Win 7 Install Resets While Loading Driver/disk.sys
Sep 22, 2009
I'm at my wits end now though, After several attempts at installing Win 7 RC (64bit) I realised it wouldn't let me becasue I hadn't added the latest drivers for my motherboard. Now it appears to have installed but whenever windows starts, it reboots at the point where the first 'red dot' appears (the four colours swirl in to make the window).
I ran in safe mode and it appears to reboot whenever it gets as far as 'system32/drivers/disk.sys'
I have installed to three different HDD, both IDE and SATA. All clean before the start. I've used an IDE DVD drive and a USB external, and my BIOS is totally up to date. I've now striped the PC of everything none essential.
The latest drivers for the motherboard are the Vista 64bit variety because there are no windows 7 drivers (that I could see).
P.S. I also obtained a copy of the 90day release version of 64bit Ultimate, which a friend has successfully installed on his Vista laptop. I've tried installing this with all the same configs and same problem every time.
View 1 Replies
ADVERTISEMENT
Apr 25, 2012
I've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme
CPU: Intel Core i7 - 2600k
Ram: 8GB G.Skill RipjawsX
Graphics: Sapphire Radeon HD 7970 3GB
PSU: Antec High Current Pro HCP -750
SSD: Samsung 830 256GB
HD: Seagate Barracuda 2TB
Cooling: Antec Kuhler H20 920
OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
View 8 Replies
View Related
May 28, 2011
I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened. Now however I cannot get it to detect any CDs. It will not load anything.Now I looked and I realized that my CD/DVD drive was not listed on my computer.
View 3 Replies
View Related
May 28, 2011
Okay, so I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened.
Now however I cannot get it to detect any CDs. It will not load anything. Now I looked and I realized that my CD/DVD drive was not listed on my computer. I am trying to figure out what driver I had, so I can try re-installing it. I run a Dell Inspiron M5010 64 bit.
View 3 Replies
View Related
May 5, 2009
I'm installing the official MS downloaded 64-bit build 7100 RC (released May 5). I'm installing onto an Athlon 64 X2, 4 GB RAM, etc. I have integrated graphics card that I'm using to get it running, before trying to get my ATI 4670 to work. The int. graphics card is an ATI X1250 chip.
When I just boot it, everything loads fine, but the Windows screen is mostly white with black lines through it. You can see where textboxes are, but not what's in them. The mouse cursor is fine throughout. So, I figured my drivers were just bad.
So, I tried to load the system via the Windows 7 boot disk, then go to the Repair Windows option. This all works fine and the screen looks normal. I open up the folder with my drivers (downloaded directly from Gigabyte today), and select my .inf file. It brings up a list of drivers to install. I click on my chip (again, the X1250), and it loads for a bit before saying the driver failed to load. So, I don't know what I'm doing wrong here other than just being SOL. Any thoughts?
View 0 Replies
View Related
Nov 30, 2010
I recently upgraded my computer and part of the plan was to use two 2Tb drives in a raid setup for my main windows drive. I see that it only recognises about half of the raid volume and the rest is unallocated space. Is this a general limit on Windows or is there a work around this?
View 4 Replies
View Related
Dec 20, 2010
I have one hard disk 150GB on my computer. I want to install Windows 7 and divide the drive into two partitions. When I did it using the instructions that I had during setup, Windows 7 load only with the system drive! Where did all the other memory gone? Can I return the lost memory without installing again Windows 7?
View 2 Replies
View Related
May 26, 2012
Disk read error ctrl+alt+dlt to restart your system.
1. Have sony vaio E-series vpcea23en
2. Fail to load windows 7
3. Even recovery dvd stop to load
4. No option in bios to run diagnostics.
5. Try to install windows 7 64bit clean install but also failed to load it.
6. Have no money for new hdd.
7. How can I format my laptop. full
View 7 Replies
View Related
Jun 6, 2012
I have a Dell XPS 430 that came with Windows Vista and a Windows 7 upgrade disk. I set up my main hard drive with Windows 7 on one partition, Linux on another partition, and a third partition for storage. I recently needed more space for Windows, and no longer needed Linux, so using the Windows 7 disk manager I deleted the Linux partition and extended the Win partition using the newly unallocated space.
Upon restarting my machine, I am no longer able to boot into windows but instead am presented with the message:
GRUB Loading, please wait...
Error 22
I have a Windows 7 disk that I am using to access the repair utility, which I have run countless times. I have tried severel of the tutorials to rebuild BCD and FixMBR, etc etc. Frankly I am getting lost in all the commands and not even sure what does what anymore!
