I have a Dell Inspiron laptop. I was running Vista and about 2 weeks ago I decided to upgrade to Windows 7. After the upgrade, things worked beautifully, but a few days ago my hard drive began running constantly and still is. Whether I leave it alone or am working on it does not seem to matter, yet system performance seems unaffected by it.
I am a novice computer user so straight forward instructions or explanations are more than welcome.
I upgraded my HP Pavilion a1540n Desktop to Windows 7 a week ago. Ever since, my hard drive light constantly blinks. After looking at the disk activity in the Windows Resource Monitor and doing some research I am leaning towards the page file as the problem. I am not sure if that is in fact the problem as there seems to be quite a few processes creating high disk activity, including Firefox profile cache, $Logfile, and MpWppTracing.bin. I only have 1GB of RAM. Would I be better served to add RAM before doing anything else like using Cacheman?
View 9 Replies View RelatedAfter i lock the computer and leave for a bit, i come back to find my hard drive spinning constantly at 100 % reading and writing, but when i touch the mouse and move it it immediately goes away.I've tried disabling the Search Indexer, but that hasnt seemed to stop it. Scheduled defrag is off too. It's an Asus G73JW Laptop?
View 15 Replies View RelatedI have a SSD as my boot drive, but it is suddenly running out of space. I tried cleaning, disk defragment, disk cleanup, and check my computer for viruses and malware, but there were none. I turned on the feature of seeing every fine on the computer, and when i go into the C: drive and add up how much files i have, the total i get is 42 gig out of 51 gigs. But when i open "my computer", it says i only have 2 gigs of empty space out of 51 gigs.
View 14 Replies View RelatedMy hard drive is constable running even if I'm away from it. I don't have any P2P programs install or anything that causes the PC to download. Here's my HiJackThis log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:45:35 AM, on 5/9/2011
Platform: Unknown Windows (WinNT 6.01.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16766)
Boot mode: Normal
Running processes:
C:Program Files (x86)ReviversoftRegistry ReviverRegistryReviver.exe
C:Program Files (x86)AdobeAcrobat 9.0Acrobatacrotray.exe
C:Program Files (x86)Common FilesAdobeARM1.0AdobeARM.exe
C:Program Files (x86)SABnzbdSABnzbd.exe
C:Program Files (x86)iTunesiTunesHelper.exe
C:Program Files (x86)Common FilesJavaJava Updatejusched.exe .....
I am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.
View 9 Replies View RelatedMy girlfriend's Dell Mini 9 netbook decided to start acting up recently. She turned it on, and it decided to run startup repair. The repair always fails for no apparent reason, and the computer shuts itself down. I tried running a startup repair from a Windows 7 repair disc. The repair from the disc claimed that it fixed issues, and yet when I started the computer up again it ran startup repair again. Its stuck in a cycle I cannot get past. I tried running system restore from the repair disc, but it always fails as soon as its finalized. asically, what the heck is wrong? I unfortunately have little software experience, the majority of what I know is hardware related.
I just ran startup repair from the disc again and read the error details. It says that the root cause is "startup repair has tried several times but still cannot determine the cause of the problem." It still says the errors were fixed. But after yet another boot-up, the repair still automatically runs and fails.etails of the failure:Startup repair cannot repair this computer automatically.[CODE]
Fo the last few days, Internet explorer stops working all of the time. When this happens, no desktop icons work. Sometimes, I can use task manager to shut down instances of iexplore.exe*32 and it works again for a while. Sometimes, I am not allowed to close the instances with task manager as it says operationdenied.Malwarebytes returns 0 issues. I tried MS safety scanner and that also found nothing.I assume there is a virus or trojan at work here but I really don't know what else to do
View 6 Replies View RelatedYesterday I installed RC1 of Windows 7 on my HP 6910p. After install I immediately noticed that the notebook makes much more fan noise then under Windows XP.
The fan seems to be running constantly and whenever I seem to do something a bit graphical it goes at full speed.
Are there any other (HP 6910p) users that have the same experience?
Is there something I can do / tweak to make my notebook quite again.
I have already disabled the superfetch however this only reduces the HDD activity.
I have two computers, one computer runs smoothly at a cpu level of around 10%, and has less RAM, hard drive space, and runs more cpu related tasks, it has a duel core 2.4, my other computer, however, runs at 100% all the time, no matter how many processes I kill in tskmgr.exe, it runs incredibly slow, it has a duel core 2.2. I've ran malwarebytes, CCleaner, registry cleaner, defrag, and it still runs at 100%, it didn't used to do this, it's happened for at least two months, but it keeps getting worse.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3838 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 232273 MB, Free - 71833 MB; D: Total - 232275 MB, Free - 58090 MB;
Motherboard: Packard Bell, SJV50TR
Antivirus: Norton Internet Security, Disabled
What I need to do to get my CPU running healthily. The highest process (CPU) Is Hamachi with 20%.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI recently purchased a OCZ Diesel 8GB USB drive and i plugged it into my computer and at first everything was fine then I tried to transfer some files onto it and kept hearing the "dadum...Dadum" as the drive kept connecting and disconnecting and now when I plug it in it wont stop doing that. Any suggestions on how I can stop this from happening or do I need to return the drive?I tried different usb ports on the front and back of my case and I put in my old USB and it worked fine. I also tried it on another computer and when installing the drivers it got hung up on "searching pre configured driver folders" and the same thing happened.
View 9 Replies View RelatedThe Offender DVD/CD Drive: MATSHITA DVD-RAM UJ8A2ASW
Computer:
Asus u56e laptop, windows 7 64bit.
Whenever I open up itunes, or I open up winamp, or I open up any AUDIO/DISC related program, my CD drive makes a clunking noise, and checks to see if a disc is in there. The little CD symbol next to my mouse shows up, and then it stops.This happens EVERY time i open winamp, and every time i open itunes.Whats worse about itunes, is it checks the CD drive every 3-4 minutes while itunes is open. Its VERY annoying because when it does this, it freezes iTunes for a second or two.
It also does the disc-check, every time I wake up from sleep mode.Ive had to stop using itunes complletely because of this.oh yea, and my DISC DRIVE IS EMPTY. There is NO disc in the drive ANY time this happens.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedOk so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI want to run chkdsk /r to check hard drive C but there are 2 hard drives D being the second one, which is intended for backing up. How do I know which hard drive I am check since there are 2.It was suggested to run chdsk /r from Tools but I cannot find it. Can anyone tell me where it is and how to use it?
View 14 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
A week ago my hard disk has begin to always running. First I've formatted and for two days always is ok. But now hd has begin to run again. I have stopped windows search service and it's seem to go well. Is there a solution that not involved stopping windows search service? My PC seems slow and sometimes I have to reset. I've checked for virus and there are no weird process in background. I think that perhaps is ccleaner with ccenhancer: perhaps it have cleaned some cache and pc is now rebuilding this cache.
View 5 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedCan I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related