So I built a new computer yesterday and when I ran a speed test today I was only getting 9.5mbps when I usually get over 30mbps. It has something to do with this computer since my other computer is getting 30mbps. And yes this computer is connected directly through and ethernet cable.
View 2 Repliesi built this computer on june 23rd, had zero issues. i oc'd it to 4.5ghz on the 25th, have been playing crysis 1, and nfs undercover with no issues. i've run both at the same time while running prime95, and having core temp up, averaging 53c.
[code]...
listed above is all of my components.the crash happened while i was transferring files from my slave drive to my external drive.my cousin was using the computer, watching a video on Internet.the dump file is attached to this thread, i'd analyze it myself, but i haven't the slightest clue how.the bsod error said: stop 0x00000124
So I recently put together a computer for a friend of mine. We booted it up, and everything seemed to be fine. Unfortunately, he has been having intermittent BSOD crashes, often when installing new software (though not always). We've tried reinstalling Windows 7 (64 bit) several times, and I've had him run various RAM and hard drive diagnostics, which have (so far) not indicated any issues. My suspicions are beginning to point towards the motherboard or power supply, but honestly I'm pretty inexperienced when it comes to analyzing dumps. I've attached the relevant dump files. I don't have a full list of hardware directly at my disposal, but if necessary I can have him run a dxdiag tomorrow.
View 1 Replies View RelatedI have put together a computer, new motherboard, processor, hard drive, everything. Now I'm trying to install Windows 7 from a boot DVD, but obviously have no drivers installed, so my computer doesn't communicate with my monitor. I guess I'm stuck between needing the driver installed, but needing Windows to install the driver? Do I need to install MS-DOS or something first?I have a completely blank hard drive. Trying to install Windows 7 Pro, 64-bit.
View 9 Replies View RelatedI just built a new computer and whenever I play the game CoD:mw3 my computer randomly crashes, sometimes it'll show pale blue on my screen sometimes it'll be yellow and there really is no specific timing for it either. I've already upgraded my drivers.
Computer specs:
Asus p8z68-v/gen3 (motherboard)
Intel i5 2500k quad core 4cpu 3.3ghz(cpu) EVGA 012-P3-2066-KR GeForce GTX 560 Ti (Fermi) 448 Cores FTW 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP (gpu)
8gb RAM
500gb HDD
700W PSU
I have just built a new computer and i am wondering if it is possible to use my old windows 7 OS on a hard drive on the new computer. old computer was a HP pavilion elite-141f and the new computer has AMD fx-8350 , asus GTX 660 TI and a gigabyte motherboard
View 5 Replies View RelatedI have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies View RelatedAlright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
Adapter 1: Intel Built-in Lan
Adapter 2: Pci Card
I used to access shared internet from a router, now the router has no internet we only use it for local home sharing. I added the secondary adapter to connect to the DSL-modem directly.so now when I disable the 1st adapter my internet works fine. when they're both enabled internet doesn't work at full speed or sometimes not at all.
I recently built my first PC three days ago...
Specs:
i7 bloomfield 960 processor
4x4 vengeance ram
crosair hx850 PSU
evga x58 ftw3 mobo
hd 6870 radeon graphics xfx
When I first installed windows it started to work just fine but I soon noticed that it would randomly freeze every 15-30 minutes of use, but not on a particular program or anything. I assumed it was drivers so I installed the latest drivers for my GPU and MOBO and keyboard. It seemed fine again until it started crashing again. I ran a GPU burn test and a CPU burn test it passed both. (I tried runing memtest86+ but it froze at like 12%) Then I tried fixing the registry so I downloaded ccleaner and fixed the registry problems. Freezes continued. I finally decided to re install windows so I did and the problems still continued. I am at a loss of what to do and can't think of anything else.
I have recently built myself a PC (Windows 7, i5) and it's running fine except for one problem. Every now and again, when I've been away from it, I find that it's reset itself. I don't think it's overheating as the machine has two extra case fans and the temps seem fine.How should I go about starting to investigate this as it has never reset itself while I've been there.
View 10 Replies View RelatedI just put together this computer on the 2nd and since then I've blue screened 9 times. I've done some research and all the drivers are up to date, to the best of my knowledge, and I have installed all the updates from Windows Updates? I'm not sure what to try next.I downloaded the 'SF Diag Tool' and have attached both the minidump and the system information.