View 1 Replies
View Related
Aug 14, 2012
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
View 9 Replies
View Related
Dec 14, 2012
I had to reinstall my OS (completely format it and wipe everything in HDD)...So after some searching i finally was able to reinstall my OS, and install most of the drivers.But after re-installing windows 7...the internet browsing speed has become extremely slow...Many webpages dont load at all...Torrents work at 100% speed...I have tried to connect to my pc manufacturers(dell) website and it takes forever to load...many common websites like malwarebytes, utorrent etc also dont load...Using different DNS servers(google, OPENDNS) didnt help much...So i thought that the problem might be with one of the drivers...In device management screen most of the drivers are installed...But for 1 driver there is an exclamation mark...I don't know what device it is..The driver name is "other devices->PCI simple communication controller".. what driver needs to be installed? i can't connect to dell website..So is there any other way i can update my driver?
View 2 Replies
View Related
Nov 13, 2009
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
View 4 Replies
View Related
Nov 13, 2009
I just bought windows 7 for my desktop. It will load past the "windows is loading files.." page. then it will load to the "starting windows" page with the flag, then it loads to the normally welcome screen for windows 7 but nothing comes up.. its just the welcome screen background.
Anyone with info on this please reply.
View 3 Replies
View Related
Jun 16, 2011
my computer recently has started to reset the volume to 100% and keep it at that level, it is unable to be reduced to a better level.a week ago, I installed X-Lite 4, on my computer so i was able to start setting up my voip phone.this problem started about 4 days ago and i was able at first been able to get around it by restarting my computer but then some time later time varies, it would just reset volume to full level.with this doing this it has displayed on my screen bottom middle screen, a picture fo a speaker and showing volume bar at full. this is always ontop of all other windows.the only way I have been able to get rid of this is by stopping the service "audiosrv" through task manager.I have since done a scan with spybot, cleaned my computer with c cleaner, ran my virus scanner etc.
I have also changed property changes in audio settings and nothing has made a difference.I have also uninstalled x-lite, done a system restore to about 2 weeks ago, nothing still made any difference. I am running Windows 7 ultimate 32bit, on a pentium dual core at the moment I am thinking that maybe my audiosrv.dll file or something assoicated with it may be currupt or been infected and not being picked up so far.I have to be able to fix this issue with doing a fix. without a reinstall of the OS / software.
View 3 Replies
View Related
Jan 11, 2013
I have recently built myself a PC (Windows 7, i5) and it's running fine except for one problem. Every now and again, when I've been away from it, I find that it's reset itself. I don't think it's overheating as the machine has two extra case fans and the temps seem fine.How should I go about starting to investigate this as it has never reset itself while I've been there.
View 10 Replies
View Related
Jul 3, 2010
I use the Display Color Calibration program in Windows 7 to get my monitor's gamma down. It was working great until two or three days ago, but it now resets itself on reboot, every reboot. I've had this problem before and it was related to igfxpers.exe, but that is not among my startup items and thus isn't the issue. Oddly, during the Welcome screen, the gamma goes way up, then seems to come back to where it should be, only to get really bright again and stay there. Even stranger, if I run the calibration tool, bring the gamma down and just cancel the process, the gamma comes back down to where it should be.The problem seems to have cropped up after I upgraded to the newest version of Microsoft Security Essentials, but I'm not sure that's the cause of the issue.
View 2 Replies
View Related
Nov 7, 2011
I have the clock set to notify me when clock changes, and it always has a note as to when a change is scheduled for savings time, but it never notifies me nor changes the time on it's own. I always have to reset it myself and that is usually after the time confuses me enough for me to check the actual time.
How do I get it to reset automatically?
View 3 Replies
View Related
Jan 18, 2012
I have an issue with Windows 7.
Whatever time I set Windows 7 to (i.e. Eastern Time, Western Time, Coordinated Universal Time, etc.), on restart it sets itself to GMT, while still showing that I've selected the previous time zone I set (i.e. Eastern Time).
View 3 Replies
View Related
Apr 8, 2012
I am in the process of completing a new build and when I try to shutdown it just reboots.
- Turned off all "wake" features in the bios
- The only front panel connections I'm using are reset and power on buttons. Neither of which are sticking on
- Motherboard is out of case so there are no dropped screws shorting anything out
Win 7 Pro installed on Crucial 128mb SSD
Gigabyte GA-Z68XP-UD3 motherbrd
I7-2700K processor
G.Skill 2x 8Gb (2x4gb) DDR3 memory
old IBM PS/2 keybrd
old Micrsft USB mouse
onboard video
Coolermaster 1000W powersupply
View 3 Replies
View Related
Mar 13, 2011
I'm trying to get windows 7 ultimate on a new WD SATA hard drive. I get through the installation process which recognizes the drive and lets me install on it and seems to fully install. When it automatically restarts and the windows loading screen should appear, the computer just restarts itself and doesn't even let me get to windows.I've tried messing around with some of the BIOS settings, but I'm no expert in that and I seem to be running out of options.I've tried installing the x64 and x82- both give the same problem.One potential thing I'm seeing is that after the initial screen showing my computer specs on start up, I have a RAID screen which AFAIK shouldn't really matter too much since I'm just using one HD, but it does not detect any drives. Going into the RAID setup I can't change anything either because it needs to install something (which I can't - no floppy) or it won't let me for this configuration. My motherboard is a Foxconn 915G7AC/P7AC (unfortunately not the best when it comes to drivers and support stuff, hey - it was cheap and had good reviews when I bought it!)4 Gigs of RAM.My cd/dvd drive is SATA as well, in case that matters (from what I've read searching around other drives being SATA or IDE had some sort of effect)
View 10 Replies
View Related
Oct 4, 2012
I am still having issues with the webpage not responding ie9. I am using w7. I used the upgrade version w7 to change from vista, could I do a clean install using the upgrade version, where can I get the info on how to do this and what programs I need to back up?
