Fan Constantly Running At Full Speed HP 6910p
Aug 5, 2009
Yesterday I installed RC1 of Windows 7 on my HP 6910p. After install I immediately noticed that the notebook makes much more fan noise then under Windows XP.
The fan seems to be running constantly and whenever I seem to do something a bit graphical it goes at full speed.
Are there any other (HP 6910p) users that have the same experience?
Is there something I can do / tweak to make my notebook quite again.
I have already disabled the superfetch however this only reduces the HDD activity.
View 4 Replies
ADVERTISEMENT
Sep 27, 2011
'm a 3D artist, and I'm currently rendering out a whole load of frames. I'm using a reasonable, Sony Vaio laptop for the task, which has an Intel i7-720QM, however I'd like to know what CPU speed it's currently operating at.I know that it says it runs at 1.6Ghz as standard but then can ramp up to 2.8Ghz, I just wondered if it truly was going at that speed whilst it's rendering.
View 9 Replies
View Related
Jun 20, 2011
It is running at 1300MHz constantly and it is suppose to run at 1600MHz, any reason why? Specs at bottom.
View 5 Replies
View Related
Feb 13, 2010
I've recently bought a new computer which I had quite some trouble with. First of all the games that keep crashing (think it's a windows 7 issue so I'm just going to wait for the MS solution). Secondly I have (and this is the issue) my network that isn't able to run at maximum speed.
At the moment my Internet only works when I put network speed to 10mbps Half Duplex instead of 100mpbs Full Duplex. This means I only have a max speed on my network of 1mb per second and the same applies for the Internet. This computer is linked to a network of 3 other computers (who don't have a single problem) and is directly attached to a switch and then to a modem.
We tried many things to get it to work again, there was only one thing that actually worked. The thing that worked was attaching my computer directly to the modem. The problem is however that that means that all the other people don't have Internet.
My question is, is it the switch that causes this problems (it's updated with the latest firmware and was the newest version 1.5 years ago)? Or is it my computer that causes it for some reason (windows 7)?
I've updated every single driver, windows, updated bios etc. etc. I run windows 7 ultimate 64bits. ps. If you need more information, I'll be happy to give it to you. (thought I'd keep it as short as possible for now)
View 7 Replies
View Related
Jan 31, 2011
Hey guys. I got 10MB internet speed. So Im suppose to download on a average speed of 1.2MBPS.
View 9 Replies
View Related
Nov 17, 2009
I have a Dell Inspiron laptop. I was running Vista and about 2 weeks ago I decided to upgrade to Windows 7. After the upgrade, things worked beautifully, but a few days ago my hard drive began running constantly and still is. Whether I leave it alone or am working on it does not seem to matter, yet system performance seems unaffected by it.
I am a novice computer user so straight forward instructions or explanations are more than welcome.
View 9 Replies
View Related
Jan 12, 2012
My girlfriend's Dell Mini 9 netbook decided to start acting up recently. She turned it on, and it decided to run startup repair. The repair always fails for no apparent reason, and the computer shuts itself down. I tried running a startup repair from a Windows 7 repair disc. The repair from the disc claimed that it fixed issues, and yet when I started the computer up again it ran startup repair again. Its stuck in a cycle I cannot get past. I tried running system restore from the repair disc, but it always fails as soon as its finalized. asically, what the heck is wrong? I unfortunately have little software experience, the majority of what I know is hardware related.
I just ran startup repair from the disc again and read the error details. It says that the root cause is "startup repair has tried several times but still cannot determine the cause of the problem." It still says the errors were fixed. But after yet another boot-up, the repair still automatically runs and fails.etails of the failure:Startup repair cannot repair this computer automatically.[CODE]
View 6 Replies
View Related
May 27, 2012
I cant play the game in full screen it shows only in windowed mode. I cant put mouse cursor as well in window. I tried changing the resolution of the game but it doesn't change if I set it to low resolution, I cant see anything but can hear the sound.
View 1 Replies
View Related
Dec 27, 2012
I have 135Mbps link speed support ADSL WI-FI router. I have enabled 802.11b+g+n wireless mode and use 20+40 MHz on my router. I use "WAP-PSK" authentication. In addition to that, have a 2.4 & 5 GHz frequency support router and client device.
But my network connection display (WLAN) I have a 54Mbps link speed, why is that? How do I use 135Mbps or at least 100Mbps link speed? Is it a some configuration issue? My Ethernet connection show full speed (100Mbps). (I'm not talking about my internet connection speed).
