Gamma Resets On Reboot?
Jul 3, 2010
I use the Display Color Calibration program in Windows 7 to get my monitor's gamma down. It was working great until two or three days ago, but it now resets itself on reboot, every reboot. I've had this problem before and it was related to igfxpers.exe, but that is not among my startup items and thus isn't the issue. Oddly, during the Welcome screen, the gamma goes way up, then seems to come back to where it should be, only to get really bright again and stay there. Even stranger, if I run the calibration tool, bring the gamma down and just cancel the process, the gamma comes back down to where it should be.The problem seems to have cropped up after I upgraded to the newest version of Microsoft Security Essentials, but I'm not sure that's the cause of the issue.
View 2 Replies
ADVERTISEMENT
Sep 13, 2009
When I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot?
View 9 Replies
View Related
Sep 29, 2011
the gamma of my laptop has suddenly and permanently grown up very bright. measures to reduce gamma, my op system is Win7
View 4 Replies
View Related
Jun 16, 2011
my computer recently has started to reset the volume to 100% and keep it at that level, it is unable to be reduced to a better level.a week ago, I installed X-Lite 4, on my computer so i was able to start setting up my voip phone.this problem started about 4 days ago and i was able at first been able to get around it by restarting my computer but then some time later time varies, it would just reset volume to full level.with this doing this it has displayed on my screen bottom middle screen, a picture fo a speaker and showing volume bar at full. this is always ontop of all other windows.the only way I have been able to get rid of this is by stopping the service "audiosrv" through task manager.I have since done a scan with spybot, cleaned my computer with c cleaner, ran my virus scanner etc.
I have also changed property changes in audio settings and nothing has made a difference.I have also uninstalled x-lite, done a system restore to about 2 weeks ago, nothing still made any difference. I am running Windows 7 ultimate 32bit, on a pentium dual core at the moment I am thinking that maybe my audiosrv.dll file or something assoicated with it may be currupt or been infected and not being picked up so far.I have to be able to fix this issue with doing a fix. without a reinstall of the OS / software.
View 3 Replies
View Related
Jan 11, 2013
I have recently built myself a PC (Windows 7, i5) and it's running fine except for one problem. Every now and again, when I've been away from it, I find that it's reset itself. I don't think it's overheating as the machine has two extra case fans and the temps seem fine.How should I go about starting to investigate this as it has never reset itself while I've been there.
View 10 Replies
View Related
Nov 7, 2011
I have the clock set to notify me when clock changes, and it always has a note as to when a change is scheduled for savings time, but it never notifies me nor changes the time on it's own. I always have to reset it myself and that is usually after the time confuses me enough for me to check the actual time.
How do I get it to reset automatically?
View 3 Replies
View Related
Jan 18, 2012
I have an issue with Windows 7.
Whatever time I set Windows 7 to (i.e. Eastern Time, Western Time, Coordinated Universal Time, etc.), on restart it sets itself to GMT, while still showing that I've selected the previous time zone I set (i.e. Eastern Time).
View 3 Replies
View Related
Apr 8, 2012
I am in the process of completing a new build and when I try to shutdown it just reboots.
- Turned off all "wake" features in the bios
- The only front panel connections I'm using are reset and power on buttons. Neither of which are sticking on
- Motherboard is out of case so there are no dropped screws shorting anything out
Win 7 Pro installed on Crucial 128mb SSD
Gigabyte GA-Z68XP-UD3 motherbrd
I7-2700K processor
G.Skill 2x 8Gb (2x4gb) DDR3 memory
old IBM PS/2 keybrd
old Micrsft USB mouse
onboard video
Coolermaster 1000W powersupply
View 3 Replies
View Related
Jul 3, 2012
I have this issue resolved but I still wonder why it always resets to the wrong way.I always have to click on the set mode to "What you see is what you get".This wan't true until a few months ago.This isn't a big issue now that I know what to do (it drove my crazy for a while) but I'm curious as to whether there is a way to set the default to "What you see is what you get".
View 2 Replies
View Related
Oct 21, 2011
Basically, whenever I start the computer up, it gets to the Windows login screen and loads it, at first, in full resolution (2048 x 1152) but immediately changes to 1024x768. Then once logged in I have to go in and change it back to full resolution. The problem started after I disconnected my monitor and connected it to my laptop with a VGA cable. Typically it's connected to this computer via DVI. I was thinking it might be a cable issue- one of the pins got damaged or something but I don't have another DVI cable to test with.
Specs:
Lenovo D20 4155 workstation
CPU: 2.67 ghz Intel Xeon x5550
Graphics: ATI FirePro v7750
Monitor: Samsung SyncMaster 2343BWX
What I've tried:
Updating windows
Re-installing The ATI driver and all the ATI software with the current version- reinstalled it with a newer version and reinstalled it with an older version. (I'm back to the newest version now)
Re-installed the Samsung monitor drivers
Ran an AV scan- no issues found.
View 3 Replies
View Related
Nov 11, 2012
I dont know whats going on with my PC I think some system files are corrupt but heres my problems:My PC locks up (freezes), reboots sometimes for no reason, flashes a BSOD sometimes, and one time It rebooted gave me error "bootmrg image is corrupt. the system can not start
View 14 Replies
View Related
Dec 17, 2012
I used Defogger to get rid of my mount drive, then used DDS to get a log I would get a friend to look at, and then used OTL to scan my computer. I ran the "fix" on OTL and everything went back to normal (IE home page stayed as set, and the dimmer buttons on my laptop started to work). Then came a Windows Update and restart after updating.
