I have recently built myself a PC (Windows 7, i5) and it's running fine except for one problem. Every now and again, when I've been away from it, I find that it's reset itself. I don't think it's overheating as the machine has two extra case fans and the temps seem fine.How should I go about starting to investigate this as it has never reset itself while I've been there.
View 10 Replies
i built this computer on june 23rd, had zero issues. i oc'd it to 4.5ghz on the 25th, have been playing crysis 1, and nfs undercover with no issues. i've run both at the same time while running prime95, and having core temp up, averaging 53c.
[code]...
listed above is all of my components.the crash happened while i was transferring files from my slave drive to my external drive.my cousin was using the computer, watching a video on Internet.the dump file is attached to this thread, i'd analyze it myself, but i haven't the slightest clue how.the bsod error said: stop 0x00000124
I just put together this computer on the 2nd and since then I've blue screened 9 times. I've done some research and all the drivers are up to date, to the best of my knowledge, and I have installed all the updates from Windows Updates? I'm not sure what to try next.I downloaded the 'SF Diag Tool' and have attached both the minidump and the system information.
View 1 Replies View RelatedI am going to build a new pc from scratch, I already have a windows 7 installation disc and an windows xp installation disc from my old pc that i bought. I am worried when I try install the windows 7 os on the new build it wont work because when i put the disc in my laptop the auto run comes up and says run setup.exe, but as far as I know that is a file that is associated with windows (and the new pc wont have an OS yet) Is that file just for upgrade purposes? because on the disc there are also many other files and folders.Does that mean I will be able to install the OS on my new system from the BIOS menu or will i have to install the old xp OS and then upgrade
View 2 Replies View RelatedSo I recently put together a computer for a friend of mine. We booted it up, and everything seemed to be fine. Unfortunately, he has been having intermittent BSOD crashes, often when installing new software (though not always). We've tried reinstalling Windows 7 (64 bit) several times, and I've had him run various RAM and hard drive diagnostics, which have (so far) not indicated any issues. My suspicions are beginning to point towards the motherboard or power supply, but honestly I'm pretty inexperienced when it comes to analyzing dumps. I've attached the relevant dump files. I don't have a full list of hardware directly at my disposal, but if necessary I can have him run a dxdiag tomorrow.
View 1 Replies View Relatedwhy a newly built PC keeps getting BSOD and doing random shutoffs. I have replaced the memory and MB and have tested with and without the video card or OB video. I have also tried a different PSU to see if that would help. I am leaning towards a bad CPU or incompatible memory, but wanted to see what you folks think first. Also, the system has been reloaded twice. The first time was a new install and then I reloaded everything after I installed the new MB.
edit: forgot the system specs:
OS - Windows 7 Pro 64
MB - Gigabyte GA-Z77-D3H
CPU - Intel i7-3770
RAM - Patriot PD000256-PXQ316G1866ELQK PC3-15000 1866MHz 16GB (4x4GB) Kit
Video - AMD FirePro V4900 1GB DP/DVI HF
PSU - Rosewill Hive-650
I have put together a computer, new motherboard, processor, hard drive, everything. Now I'm trying to install Windows 7 from a boot DVD, but obviously have no drivers installed, so my computer doesn't communicate with my monitor. I guess I'm stuck between needing the driver installed, but needing Windows to install the driver? Do I need to install MS-DOS or something first?I have a completely blank hard drive. Trying to install Windows 7 Pro, 64-bit.
View 9 Replies View RelatedI needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
View 3 Replies View RelatedI just built a new computer and whenever I play the game CoD:mw3 my computer randomly crashes, sometimes it'll show pale blue on my screen sometimes it'll be yellow and there really is no specific timing for it either. I've already upgraded my drivers.
