Install Win Xp Pro In A Partitioned Empty Drive (d) As The (c) Drive?
Jan 6, 2013After "C" disk partition, I installed Win 7 in "C" drive. How can I install Win XP Pro in "D" drive?
View 2 RepliesAfter "C" disk partition, I installed Win 7 in "C" drive. How can I install Win XP Pro in "D" drive?
View 2 RepliesBefore I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedSo I installed Windows 7 RC from the file directory from XP onto my other drive previously. I ran into problems the other day with XP and Windows 7 no longer shows up in the boot menu to select.
What are my options here? I am presently downloading the Windows Automated Installation Kit (AIK).
BTW, I can't find the original file for Windows 7 RC. Does anyone remember the name of it?
My hard drive is partitioned C: and F:. Will a clean install of 7 over XP currently installed on C: mess with my F: drive?? In other words can I save all my stuff to F:??
View 2 Replies View RelatedI'm trying windows 7.
After having installed it I've seen something strange.
I usually have the disk drive partitioned as following:
C partition, the root one (with programs and OS)
D partition, with all the stuff (projects, downloads, etc.)
Now, after the first boot in my computer I've seen only the partition C.
So, I've opened the computer management / Disk management. Here I've found the partition D.
So, I've assigned a letter to the partition D and now win7 seems to see that partition correctly.
But if I try to do a scandisk (via TOOLS / Error-Checking), a message appears asking to dismount the partition: 'Windows can't check the disk while it's in use. Do you want to dismount this volume first? Note: All opened handles to this volume will become invalid.'
That's sounds really weird to me. Now my doubt is how win7 is managing this partition.
Any hint?
I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
I have Acer Extensa 5230E, with Celeron 900. the CPU can't handle most of the flash so I am thinking about replacing Win 7 with Win XP. (Q1. Is it better to use XP than 7 in this lappy?)I tried to make recovery DVD but don't have much success. So I am thinking about partitioning the hard-drive then save a recovery copy in the partitioned drive. Is there an option that I can do so? How do I install the win 7 from partitioned drive?
View 2 Replies View RelatedI have a Windows 7 32 Bit mini pc (SPO-Book Turo) It has 4Gigabytes of installed memory but windows will only use 3.The mini pc hasn't got a CD drive.I have put my windows installation files on my second partition of my 1000 gigabyte drive. My BIOS will not identify that the windows set up is on it what so ever.I am trying to install Windows 7 ultimate 64 bit.
View 9 Replies View RelatedNot exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies View RelatedI have one hard disk 150GB on my computer. I want to install Windows 7 and divide the drive into two partitions. When I did it using the instructions that I had during setup, Windows 7 load only with the system drive! Where did all the other memory gone? Can I return the lost memory without installing again Windows 7?
View 2 Replies View RelatedHow do I empty the recycle bin of an external drive?
View 6 Replies View RelatedI'm a photographer with 3 old-tower-based PCs that I look after myself, all with Win7 and SATA2 disks. Naturally, I need ever-larger storage space. To that end I moved all the data from a 1Tb disk to a 2Tb disk, then removed the 1Tb disk intending to replace it with a 3Tb disk. However, without the 1Tb disk, this PC would not boot, and the repair disk couldn't locate any Windows OS. But the OS is on another disk entirely (that remained connected throughout all this). I re-connected the 1Tb disk and the PC booted just fine. On inspection I find that this 1Tb disk - that I thought was entirely empty - has on it a 100MB System Reserved Partition that might relate to the MS back-up system that I've never used (as Win7 seems to point to this, although telling me it's not big enough to use for a backup!) By assigning a letter to this 100MB partition, I can see that there's a handful of (normally hidden) files and a directory relating to booting the PC. I therefore conclude that the PC is booting from this partition on the 1Tb disk, even though the OS is on a separate disk. How do I get the PC to boot from the 'OS' disk so that I can exchange the offending 1Tb drive with a 3Tb one? Or is there some other solution? Maybe I just copy this partition to the new disk? (BTW, I've already registered the 3Tb disk on the system.
View 9 Replies View RelatedMy systems keep trying to access the empty drive when opening or closing some programs or plugging in my printer or other devices. It is an HP dv6 laptop with Windows 7.
View 6 Replies View RelatedI have just bought a new computer and am running win 7.The C drive is fine but my external drive Maxtor 500gb connected by USB, is showing 465gb as used space when this is empty.In Disk management th drive is shown as 16gb, but in defrag screen the full 500gb are shown,what is using the 464gb that is empty?My previous computer running XP was showing the external drive correctly!
View 8 Replies View RelatedI have most of my games & Steam on this particular SSD & every time I access the drive to add a mod etc there is always at least 50 empty locked .tmp folders (lost count of the number of times I've deleted them) they are all variously named but all start with MSI.. what are they & how can I prevent them from being continuously created.
View 3 Replies View RelatedAssume I open WinExplorer and click on the CD-ROM/DVD drive letter E: The whole DVD content is shown. Fine. Now I eject the DVD by opening the tray. As a result the whole WinExplorer collapses and auto-closes itself. UI guess because drive is automatically removed then a drive is empty. How can I prevent this auto-closing resp. show the drive letter even if the drive is empty?
