I have one hard disk 150GB on my computer. I want to install Windows 7 and divide the drive into two partitions. When I did it using the instructions that I had during setup, Windows 7 load only with the system drive! Where did all the other memory gone? Can I return the lost memory without installing again Windows 7?
View 2 Replies
My current hard drive is dying, so claims Windows and Hitachi Drive Fitness Test. I bought a replacement drive 3TB drive which requires GPT partitioning. I have 64 bit windows and a UEFI motherboard, so I know I can use the drive as a boot drive for a brand new installation.
My question is how do I move the entire contents of my old drive to this new drive and keep it bootable?
I asked on other another site and they suggested I first let the Windows installation disk partition the drive GPT correctly for Windows, then copy the contents of the old drive to the new one. However, another person on that site said that that would break all the symlinks (didn't know symlinks played such a crucial role in the OS) and that I should use a cloning utility that knows how to copy NTFS. Was this person off base, or is it impossible to create a bootable copy of a Windows installation by just copying all the files (this would be from live linux of some type, not Windows itself)? If it is impossible, is there a utility that can copy the contents of a partition correctly, without needing to clone the entire partition table? Also, I have no room to make an image of my old drive anywhere.
Finally, does anyone know if clonezilla can copy an mbr partition to a gpt partition automatically, essentially doing exactly what I need, or will it always copy the partition scheme as well?
My hard drive is partitioned C: and F:. Will a clean install of 7 over XP currently installed on C: mess with my F: drive?? In other words can I save all my stuff to F:??
View 2 Replies View RelatedNot exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies View RelatedI made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
View 9 Replies View RelatedI'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened. Now however I cannot get it to detect any CDs. It will not load anything.Now I looked and I realized that my CD/DVD drive was not listed on my computer.
View 3 Replies View RelatedOkay, so I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened.
Now however I cannot get it to detect any CDs. It will not load anything. Now I looked and I realized that my CD/DVD drive was not listed on my computer. I am trying to figure out what driver I had, so I can try re-installing it. I run a Dell Inspiron M5010 64 bit.
Kinda surprised me that I wasn't offered a choice on original Windows 7 install regarding volume size (maybe I missed it) or advised about that little 100MB hidden partition thing. But anyway I have my son's system partitioned in a manner that's comfy but have been having some annoying system issues. See link below:
Windows Explorer gets Tired & Can't logout
If these can't be resolved, wanted to reinstall Windows 7-64 fresh....Not really relevant but here's the partition scheme:
** - System reserved (100MB)
C: Boot Drive (64 GB)
D: Swap & Temp Files (16 GB)
E: Games (480 GB)
F: Programs (64 GB)
G: Data (256 GB)
H: Backups (remainder)
So I imagine that things haven't changed too much ... The install DvD will identify where Windows is and ask me what I wanna do but how does the presence of this 100 MB hidden partition fall into the mix ? Will it, like previous versions just write over what it needs and leave D thru H alone, or are special instructions necessary ?
I just turned on an almost new build pc to install windows 7. The entire pc is a new build except the hard drive that has a good copy of xp installed. I am trying to install a new copy of windows 7 on the hard drive. So I turned the pc on and go into the bios to set the DVD to boot first. So windows starts to install and the window is loading bar comes up. After the bar gets over half full, the screen drops and there is a line of h's on the left side of the screen and the installation freezes.
View 2 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View RelatedI just bought a new computer with a 256 disk partitioned into 2 drives: C (called OS) and D (Data). The computer writes everything to the smaller C drive, leaving D completely empty.I only have about 25G left on C and would like to find a way to change the way files are saved or some other workaround that will let me take advantage of the entire disk.I am not a very tech person - a mid-level user, so I need a solution, which will not create problems of programs not recognizing their paths afterwards.
View 2 Replies View RelatedI recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have Acer Extensa 5230E, with Celeron 900. the CPU can't handle most of the flash so I am thinking about replacing Win 7 with Win XP. (Q1. Is it better to use XP than 7 in this lappy?)I tried to make recovery DVD but don't have much success. So I am thinking about partitioning the hard-drive then save a recovery copy in the partitioned drive. Is there an option that I can do so? How do I install the win 7 from partitioned drive?
View 2 Replies View RelatedI have a Windows 7 32 Bit mini pc (SPO-Book Turo) It has 4Gigabytes of installed memory but windows will only use 3.The mini pc hasn't got a CD drive.I have put my windows installation files on my second partition of my 1000 gigabyte drive. My BIOS will not identify that the windows set up is on it what so ever.I am trying to install Windows 7 ultimate 64 bit.
View 9 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedSo I installed Windows 7 RC from the file directory from XP onto my other drive previously. I ran into problems the other day with XP and Windows 7 no longer shows up in the boot menu to select.