Computer specs:
Asus p8z68-v/gen3 (motherboard)
Intel i5 2500k quad core 4cpu 3.3ghz(cpu) EVGA 012-P3-2066-KR GeForce GTX 560 Ti (Fermi) 448 Cores FTW 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP (gpu)
8gb RAM
500gb HDD
700W PSU
I have just built a new computer and i am wondering if it is possible to use my old windows 7 OS on a hard drive on the new computer. old computer was a HP pavilion elite-141f and the new computer has AMD fx-8350 , asus GTX 660 TI and a gigabyte motherboard
View 5 Replies View RelatedSo I built a new computer yesterday and when I ran a speed test today I was only getting 9.5mbps when I usually get over 30mbps. It has something to do with this computer since my other computer is getting 30mbps. And yes this computer is connected directly through and ethernet cable.
View 2 Replies View RelatedI have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies View RelatedLast night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)
When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.
I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200924
Problem Signature 05: Autofailover
Problem Signature 06: 3
Problem Signature 07: No Root Cause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.
Alright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
I recently built my first PC three days ago...
Specs:
i7 bloomfield 960 processor
4x4 vengeance ram
crosair hx850 PSU
evga x58 ftw3 mobo
hd 6870 radeon graphics xfx
When I first installed windows it started to work just fine but I soon noticed that it would randomly freeze every 15-30 minutes of use, but not on a particular program or anything. I assumed it was drivers so I installed the latest drivers for my GPU and MOBO and keyboard. It seemed fine again until it started crashing again. I ran a GPU burn test and a CPU burn test it passed both. (I tried runing memtest86+ but it froze at like 12%) Then I tried fixing the registry so I downloaded ccleaner and fixed the registry problems. Freezes continued. I finally decided to re install windows so I did and the problems still continued. I am at a loss of what to do and can't think of anything else.
my computer recently has started to reset the volume to 100% and keep it at that level, it is unable to be reduced to a better level.a week ago, I installed X-Lite 4, on my computer so i was able to start setting up my voip phone.this problem started about 4 days ago and i was able at first been able to get around it by restarting my computer but then some time later time varies, it would just reset volume to full level.with this doing this it has displayed on my screen bottom middle screen, a picture fo a speaker and showing volume bar at full. this is always ontop of all other windows.the only way I have been able to get rid of this is by stopping the service "audiosrv" through task manager.I have since done a scan with spybot, cleaned my computer with c cleaner, ran my virus scanner etc.
I have also changed property changes in audio settings and nothing has made a difference.I have also uninstalled x-lite, done a system restore to about 2 weeks ago, nothing still made any difference. I am running Windows 7 ultimate 32bit, on a pentium dual core at the moment I am thinking that maybe my audiosrv.dll file or something assoicated with it may be currupt or been infected and not being picked up so far.I have to be able to fix this issue with doing a fix. without a reinstall of the OS / software.
I use the Display Color Calibration program in Windows 7 to get my monitor's gamma down. It was working great until two or three days ago, but it now resets itself on reboot, every reboot. I've had this problem before and it was related to igfxpers.exe, but that is not among my startup items and thus isn't the issue. Oddly, during the Welcome screen, the gamma goes way up, then seems to come back to where it should be, only to get really bright again and stay there. Even stranger, if I run the calibration tool, bring the gamma down and just cancel the process, the gamma comes back down to where it should be.The problem seems to have cropped up after I upgraded to the newest version of Microsoft Security Essentials, but I'm not sure that's the cause of the issue.
View 2 Replies View RelatedI have the clock set to notify me when clock changes, and it always has a note as to when a change is scheduled for savings time, but it never notifies me nor changes the time on it's own. I always have to reset it myself and that is usually after the time confuses me enough for me to check the actual time.
How do I get it to reset automatically?
I have an issue with Windows 7.
Whatever time I set Windows 7 to (i.e. Eastern Time, Western Time, Coordinated Universal Time, etc.), on restart it sets itself to GMT, while still showing that I've selected the previous time zone I set (i.e. Eastern Time).
I am in the process of completing a new build and when I try to shutdown it just reboots.