View 5 Replies
View Related
Feb 11, 2013
Adapter 1: Intel Built-in Lan
Adapter 2: Pci Card
I used to access shared internet from a router, now the router has no internet we only use it for local home sharing. I added the secondary adapter to connect to the DSL-modem directly.so now when I disable the 1st adapter my internet works fine. when they're both enabled internet doesn't work at full speed or sometimes not at all.
View 1 Replies
View Related
Nov 17, 2012
Fo the last few days, Internet explorer stops working all of the time. When this happens, no desktop icons work. Sometimes, I can use task manager to shut down instances of iexplore.exe*32 and it works again for a while. Sometimes, I am not allowed to close the instances with task manager as it says operationdenied.Malwarebytes returns 0 issues. I tried MS safety scanner and that also found nothing.I assume there is a virus or trojan at work here but I really don't know what else to do
View 6 Replies
View Related
Apr 14, 2012
I have a program that measures bandwidth and its reporting that I am downloading at full speed (1.2 mb/s ) all the time, and I think its accurate as my internet feels really slow. I double checked I wasn't downloading anything, and that all of the updates were on idle, but there is still traffic. What should I do? Also, I noticed a ridiculous drop from 250 GB to 217 GB of free space. The free space drop is gone, its showing 250 GB but the bandwidth is still a problem
View 1 Replies
View Related
Jun 13, 2012
So I built a new computer yesterday and when I ran a speed test today I was only getting 9.5mbps when I usually get over 30mbps. It has something to do with this computer since my other computer is getting 30mbps. And yes this computer is connected directly through and ethernet cable.
View 2 Replies
View Related
May 27, 2012
I have two computers, one computer runs smoothly at a cpu level of around 10%, and has less RAM, hard drive space, and runs more cpu related tasks, it has a duel core 2.4, my other computer, however, runs at 100% all the time, no matter how many processes I kill in tskmgr.exe, it runs incredibly slow, it has a duel core 2.2. I've ran malwarebytes, CCleaner, registry cleaner, defrag, and it still runs at 100%, it didn't used to do this, it's happened for at least two months, but it keeps getting worse.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3838 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 232273 MB, Free - 71833 MB; D: Total - 232275 MB, Free - 58090 MB;
Motherboard: Packard Bell, SJV50TR
Antivirus: Norton Internet Security, Disabled
What I need to do to get my CPU running healthily. The highest process (CPU) Is Hamachi with 20%.
View 11 Replies
View Related
Aug 23, 2011
When I connect my external hdd, it tells me that this device could work faster if I connect it to a Hi-Speed USB port. When I try to copy any files, transfer starts at about 70mb/s and stops after a few seconds, time left is calculating and when it starts again the speed is about 1.5mb/s. Sometimes pc doesn't find the hdd at all. I've installed the latest chipset drivers but nothing new happened.
View 2 Replies
View Related
May 12, 2009
need help with the Mass Storage device. cannot seem to get any of the drivers from HP to work. Also have a unknown device. Went down the entire list. Only those two things would not install.
View 3 Replies
View Related
Aug 16, 2011
My desktop appears to be running on speed!I switched it on, and that startup screen with the four coloured windows logo, is flashing like mad. The next screen I get is the password screen. On here, the cursor is spinning like mad. When I try to enter the password, pressing the first letter fills the input box with characters. I don't know whether this is the character I have just entered, although I guess it is. If I try to delete the characters, pressing backspace deletes all characters in the input box. Pressing the first character goes through it all agaiin.I now have a desktop that I can't get into because of this. Nothing new has been added...software or hardware. Everything has functioned as normal prior to this.
View 3 Replies
View Related
Dec 31, 2011
i found this website,wonder if this works.
How to Speed Up Firefox by Running It In RAM - wikiHow, the free how-to guide
View 6 Replies
View Related
Jul 15, 2011
How can I find out what speed my cpu is working at?
View 2 Replies
View Related
Dec 1, 2012
Bought i3 3220 (ivybridge), 2x4gb ram, 120GB SSD, CM Elite case & psuSo installed everything powered up got 4 beeps shutdownReset mobo as had been used before got 3 beepsI tried unplugging everything but cpu/fan/ramTried each ram stick in each slot etc checked cpu seated properlyTried everything i could think off got 3 beeps alwaysFinally i figured mobo might need bios update to run ivybridge chip (which was already supposed to have been done in old system) so i ditched the Z68 and ordered a gigabyte Z77-DS3H, so now all components are brand spankersAssembled everything 3 short beeps, pause, 3 short beeps shutdownSame as before unplugged everything same beep comboOnly mobo cpu/cooler/ram same beep comboWent to my office robbed some ddr3 out of my i7 system swapped it and still got 3/pause/3 beeps each stick in each slot and still the sameAnd i have noticed on power up cpu fan goes full speed for a few seconds then when beeps start it runs slowly dont know if this is relevantNow im stuckthe only components i havent swapped out is the cpu & psu, but is it possible the cpu is faulty, is this a common thing ???