View 1 Replies View RelatedI am going to build a new pc from scratch, I already have a windows 7 installation disc and an windows xp installation disc from my old pc that i bought. I am worried when I try install the windows 7 os on the new build it wont work because when i put the disc in my laptop the auto run comes up and says run setup.exe, but as far as I know that is a file that is associated with windows (and the new pc wont have an OS yet) Is that file just for upgrade purposes? because on the disc there are also many other files and folders.Does that mean I will be able to install the OS on my new system from the BIOS menu or will i have to install the old xp OS and then upgrade
View 2 Replies View Relatedwhy a newly built PC keeps getting BSOD and doing random shutoffs. I have replaced the memory and MB and have tested with and without the video card or OB video. I have also tried a different PSU to see if that would help. I am leaning towards a bad CPU or incompatible memory, but wanted to see what you folks think first. Also, the system has been reloaded twice. The first time was a new install and then I reloaded everything after I installed the new MB.
edit: forgot the system specs:
OS - Windows 7 Pro 64
MB - Gigabyte GA-Z77-D3H
CPU - Intel i7-3770
RAM - Patriot PD000256-PXQ316G1866ELQK PC3-15000 1866MHz 16GB (4x4GB) Kit
Video - AMD FirePro V4900 1GB DP/DVI HF
PSU - Rosewill Hive-650
I needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
View 3 Replies View RelatedLast night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)
When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.
I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200924
Problem Signature 05: Autofailover
Problem Signature 06: 3
Problem Signature 07: No Root Cause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.
i registered to the forum cause i am encountering a problem with my old internet's connection speed on a new computer.i have a 2mbs internet connection which has been enough for me for the past few years. problem is that since i bought a new desktop my connection is extremely slow, Internet videos lag almost instantaneously even on 360p (which didn't happen with the same connection on my old desktop). moreover, downloading from firefox or programs like origin speed seems not to go above 15 or 20 kbps while on my old desktop it reached its limit around 210kbps. as you understand this is extremely annoying, i am suspecting that the problem is hardware related. i am using a modem (the one my isp provided) and an ethernet cable to my desktop. additionally i am using windows firewall and microsoft security essentials.
View 7 Replies View RelatedThis is my first post/thread on TH.Anyways, I Just recently bought a laptop for HS, about half a month old. Everything Ran fine , Until My computer decided to not work anymore.
I did a system restore from a repair disk and fixed, the only catch, norton reinstalled. I had uninstalled norton and when I did a system restore, the program probably sent it's server a "scam" alert as the program didn't respond after, So I had to uninstall it manually, removing the files and all the registry entres. Now, week later, I notice that my computer is downloading EPICALLY slow. My speed is 11mbs, on my alternate computer, it will download a 11 mb file in less then a second, but on the laptop, 25 minutes? No way is that possible.
I did some registry scans, with wisecare 365, fixed the registry and download time has come down to 13 seconds, which is still crazy long,
'm a 3D artist, and I'm currently rendering out a whole load of frames. I'm using a reasonable, Sony Vaio laptop for the task, which has an Intel i7-720QM, however I'd like to know what CPU speed it's currently operating at.I know that it says it runs at 1.6Ghz as standard but then can ramp up to 2.8Ghz, I just wondered if it truly was going at that speed whilst it's rendering.
View 9 Replies View RelatedI've recently bought a new computer which I had quite some trouble with. First of all the games that keep crashing (think it's a windows 7 issue so I'm just going to wait for the MS solution). Secondly I have (and this is the issue) my network that isn't able to run at maximum speed.
At the moment my Internet only works when I put network speed to 10mbps Half Duplex instead of 100mpbs Full Duplex. This means I only have a max speed on my network of 1mb per second and the same applies for the Internet. This computer is linked to a network of 3 other computers (who don't have a single problem) and is directly attached to a switch and then to a modem.
We tried many things to get it to work again, there was only one thing that actually worked. The thing that worked was attaching my computer directly to the modem. The problem is however that that means that all the other people don't have Internet.
My question is, is it the switch that causes this problems (it's updated with the latest firmware and was the newest version 1.5 years ago)? Or is it my computer that causes it for some reason (windows 7)?
I've updated every single driver, windows, updated bios etc. etc. I run windows 7 ultimate 64bits. ps. If you need more information, I'll be happy to give it to you. (thought I'd keep it as short as possible for now)
It is running at 1300MHz constantly and it is suppose to run at 1600MHz, any reason why? Specs at bottom.
View 5 Replies View RelatedHey guys. I got 10MB internet speed. So Im suppose to download on a average speed of 1.2MBPS.