- Turned off all "wake" features in the bios
- The only front panel connections I'm using are reset and power on buttons. Neither of which are sticking on
- Motherboard is out of case so there are no dropped screws shorting anything out
Win 7 Pro installed on Crucial 128mb SSD
Gigabyte GA-Z68XP-UD3 motherbrd
I7-2700K processor
G.Skill 2x 8Gb (2x4gb) DDR3 memory
old IBM PS/2 keybrd
old Micrsft USB mouse
onboard video
Coolermaster 1000W powersupply
I have this issue resolved but I still wonder why it always resets to the wrong way.I always have to click on the set mode to "What you see is what you get".This wan't true until a few months ago.This isn't a big issue now that I know what to do (it drove my crazy for a while) but I'm curious as to whether there is a way to set the default to "What you see is what you get".
View 2 Replies View RelatedBasically, whenever I start the computer up, it gets to the Windows login screen and loads it, at first, in full resolution (2048 x 1152) but immediately changes to 1024x768. Then once logged in I have to go in and change it back to full resolution. The problem started after I disconnected my monitor and connected it to my laptop with a VGA cable. Typically it's connected to this computer via DVI. I was thinking it might be a cable issue- one of the pins got damaged or something but I don't have another DVI cable to test with.
Specs:
Lenovo D20 4155 workstation
CPU: 2.67 ghz Intel Xeon x5550
Graphics: ATI FirePro v7750
Monitor: Samsung SyncMaster 2343BWX
What I've tried:
Updating windows
Re-installing The ATI driver and all the ATI software with the current version- reinstalled it with a newer version and reinstalled it with an older version. (I'm back to the newest version now)
Re-installed the Samsung monitor drivers
Ran an AV scan- no issues found.
I dont know whats going on with my PC I think some system files are corrupt but heres my problems:My PC locks up (freezes), reboots sometimes for no reason, flashes a BSOD sometimes, and one time It rebooted gave me error "bootmrg image is corrupt. the system can not start
View 14 Replies View RelatedI used Defogger to get rid of my mount drive, then used DDS to get a log I would get a friend to look at, and then used OTL to scan my computer. I ran the "fix" on OTL and everything went back to normal (IE home page stayed as set, and the dimmer buttons on my laptop started to work). Then came a Windows Update and restart after updating.
View 7 Replies View RelatedI've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme
CPU: Intel Core i7 - 2600k
Ram: 8GB G.Skill RipjawsX
Graphics: Sapphire Radeon HD 7970 3GB
PSU: Antec High Current Pro HCP -750
SSD: Samsung 830 256GB
HD: Seagate Barracuda 2TB
Cooling: Antec Kuhler H20 920
OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
I cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
View 1 Replies View RelatedI'm at my wits end now though, After several attempts at installing Win 7 RC (64bit) I realised it wouldn't let me becasue I hadn't added the latest drivers for my motherboard. Now it appears to have installed but whenever windows starts, it reboots at the point where the first 'red dot' appears (the four colours swirl in to make the window).
I ran in safe mode and it appears to reboot whenever it gets as far as 'system32/drivers/disk.sys'
I have installed to three different HDD, both IDE and SATA. All clean before the start. I've used an IDE DVD drive and a USB external, and my BIOS is totally up to date. I've now striped the PC of everything none essential.
The latest drivers for the motherboard are the Vista 64bit variety because there are no windows 7 drivers (that I could see).
P.S. I also obtained a copy of the 90day release version of 64bit Ultimate, which a friend has successfully installed on his Vista laptop. I've tried installing this with all the same configs and same problem every time.
I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies View Relatedat seemingly random intervals, I'll "wake up" my computer only to find its date/time entry is suddenly same date, same time, but YEAR 7011.Not too surprisingly, things don't work right when the computer year is that far off-- which is usually what tips me off that it's happened yet again. AOL may not work, or I may bet alerts that computer protection is "no longer valid" (well gee, 5000 years from now, not surprised). WHAT causes these repeated changes of the computer's year setting?
View 1 Replies View RelatedWhen I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot?
View 9 Replies View RelatedI have a couple of programs who's icons I have set to always show, one of them is mailwasher for example. Everything is fine until my wife logs onto her account when I log back onto mine mailwasher becomes hidden again by. So it means I have to unhide it every time she logs on. It's not all icons that do this
View 8 Replies View Related
