I have the clock set to notify me when clock changes, and it always has a note as to when a change is scheduled for savings time, but it never notifies me nor changes the time on it's own. I always have to reset it myself and that is usually after the time confuses me enough for me to check the actual time.
How do I get it to reset automatically?
my computer recently has started to reset the volume to 100% and keep it at that level, it is unable to be reduced to a better level.a week ago, I installed X-Lite 4, on my computer so i was able to start setting up my voip phone.this problem started about 4 days ago and i was able at first been able to get around it by restarting my computer but then some time later time varies, it would just reset volume to full level.with this doing this it has displayed on my screen bottom middle screen, a picture fo a speaker and showing volume bar at full. this is always ontop of all other windows.the only way I have been able to get rid of this is by stopping the service "audiosrv" through task manager.I have since done a scan with spybot, cleaned my computer with c cleaner, ran my virus scanner etc.
I have also changed property changes in audio settings and nothing has made a difference.I have also uninstalled x-lite, done a system restore to about 2 weeks ago, nothing still made any difference. I am running Windows 7 ultimate 32bit, on a pentium dual core at the moment I am thinking that maybe my audiosrv.dll file or something assoicated with it may be currupt or been infected and not being picked up so far.I have to be able to fix this issue with doing a fix. without a reinstall of the OS / software.
I have recently built myself a PC (Windows 7, i5) and it's running fine except for one problem. Every now and again, when I've been away from it, I find that it's reset itself. I don't think it's overheating as the machine has two extra case fans and the temps seem fine.How should I go about starting to investigate this as it has never reset itself while I've been there.
View 10 Replies View RelatedI use the Display Color Calibration program in Windows 7 to get my monitor's gamma down. It was working great until two or three days ago, but it now resets itself on reboot, every reboot. I've had this problem before and it was related to igfxpers.exe, but that is not among my startup items and thus isn't the issue. Oddly, during the Welcome screen, the gamma goes way up, then seems to come back to where it should be, only to get really bright again and stay there. Even stranger, if I run the calibration tool, bring the gamma down and just cancel the process, the gamma comes back down to where it should be.The problem seems to have cropped up after I upgraded to the newest version of Microsoft Security Essentials, but I'm not sure that's the cause of the issue.
View 2 Replies View RelatedI have an issue with Windows 7.
Whatever time I set Windows 7 to (i.e. Eastern Time, Western Time, Coordinated Universal Time, etc.), on restart it sets itself to GMT, while still showing that I've selected the previous time zone I set (i.e. Eastern Time).
I am in the process of completing a new build and when I try to shutdown it just reboots.
- Turned off all "wake" features in the bios
- The only front panel connections I'm using are reset and power on buttons. Neither of which are sticking on
- Motherboard is out of case so there are no dropped screws shorting anything out
Win 7 Pro installed on Crucial 128mb SSD
Gigabyte GA-Z68XP-UD3 motherbrd
I7-2700K processor
G.Skill 2x 8Gb (2x4gb) DDR3 memory
old IBM PS/2 keybrd
old Micrsft USB mouse
onboard video
Coolermaster 1000W powersupply
I have this issue resolved but I still wonder why it always resets to the wrong way.I always have to click on the set mode to "What you see is what you get".This wan't true until a few months ago.This isn't a big issue now that I know what to do (it drove my crazy for a while) but I'm curious as to whether there is a way to set the default to "What you see is what you get".
View 2 Replies View RelatedBasically, whenever I start the computer up, it gets to the Windows login screen and loads it, at first, in full resolution (2048 x 1152) but immediately changes to 1024x768. Then once logged in I have to go in and change it back to full resolution. The problem started after I disconnected my monitor and connected it to my laptop with a VGA cable. Typically it's connected to this computer via DVI. I was thinking it might be a cable issue- one of the pins got damaged or something but I don't have another DVI cable to test with.
Specs:
Lenovo D20 4155 workstation
CPU: 2.67 ghz Intel Xeon x5550
Graphics: ATI FirePro v7750
Monitor: Samsung SyncMaster 2343BWX
What I've tried:
Updating windows
Re-installing The ATI driver and all the ATI software with the current version- reinstalled it with a newer version and reinstalled it with an older version. (I'm back to the newest version now)
Re-installed the Samsung monitor drivers
Ran an AV scan- no issues found.
I dont know whats going on with my PC I think some system files are corrupt but heres my problems:My PC locks up (freezes), reboots sometimes for no reason, flashes a BSOD sometimes, and one time It rebooted gave me error "bootmrg image is corrupt. the system can not start
View 14 Replies View RelatedI used Defogger to get rid of my mount drive, then used DDS to get a log I would get a friend to look at, and then used OTL to scan my computer. I ran the "fix" on OTL and everything went back to normal (IE home page stayed as set, and the dimmer buttons on my laptop started to work). Then came a Windows Update and restart after updating.