What are my options here? I am presently downloading the Windows Automated Installation Kit (AIK).
BTW, I can't find the original file for Windows 7 RC. Does anyone remember the name of it?
I'm trying windows 7.
After having installed it I've seen something strange.
I usually have the disk drive partitioned as following:
C partition, the root one (with programs and OS)
D partition, with all the stuff (projects, downloads, etc.)
Now, after the first boot in my computer I've seen only the partition C.
So, I've opened the computer management / Disk management. Here I've found the partition D.
So, I've assigned a letter to the partition D and now win7 seems to see that partition correctly.
But if I try to do a scandisk (via TOOLS / Error-Checking), a message appears asking to dismount the partition: 'Windows can't check the disk while it's in use. Do you want to dismount this volume first? Note: All opened handles to this volume will become invalid.'
That's sounds really weird to me. Now my doubt is how win7 is managing this partition.
Any hint?
After "C" disk partition, I installed Win 7 in "C" drive. How can I install Win XP Pro in "D" drive?
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedI bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive
2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
I am about to buy a new internal hard drive for my laptop, and want to do a clean install of Windows 7. My laptop came with XP, but I did an online upgrade to Windows 7 (student edition) Professional.
How can I create a bootable Windows 7 disk so when I put my new hard drive in my computer, it will setup Windows 7 for me? I also don't have any old XP disks because my laptop didn't come with any.
I looked on my C: Drive but couldnt find any .iso files or anything like that?
I'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
I have a 1 TB Western Digital Caviar Black hard disk. While installing Windows 7, a screen for hard disk partition was asked. I created 4 drives: 200 GB, 200 GB, 200 GB and 400 GB. And then the windows 7 got installed. But now when I log into my PC, I can only see first 3 200 GB drives. Where did my 400 GB drive go? What mistake did I do and how can I recover it back?
View 4 Replies View RelatedWhen we install windows 7 our E drive is hidden.
View 3 Replies View RelatedI am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
I can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
View 3 Replies View RelatedAfter installing Windows 7 on my PC all my hard disks(4) are display as removable disks in the icon of safely remove hardware on the taskbar. Is it related with enabling ACHI mode on my system?
View 1 Replies View RelatedI just installed a second hard disk on my MSI GT780 machine with 8GB of RAM, both drives are detected working perfectly. The old hdd, a generic 5400 rpm, is mainly for storage and the new one, 7200 rpm is where I installed my OS. Both are 500GB in capacity.The only thing I noticed is that I'm getting some lags, CPU usage would spike up to 90-100%, RAM never goes over 50% while gaming (Batman Arkham City and Battlefield 2). This never happened before I added the 2nd hdd and before then, I can have 2 games in the background (GTA4 & Battlefield 3) while browsing and music steaming with no problems at all. I updated the motherboard and VGA drivers after a fresh install on the new hdd.I'm using a 64bit Windows 7 Ultimate using the same installer I had for the old hd.
View 8 Replies View RelatedI bought an acer 4830TG in august 2011. Here's the description: AS4830TG-2434G75MN | Product Model..Everything worked fine with it. It was a very good machine... So when it was stolen from me I bought the exact same model and things went sour:I burned the recovery discs and subsequently installed a fresh Windows 7 Ultimate x64.Then I carefully installed all the necessary drivers etc... Exactly as i did with the first one.The problem is that every time i start an application that read/writes to the hard drives intensively, everything slows down, hangs or crash.When making a copy from my desktop computer over the network (directly through a crossed cat5e cable), the throughput initially reaches 50-70 Mb/s and rapidly comes down to 10-15 Mb/s. At this point, I can't to do anything with my laptop while copying in background... My browser is unresponsive for several seconds at a time, then is responsive again, then is unresponsive etc... If I try to play a video with VLC it seems it can't buffer more than 10 seconds of video before buffering again for several seconds (I solved that particular issue by moving the video file to a ramdisk prior to playback)... Simply opening My documents or the control panel takes more than a minute.
On rare occasions, the system crash and I get a BSOD. Note however that if I let the copy finish without doing anything else, everything works fine except for the low throughput. I know I can expect more than 15 Mb/s because with the first 4830TG it was generally over 50Mb/s.This kind of behavior also occurs when I'm burning a disc, when �torrent is checking a file, when I'm copying files from one partition to another etc.I can't figure out where lies the problem:
- all drivers are listed as "up to date" by windows update and there is no unknown device listed.
- RAM usage appears normal, the system is not overloaded with unnecessary applications. (At boot it uses about 1.2Go with AVG 2012 free, daemon tools, Malwarebyte's and dropbox)..