View 7 Replies
View Related
Apr 25, 2012
I've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme
CPU: Intel Core i7 - 2600k
Ram: 8GB G.Skill RipjawsX
Graphics: Sapphire Radeon HD 7970 3GB
PSU: Antec High Current Pro HCP -750
SSD: Samsung 830 256GB
HD: Seagate Barracuda 2TB
Cooling: Antec Kuhler H20 920
OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
View 8 Replies
View Related
Sep 18, 2012
I cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
View 1 Replies
View Related
Sep 22, 2009
I'm at my wits end now though, After several attempts at installing Win 7 RC (64bit) I realised it wouldn't let me becasue I hadn't added the latest drivers for my motherboard. Now it appears to have installed but whenever windows starts, it reboots at the point where the first 'red dot' appears (the four colours swirl in to make the window).
I ran in safe mode and it appears to reboot whenever it gets as far as 'system32/drivers/disk.sys'
I have installed to three different HDD, both IDE and SATA. All clean before the start. I've used an IDE DVD drive and a USB external, and my BIOS is totally up to date. I've now striped the PC of everything none essential.
The latest drivers for the motherboard are the Vista 64bit variety because there are no windows 7 drivers (that I could see).
P.S. I also obtained a copy of the 90day release version of 64bit Ultimate, which a friend has successfully installed on his Vista laptop. I've tried installing this with all the same configs and same problem every time.
View 1 Replies
View Related
Jun 9, 2012
I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies
View Related
Jun 29, 2011
at seemingly random intervals, I'll "wake up" my computer only to find its date/time entry is suddenly same date, same time, but YEAR 7011.Not too surprisingly, things don't work right when the computer year is that far off-- which is usually what tips me off that it's happened yet again. AOL may not work, or I may bet alerts that computer protection is "no longer valid" (well gee, 5000 years from now, not surprised). WHAT causes these repeated changes of the computer's year setting?
View 1 Replies
View Related
Jul 7, 2010
I have a couple of programs who's icons I have set to always show, one of them is mailwasher for example. Everything is fine until my wife logs onto her account when I log back onto mine mailwasher becomes hidden again by. So it means I have to unhide it every time she logs on. It's not all icons that do this
View 8 Replies
View Related
Nov 23, 2010
I've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies
View Related
Jul 29, 2012
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
View 4 Replies
View Related
Nov 27, 2012
Once in a while I find that the time zone moves from GMT to Pacific Time.Has anyone any idea what would cause this, new CMOS battery fitted, which ever time zone shows the time is correct for that zone. Checked the BIOS and that also changes.I dual boot two Win 7 installations.
View 5 Replies
View Related
Apr 20, 2012
My computer hard drive crashed a week ago and most of my back-ups went with the system. So, I got a new 500 GB drive and have been re-installing everything from scratch. I started with a clean install of Windows XP (service pack 2), which took forever to get all the up-dates done. Then I upgraded to Windows 7 and did the up-dates for that. I didn't make a recovery disk at this point because I wanted to get everything installed first.Unfortunately, the last time I went to reboot it failed. When I power-up the computer it stalls out on the Dell BIOS screen. I can't get into Safe Mode, Setup, or the Boot Menu because my keyboard and mouses are not working. They are both USB and none of my USB ports are working. (Also, I have not PS/2 ports on my machine.).
View 5 Replies
View Related
Oct 6, 2012
my pc shows reboot and select proper boot device or insert boot media in selected boot device and press a key how can i collect my data.
View 1 Replies
View Related
Feb 22, 2011
I just reinstalled W7Ultimate so i can do a clean install of SP1 but before i installed the sp1 i get this error when i reboot.
View 1 Replies
View Related
Oct 7, 2012
The reason I ended up there was because I was getting a problem where, at random times during random programs, the computer would lose signal to the monitor... Pause for a while, then reboot. Figuring I might have old hardware profiles that needed updating, I went to check my windows updater and found it was disabled... A short series of checks and Gringo was head to head with a Zero Acess Infection, which he promptly kicked the backside of.However, since then, the black screen issue has returned. It seems it wasn't Malware related. It doesn't seem to have any obvious pattern. Sometimes it happens when nothing it happening at all, and when I get back to the computer there is just an error log.Sometimes it happens twice in a row, sometimes not for hours. CPU and GPU seem to be at normal tempsWhen windows reboots it has the following error log: Problem signature: Problem Event Name[CODE]
View 14 Replies
View Related
Jun 1, 2009
Does anyone know of a software available that lets you reboot from Windows and choose another OS besides the auto default, in a multiboot scenario?
I need something like this because I Dameware into my other computer a lot and would like to be able to get it to boot to another OS than default, remotely.
I guess I could use EasyBCD to change the default OS when I want to reboot but hoping to do this without editing bcd.
View 4 Replies
View Related
Jun 8, 2009
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
View 2 Replies
View Related
Jun 14, 2009
I remember a functionality in Vista/XP where you could hold the SHIFT button for a warm reboot which effectively avoided having to go through BIOS POST.
I have tried this in Windows 7 however no luck.
Has this been removed? if so that suck cause i have a RAID controller which takes a long time to go through all of its tests/init.
Anyone?
View 9 Replies
View Related
Jul 19, 2009
I was running Windows XP and kept the system up for weeks on end. I just installed Windows 7 7600 last night and throughout the night the system will just restart. I saw some "power" labeled things in the event viewer mostly some wake on things with an "unknown" source but honestly it's not shedding much light on things. Is there anything I can do, change or install that will monitor why this happens?
View 7 Replies
View Related
Mar 13, 2009
I just updated Windows 7048 to 7057. It worked perfectly except
that whenever I reboot an empty notepad screen appears which is
labeled " desktop.ini - Notepad " .
I Cannot find anything in the desktop file which would cause this.
View 3 Replies
View Related
Jun 6, 2009
I got a bsod after i rebooted i didnt even make it to startup omg why! It took me to tartup repair but the attemping repairs is endless.
View 1 Replies
View Related