View 7 Replies View RelatedI've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme
CPU: Intel Core i7 - 2600k
Ram: 8GB G.Skill RipjawsX
Graphics: Sapphire Radeon HD 7970 3GB
PSU: Antec High Current Pro HCP -750
SSD: Samsung 830 256GB
HD: Seagate Barracuda 2TB
Cooling: Antec Kuhler H20 920
OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
I cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
View 1 Replies View RelatedI'm at my wits end now though, After several attempts at installing Win 7 RC (64bit) I realised it wouldn't let me becasue I hadn't added the latest drivers for my motherboard. Now it appears to have installed but whenever windows starts, it reboots at the point where the first 'red dot' appears (the four colours swirl in to make the window).
I ran in safe mode and it appears to reboot whenever it gets as far as 'system32/drivers/disk.sys'
I have installed to three different HDD, both IDE and SATA. All clean before the start. I've used an IDE DVD drive and a USB external, and my BIOS is totally up to date. I've now striped the PC of everything none essential.
The latest drivers for the motherboard are the Vista 64bit variety because there are no windows 7 drivers (that I could see).
P.S. I also obtained a copy of the 90day release version of 64bit Ultimate, which a friend has successfully installed on his Vista laptop. I've tried installing this with all the same configs and same problem every time.
I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies View Relatedat seemingly random intervals, I'll "wake up" my computer only to find its date/time entry is suddenly same date, same time, but YEAR 7011.Not too surprisingly, things don't work right when the computer year is that far off-- which is usually what tips me off that it's happened yet again. AOL may not work, or I may bet alerts that computer protection is "no longer valid" (well gee, 5000 years from now, not surprised). WHAT causes these repeated changes of the computer's year setting?
View 1 Replies View RelatedWhen I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot?
View 9 Replies View RelatedI have a couple of programs who's icons I have set to always show, one of them is mailwasher for example. Everything is fine until my wife logs onto her account when I log back onto mine mailwasher becomes hidden again by. So it means I have to unhide it every time she logs on. It's not all icons that do this
View 8 Replies View RelatedI've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies View RelatedI was customising which icons I wanted to do what, and the clock dissapeared at some point. Now I can't figure out how to get it back
View 9 Replies View RelatedI have a digital clock that is synched with time.gov. but the PC clock always seems to lose seconds compared to it.
View 6 Replies View RelatedThe clock slows down about 20 min per day. It's fine before I upgraded to Windows 7 (along with BIOS update).
View 4 Replies View RelatedI have two computers which I upgraded to Windows 7. Both now have what I call clock freezes. When I click on the clock it does upgrade the time. Any ideas?
View 1 Replies View RelatedI recently got a used computer from a friend and I have discovered that the clock is always set to 2009-08-07. The clock cycles from 4:02 AM- 5:02 AM and it resets itself. If I try to change it then the computer becomes very slow and laggy, however, the mouse is not. I have run my anti virus to see if it is a virus but there was none detected. I suspect it might be something to do with my motherboard.
System specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3036 Mb
Graphics Card: Intel(R) G41 Express Chipset, 1294 Mb
Hard Drives: C: Total - 184886 MB, Free - 121869 MB; D: Total - 228188 MB, Free - 151259 MB; E: Total - 119999 MB, Free - 81271 MB;
Motherboard: Dell Inc., 07N90W
Antivirus: V3 Internet Security, Updated and Enabled
My clock stops "staying on top" after a couple hours after every time I boot. Since my taskbar is set to disappear, I like having a clock readily visible. Is this because I'm using a third party gadget, or is there a fix for this?
View 4 Replies View Relatedany alarm clocks for windows 7?im on x64
View 6 Replies View RelatedAt exactly the stroke of every hour my computer clock plays a sound. And it is getting really annoying. can anybody tell me how to stop it from playing that sound every hour. It has been going on for a week at first I ignored it and now its driving me up the walls
View 3 Replies View RelatedI am looking for a digital clock gadget. Please reply soon.
View 9 Replies View RelatedJust recently the clock in the bottom right corner of the desktop keeps changing!
it will change to a random date and time very regular.I will sync the clock but it will change again....can i stop this?
the one that displays on the lower task bar, right hand side, and see if it (now) displays the correct GMT (same as UTC) ? Since the start of the New Year, mine displays the wrong GMT, even though I'm pretty sure it is all set up correctly. Can't seem to get it to display correctly.
It used to.
It was there, over on the far right of the taskbar, together with the date, then somehow I removed it from the task bar, but now want to get it back. How to do that?
View 4 Replies View Related