View 9 Replies
View Related
Jul 29, 2012
I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
View 4 Replies
View Related
Feb 9, 2013
i using mada internet connection now speed is very slow?
View 1 Replies
View Related
Mar 19, 2012
NFS is no playing in full screen. There is black space for about 1 inch on both sides of the screen vertically.
View 4 Replies
View Related
Dec 1, 2009
i am using dell studio 1737 and windows 7 x64.with latest driver obtained from dell site.cuz i could not find it on intel site.it has intel GMA 4500MHD.
anyhow my problem is,i am using doom3 and on MS compatibility site it says,that it is compatible with windows7 but it does not run in full screen,it always runs in short mode,from vertical angle it runs in full length but in horizantal,it leaves border on both left and right side,almost an inch.
i searched for it lots and found that i must check my intel vga main settings panel to allow it use full screen which i have attached with,the screenshot.it is using full screen mode,but it is not using full screen,
i installed vista on my drive D.and in it,it used full screen resolution.
View 1 Replies
View Related
Nov 4, 2011
I run win 7 sp1 on dell inspiron 1520.Wenn i open some programs or games, there are two black parts at the right and the left of the screen.I have also uptated all my drivers using widows update and also drivers genius professional.wenn i was running xp, there wasn t this problem.here are the screen shots
View 6 Replies
View Related
Dec 27, 2009
i am running windows7 ultimate x64 but my problem is,that when i run doom3,it does not come in full screen,it has 1inch border left from both left side and right side...it does never come on full screen.i even changed option to use high resolution,full screen but it didn't solve problem,then somewhere on net i read,hit alt+enter,i did this too.but still problem didn't solve.
i am using dell studio laptop 1737,and it has intel GMA 4500MHD vga,i hav downloaded the driver which is latest for it even for windows 7 (from dell...i couldn't find it on intel)
lately i installed NFS most wanted,then NFS carbon..both had same problem as doom3.they are not using full screen.but in my intel vga properties,it says that it is using full screen.i have attached the image of my vga panel.
View 2 Replies
View Related
Nov 4, 2011
Wenn i open some programs or games, there are two black parts at the right and the left of the screen.I have also uptated all my drivers using widows update and also drivers genius professional.
View 5 Replies
View Related
Jan 17, 2013
I m running Windows 7 ultimate x64 on 6 pcs. All connected with cat6 cable to Gigabit Ethernet 8 port switch. Most of the PC have Realtek 8111F, 1 x Gigabit LAN Controller on board (1 or 2 have intel pro giga)
Now question is what settings should i make so that my all pcs can use full available bandwidth/data speed ?
(lan card properties have many settings in advanced tab such as ..packet size,link speed,buffer etc.)
View 5 Replies
View Related
Aug 5, 2010
It wont run in full screen always in middle. I tried messing with game options but it doesn't work for all games, I really need this fixed. I am using Radeon HD 5470. Windows 7 intel core i5 4gb ddr3 rams.
View 14 Replies
View Related
Mar 31, 2011
I got two monitors and marked dual monitor. When I put full screen sometimes that program goes to second monitor sometimes on main monitor. I got windows 7 64bit also. When I put full screen program on second monitor the wallpaper is getting low..I will post screenshots. First one is when I run a game for example and second, normal working
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Dual Core Processor 5200B, AMD64 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 9500 GT, 512 Mb
Hard Drives: C: Total - 102822 MB, Free - 27891 MB; D: Total - 166823 MB, Free - 126027 MB; I: Total - 17500 MB, Free - 13213 MB;
Motherboard: ASUSTeK Computer INC., M2N-MX SE Plus, Rev x.xx, MF7088G00711457
Antivirus: AntiVir Desktop, Updated and Enabled
View 2 Replies
View Related
Nov 9, 2011
I've been getting a BSOD whenever I run a MSE full scan, it runs for a couple of hours and then crashes.sorry, the PassMark RAMMon wouldn't attach as an html file)
View 9 Replies
View Related