View 1 Replies View RelatedI recently reformatted my Windows 7 32bit system on my primary HDD (C). When I open My Computer, my secondary HDD (D) appears, but when I try to open it, it shows as empty. However, if I look at the properties of D, it says that only 200gb out of 500gb of free space is available. I booted into a live version of Ubuntu and the secondary HDD appears with all data in it and accessible, so I know there is nothing physically wrong with the drive. I know that I could brute force this problem by making a copy of the drive in Ubuntu, then reformatting it in Win7, but I'm hoping there's an easier solution that I'm just not aware of.
View 5 Replies View RelatedI have an eSATA drive that has stopped functioning properly. I was trying unsuccessfully to install some completely unrelated software when I noticed that my eSATA drive was presenting differently. Under My Computer it now said that the drive was empty and there were four drives that appeared that said "Removable Disk (G)", "Removable Disk (H)", "Removable Disk (I)", and "Removable Disk (J)". When I select my eSATA drive, it says 'folder empty'. When I select one of the removable disk drives it says "Please insert a disk into removable disk (?). Whenever I reboot the computer with the eSATA drive disconnected, all five disk drives go away. I don't remember changing any settings or anything like that. One thing is odd that in device manager, the eSATA drive comes up as a SCSI drive. The device manager shows it as "WDC WD10EADS-65M2B1 SCSI Disk Device", but it is actually a "WDC WD500F032".
[System Summary]
Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HOME
[code]...
I have a 500gb seagate external hard drive, and already used 240gb space. It worked fine until yesterday suddenly i could not access the files at all. I checked disk management, and it showed that my external drive became RAW drive. I tried to do chkdsk that I learned from one of the forum, and then it somehow has fixed the RAW drive back to FAT32. However I still cannot see any of my files. I opened command prompt, and typed in dir /a and it said 0 files 0 bytes, 4 DIR 288,714, 293, 248 bytes free. How can I bring my files back?? I don't want to lose my files.
View 4 Replies View RelatedI have my mothers dell inspiron laptop at the moment When you turn it on it cascades the message "Failed to save all the components for the file \\System32\\00002ed7. The file is corrupted or unreadable. This error may be caused by a Hardware Problem." A system check box then appears and does a scan. When you press Fix Errors. Its unable to fix 9 errors and you have to purchase the full version. Virus maybe????? I am unable to delete the system check box from the system tray. The screen is just a black background and all the icons have disappeared. When I press the windows icon and all programs the file icons appear but when I click on them they say Empty.
View 2 Replies View RelatedAfter getting rid of windows 7 hard drive failure virus my start menu programs are empty.
View 2 Replies View RelatedCheck my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I had Windows XP operating system with users and saved my files on a partition. Just installed Windows 7 and now I can't access the partitioned files due to permissions. If I try to open a file, I get the message "You Don't Currently Have Permission To Access This Folder: Click continue to permanently get access to this folder". If I click continue, it tells me to go to the security tab. Once there, it tells me it's unable to display the current owner. I can still gain access to the specific folder (as an administrator) but not the sub-folders. There are thousands of folders and I would have to do them individually. Is there a way to blanket share all the files on my partitioned drive?
View 3 Replies View RelatedI have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
I have recently completed a fresh install of Windows 7 64bit on my laptop (Dell Studio 15) using the supplied Dell CD. The install went fine.
The Problem:
My drive is partitioned into various logical drives - i've installed the Operating System onto one (c), all my programs onto one, and games onto another etc.
Now, after the fresh install I no longer have any installed programs in Programs and Features or the Start Menu (however the programs are still installed on the logical drives). If i go to the programs' folder and open the shortcut they are not loading correctly, and i get various error messages or problems depending on the program.
How can i:
1) Get my programs to work correctly without manually finding all the uninstall folders and then re-installing them. 2) Add the programs back to the start menu and Programs and Features.
My current hard drive is dying, so claims Windows and Hitachi Drive Fitness Test. I bought a replacement drive 3TB drive which requires GPT partitioning. I have 64 bit windows and a UEFI motherboard, so I know I can use the drive as a boot drive for a brand new installation.
My question is how do I move the entire contents of my old drive to this new drive and keep it bootable?
I asked on other another site and they suggested I first let the Windows installation disk partition the drive GPT correctly for Windows, then copy the contents of the old drive to the new one. However, another person on that site said that that would break all the symlinks (didn't know symlinks played such a crucial role in the OS) and that I should use a cloning utility that knows how to copy NTFS. Was this person off base, or is it impossible to create a bootable copy of a Windows installation by just copying all the files (this would be from live linux of some type, not Windows itself)? If it is impossible, is there a utility that can copy the contents of a partition correctly, without needing to clone the entire partition table? Also, I have no room to make an image of my old drive anywhere.
Finally, does anyone know if clonezilla can copy an mbr partition to a gpt partition automatically, essentially doing exactly what I need, or will it always copy the partition scheme as well?
I have a Gigabyte 880GM-D2H motherboard. I am trying to install Windows 7 on a separate SSD drive(OCZ-Vertex3) but Windows does not see this drive, but it is listed in my BIOS..
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies View RelatedInstall LG Super multi drive install disc for windows
View 1 Replies View Related