I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 RepliesMy laptop wakes up for no reason after I put it to sleep. I unplugged my USB things and it still doesn't solve. When I do powercfg -lastwake it gives me this:
Wake History [0]
Wake Source Count - 1
Type: Fixed Feature
Power Button
This does not have to do with an outdated driver(Most likely) It happened when I decided to decrease the brightness.
when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
Whenever I try to put my laptop into sleep mode, it wakes back up a few seconds later without me touching anything. Has anyone come across this before? I just reformatted my computer and this didn't happen before the reformat.
View 4 Replies View RelatedI've had an HP dv5t laptop for about a year and a half (see specs), and so far (knock on wood) it's been pretty much perfect EXCEPT for one problem that has been happening on and off for the last several months. It occurs about once or twice a month for no apparent reason --- and I don't know if this this is a hardware or a software problem. What happens is that all of a sudden, for no reason my keyboard and touchpad/mouse are completely non-responsive -- and the only thing I can do is use the power button to shut down. When I reboot everything seems fine, until the next time it happens, a week or two later. It can happen when the laptop is running, but more often it happens when I open the lid after the system has been in Sleep mode. (I keep the laptop in 'Sleep' mode all the time when the lid is closed, and only fully "shut down" once in a while.) Everything seems to load properly --- the Desktop looks perfect and all my apps/icons are there, but the mouse won't move and the keyboard doesn't respond.
View 2 Replies View RelatedWhen I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot?
View 9 Replies View RelatedIt is the most bizarre thing. Either it goes to sleep by the timer setting or I can use the "Start button" then select sleep. It closes up properly and looks all hunky-dori. Then between 30 and 45 seconds later, it wakes up again.
I heard it happening enough last night that I had to turn the computer off. I joke that it only needs 45 seconds of sleep and is ready for work again..
Obviously my problem is my pc wont sleep, it wakes a second or two after I press sleep. I checked google and this forum for a few hours and come up empty handed. Event viewer has no record of the pc even going into sleep mode, through the filter "power - troubleshooter".
View 3 Replies View RelatedI've looked through the Advanced Power Settings options and not found something that appeared to be an issue to me. It still auto wakes up with Allow wake timers set to Disable and When sharing media under Multimedia Settings set to Allow the computer to sleep.I also ran powercfg -lastwake in cmdafter an automatic wake up and these were the results:
View 6 Replies View Relatedwhen I wake up my computer from sleep, it will turn on (all of the fans and lights start running) but there is nothing displayed on either of my monitors.I have my hard drive set to "never turn off" and this hasn't helped the problem.
View 9 Replies View RelatedI am running a Windows 7 HTPC, which connects to an LCD TV. Unfortunately, I keep getting automatic screen resolution and aspect ratio changes all the time.Each time I start the PC from from a complete powered off state, I have to go to the TV settings and change the aspect ratio. Many times, not each time, when I wake up the PC from from a sleep state, the resolution of the screen changes automatically from 1200 x 720 to the lowest 800x600.
View 1 Replies View RelatedI've got a pretty regular and predictable usage pattern with my computer - quick logon in the morning to check emails, go to work, use computer at night, restart before bed.The computer is set to sleep after three hours of inactivity. So in the morning it will be sleeping, then when I get home from work same thing. Sometimes not; never figured what wakes the computer, but 90% of the time, that's how that works - it sleeps after three hours, and stays sleeping for several hours.However, this week I noticed that the computer seemingly never sleeps. It's always on when I come by it, including in the morning, and when I get home from work.Checked the system log in the event viewer for events 1 (wakeup) and 42(sleep), and I noticed that, into the morning of 9/16, the normal pattern of several hours of sleep was adhered to. Since 9/16 though, every sleep period lasts about 2 1/2 minutes. That is, it goes to sleep (event 42), and then within 2-3 minutes, it will wake up (event 1).There have been no Windows updates in that time that would affect this. Definition updates for Windows Defender on 9/18 and 9/21, and KB2744842 (security update for IE 9 on x64 systems) on 9/22, but nothing happened, including no new software installations, on 9/15 or 9/16.So why is my computer suddenly waking from sleep almost immediately?
View 9 Replies View RelatedWin 7 wakes from sleep several times a day ... during night time it looks to be about 1 hr (+or-) withe the event log showing the following:"Wake Source: Device -Realtek PCIe GBE Family Controller"
View 3 Replies View RelatedI'm positive that I'm not bumping into the mouse or anything to accidentally wake it as I make sure to turn my wireless mouse off once I've finished a session on the computer. and often times the computer will wake in the middle of the night. I will select sleep mode before going to bed and when I wake up it will be running like normal
View 4 Replies View RelatedMy desktop won't stay asleep. It consistenly wakes back up after approximately 50 seconds.This happens regardless of whether I manually select Sleep from the start menu, or if it goes to sleep on its own.