View 9 Replies View RelatedI cant play the game in full screen it shows only in windowed mode. I cant put mouse cursor as well in window. I tried changing the resolution of the game but it doesn't change if I set it to low resolution, I cant see anything but can hear the sound.
View 1 Replies View RelatedI have 135Mbps link speed support ADSL WI-FI router. I have enabled 802.11b+g+n wireless mode and use 20+40 MHz on my router. I use "WAP-PSK" authentication. In addition to that, have a 2.4 & 5 GHz frequency support router and client device.
But my network connection display (WLAN) I have a 54Mbps link speed, why is that? How do I use 135Mbps or at least 100Mbps link speed? Is it a some configuration issue? My Ethernet connection show full speed (100Mbps). (I'm not talking about my internet connection speed).
Yesterday I installed RC1 of Windows 7 on my HP 6910p. After install I immediately noticed that the notebook makes much more fan noise then under Windows XP.
The fan seems to be running constantly and whenever I seem to do something a bit graphical it goes at full speed.
Are there any other (HP 6910p) users that have the same experience?
Is there something I can do / tweak to make my notebook quite again.
I have already disabled the superfetch however this only reduces the HDD activity.
I have a program that measures bandwidth and its reporting that I am downloading at full speed (1.2 mb/s ) all the time, and I think its accurate as my internet feels really slow. I double checked I wasn't downloading anything, and that all of the updates were on idle, but there is still traffic. What should I do? Also, I noticed a ridiculous drop from 250 GB to 217 GB of free space. The free space drop is gone, its showing 250 GB but the bandwidth is still a problem
View 1 Replies View RelatedBought i3 3220 (ivybridge), 2x4gb ram, 120GB SSD, CM Elite case & psuSo installed everything powered up got 4 beeps shutdownReset mobo as had been used before got 3 beepsI tried unplugging everything but cpu/fan/ramTried each ram stick in each slot etc checked cpu seated properlyTried everything i could think off got 3 beeps alwaysFinally i figured mobo might need bios update to run ivybridge chip (which was already supposed to have been done in old system) so i ditched the Z68 and ordered a gigabyte Z77-DS3H, so now all components are brand spankersAssembled everything 3 short beeps, pause, 3 short beeps shutdownSame as before unplugged everything same beep comboOnly mobo cpu/cooler/ram same beep comboWent to my office robbed some ddr3 out of my i7 system swapped it and still got 3/pause/3 beeps each stick in each slot and still the sameAnd i have noticed on power up cpu fan goes full speed for a few seconds then when beeps start it runs slowly dont know if this is relevantNow im stuckthe only components i havent swapped out is the cpu & psu, but is it possible the cpu is faulty, is this a common thing ???
View 9 Replies View RelatedMy usual net speed is 115kbp/s on every pc/laptop i have in my house connected to my modem via wlan . On everyone is the same .for example I use WLan to connect to modem that is aproximatle 2 meters away from my TP-LINK TL-WN422G small antena ( on the antena case is says 54 mbps's) that speed (115kbp's) is every day from 0-24h and its kind iritanting .
View 3 Replies View RelatedHack 100 mb internet speed?
View 1 Replies View Related2 Days ago I upgraded my PC and moved from XP to Windows 7 Enterprise x64. Everything was going smooth as butter, untill it was moment to use my internet. When I try to download something I get 50-60kb/s dl speed, 100 at max, while in XP my normal dl speed was around 5mb/s. I've installed all the newest drivers for absolutely everything, changed 3 lan cards, including the integrated on my motherboard, and all do the same stuff. My internet is super slow and I get disconnected every 5 or so minutes. I'm with a broadband (PPPoE) connection. I've heard there is a possibility my motherboard is faulty, because they were some mobos wich have problems with Windows 7. My setup is this:
Asus M4N68T AM3 Motherboard wich on the box claims its "Windows 7 Ready" AMD Athlon II X2 255 3.1GHz AM3 Dual Core Processor 2x2GB A-Data DDR3 1600G Memory Kit 500GB Hitachi 7K1000.C SATA II HDD Sapphire HD 5670 512MB GDDR5 Video card The lan card that I'm using in the moment is TP Link TF-3239DL
I have a ZXDSL 531B router from ZTE. Now here's the setup for the DSL router with 4 LAN ports, which all are connected to different PCs. And this happens to be the ONLY source of internet to all of us. Here's my needs, I want to control EACH LAN port speed, as it can be shared equally & not one stealing most / all bandwidth & rest left begging . Every computer uses Windows 7.
View 3 Replies View Related