View 2 Replies
View Related
Dec 28, 2011
So, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?
View 12 Replies
View Related
Jul 3, 2012
I have this issue resolved but I still wonder why it always resets to the wrong way.I always have to click on the set mode to "What you see is what you get".This wan't true until a few months ago.This isn't a big issue now that I know what to do (it drove my crazy for a while) but I'm curious as to whether there is a way to set the default to "What you see is what you get".
View 2 Replies
View Related
Jun 30, 2009
Some might remember I posted a few days ago about installing Windows 7 (64bit) separately on this same comp (different hard drive) to test what drivers worked for the devices I had, in particular the Canon scanner.
Anyway it worked, and I booted into Windows 7 64b fine - but I had a few issues getting back into 32-bit one (64bit one became the active boot. even after i used diskpart and bcdedit etc.
Anyway, I got the 32-bit install to again load as the default (and deleted the 64-bit partition). BUT, I keep getting the Vista booting screen - i.e. the small green loading bar instead of the elaborate "Starting Windows'. I then put in the Windows 7 dvd in and went to repair the install (to try & get the Windows 7 boot screen back), but it wouldnt even find the OS install to repair it.
So basically, its back to the 32bit Windows 7 install fine - but with the older Vista loading screen. Any ideas?
View 6 Replies
View Related
Dec 7, 2010
Loaded 7Ultimate and got to Install screen. Selected drive and made new partition. Clicked next. Received error: Quote: Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more info. I don't know how to get to the logs, but what does this message mean? I have tried almost 6 or 7 times and even once with my 7 Home edition disk. Ran the startup repair a couple times. Tried formatting the drive from my XP Pro sp3 disk.So now here's where the real problem comes in: ERROR LOADING OPERATING SYSTEM. Now I can't get back into XP! Tried booting from ERD Commander 05, but I get an error code 4096 with that, and "File SETUPREG.HIV could not be loaded".How can I get XP back to booting properly? Maybe it's a faulty hard drive and needs returning. But it is extremely important that I get this computer back up and running immediately.
View 5 Replies
View Related
Oct 3, 2012
I had dell inspiron 1525 on vista purchased 2years ago , a month back I gave it to technician for OS update. Its now working like charm on windows 7 . But the problem is , the stupid technician forget to load dell media direct on it.I searched many sites to install it without wiping my os , but no luck. how can I install it on laptop without reloading os again as I have so many softwares and data on my 500gb HD.or Can I do it by creating a partition with any drive ??
View 9 Replies
View Related
May 18, 2012
I have tried every solution I can find online, but nothing has worked. This is a brand new Windows 7 Professional 64-bit machine and I installed Office 2010 Pro Plus X64 and Outlook has never worked. I've tried reinstalling, scanpst.exe, /safe, /resetnavpane, recreating profiles.
View 1 Replies
View Related
Oct 21, 2011
Basically, whenever I start the computer up, it gets to the Windows login screen and loads it, at first, in full resolution (2048 x 1152) but immediately changes to 1024x768. Then once logged in I have to go in and change it back to full resolution. The problem started after I disconnected my monitor and connected it to my laptop with a VGA cable. Typically it's connected to this computer via DVI. I was thinking it might be a cable issue- one of the pins got damaged or something but I don't have another DVI cable to test with.
Specs:
Lenovo D20 4155 workstation
CPU: 2.67 ghz Intel Xeon x5550
Graphics: ATI FirePro v7750
Monitor: Samsung SyncMaster 2343BWX
What I've tried:
Updating windows
Re-installing The ATI driver and all the ATI software with the current version- reinstalled it with a newer version and reinstalled it with an older version. (I'm back to the newest version now)
Re-installed the Samsung monitor drivers
Ran an AV scan- no issues found.
View 3 Replies
View Related
Nov 11, 2012
I dont know whats going on with my PC I think some system files are corrupt but heres my problems:My PC locks up (freezes), reboots sometimes for no reason, flashes a BSOD sometimes, and one time It rebooted gave me error "bootmrg image is corrupt. the system can not start
View 14 Replies
View Related
Dec 17, 2012
I used Defogger to get rid of my mount drive, then used DDS to get a log I would get a friend to look at, and then used OTL to scan my computer. I ran the "fix" on OTL and everything went back to normal (IE home page stayed as set, and the dimmer buttons on my laptop started to work). Then came a Windows Update and restart after updating.
View 7 Replies
View Related
Sep 18, 2012
I cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
View 1 Replies
View Related