7 920
Will i be able to just swap my hard drive from one motherboard to another or do you thing a fresh install is at hand?
In the past i have been able to swap hard drives from one gigabyte motherboard to another (both LGA 775) but i'm not sure if i will be able to do this from LGA 775 to LGA 1366.
I am on Windows 7, 64 bit>Microsoft Outlook 2010.Last year, I saved a number of files (word, xls, pdf) in a specfic folder. I have done this method for a number of year.In feb 2012, I checked in a file, under last years folder date, and all good.However, last week, I went to check on a couple of files, and noticed that the FOLDER icon had a padlock on it.As i have no idea how to put a padlock on. Then an IT man told me to follow the web, regarding unlocking the folder, which I did.To my horror of all horror, every file under that specific folder has disappeared in the blue.My Computer person, has checke d my desktop PC thoroughly, all avenues, including trwling through my hard drive, for the files and also in case it had 'self deleted'. Not a trace anywhere> These files are extremely important to me.How can I recover (apart from system restore) these files.Is this a WINDOWS 7 issue & how widespeard is this.??Ni viruses.
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I have a newer computer (HP Pavilion Slimline) with Windows 7 and 64bit system. My old hard drive is out of a dead (won't power up) HP Pavilion Slimline Vista 32bit. I pulled the old drive and connected it through a harness and the USB on the new computer. When I open the devices and printers program the old drive is there but when I open the icon all I get is the properties etc. but no way to access any data on the old drive. Do I need a program or is the drive dead? It powers and runs and when it is connected and I open the properties I'm told the old drive is working properly.
I have a Windows 7 computer, and occasionally when I turn it on, it will use 100% of the hard drive for several minutes. (I have a Drives Meter sidebar gadget that shows drive activity). How can I troubleshoot this and find out its cause?