System Specs:
Windows 7 64-bit Service Pack 1 (problem also existed prior to service pack)
ASUS M3N78-VM motherboard.
AMD Phenom II X6 1055T Processor 2.80GHz
8 GB Ram
Samsung SSD 830 Series 64GB SSD drive (boot drive)
2 SATA HDDs mirrored with onboard NVIDIA RAID
AMD Radeon HD 6950 Video Card (problem existed before this was added)
Things I've tried:
BIOS set to S3 Only (previously set to auto)All "Power On By" options in the BIOS set to Disabled Unplugged all USB devices (including KB/Mouse) and Network Cable Unchecked "Allow this device to wake the computer" on Network Interface
powercfg -lastwake reports:
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
All devices in Device Manager appear to have the correct device drivers. No yellow exclamations.
I've had this problem every since I built my new rig - the thing either won't go to sleep, or will wake back up if I put it to sleep manually. It doesn't do it all the time, but it happens enough to be an annoyance.
Here's what powercfg says after it wakes up:
Code: C:UsersCharles>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
[Code].....
This has been an ongoing issue with my computer only waking from sleep half the time. The other half I need to actually power cycle my machine in order for it to wake. I know when it is going to wake properly because I hear the DAC on my Asus Xonar Essence STX Sound Card click on and if it's not going to work obviously I don't hear the click.I have tried the following:
- Complete system rebuild with new hard drives, reinstall of windows
- All drivers updated and bios updated (I have been through a fair few driver updates because this has been an issue for over a year)
- New Memory installed
- Played with as many power settings in the bios as possible
I am really starting to think it is a hardware issue with either my motherboard or video card but don't have a spare of each of these and don't want to buy new stuff just to test it.
Here are my Specs:
Motherboard: Asus P8Z68-V Pro
CPU: Intel i7 2600
Video Card: Gigabyte 6950 (in eyefinity with 3 Monitors)
Sound Card: Asus Xonar Essence STX
HDD: 2 x 240GB Sandisk Extreme SSD (Raid0)
Memory: Kingston Hyper X 4x4GB (16GB Total)
PSU: Seasonic X Series 750w
Monitors: Samsung MD230x3 (3x23") 2 connected via DVI and 1 via DisplayPort
As mentioned the hard drives and memory were replaced so it can't be either of those. Also it can't be any settings because it does wake via my keyboard/mouse half the time. It is also hard to troubleshoot as it may work 3 times ok and even wake form sleep overnight but then I could leave it for 30 mins come back and it won't wake that time, there is no pattern that I can make out, not sure what else I can do to troubleshoot this but it is really annoying as my computer gets a lot of use and would rather put it to sleep than continually turn it off and on.
I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to Windows 7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was spamming the power button. I have tried searching for answers, and one solution I have tried was the "network card activity problem". However, it didn't work.
View 9 Replies View Relatedi thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
View 4 Replies View RelatedWhenever my system is woken from I assume its sleep mode ( My power options are Sleep mode after 30mins and 'Turn off Display' after 10mins". I commonly find some programs will not work,they start to load up and then hang.A windows 7 prompt comes up and I then click 'Show problem details' to reveal the following below in the case of my attempted starting of Paint Shop Pro. This particular time around, Excel and Word opened all the way and also alowed data entry but as soon as you click on the round symbol in the top left corner to save etc it also did nothing but say 'program not responding in the very top bar.Description:A problem caused this program to stop interacting with Windows.[CODE]OS and most applications all installed on a 120gb OCZ Vertex 2 SSD with a 1Tb Samsung F3 Spinpoint drive holding all my pic,movie,sound files, word docs, excel docs etc. I try to save zero application files on the SSD but all on the HD.
View 9 Replies View RelatedI use win 7 home premiun and everytime my computer wakes up from sleep my the taskbar stays stuck for 1-2 minutes. I have downloaded a a program called process explorer to see what is running in windows explorer. I used a option in process explorer called kill the process on the programs that are running but it doesn't do anything.
View 5 Replies View RelatedEvery night I put my laptop to sleep but lately the laptop wakes up on it's own in the middle of the night every night. Anyone knows what might cause this phenomena ?
View 1 Replies View RelatedWhen my laptop wakes up from sleep mode, my wireless turns off for about 2-5 minutes. The screen also flashes, the task bar switches from black to clear. When wireless starts working again, the screen flashes a second time and the task bar returns to black.
View 2 Replies View RelatedI have a laptop with a monitor attached. I use to be able to come in and move the mouse to wake up the system. Now, I need to open the laptop and push the power button. I have gone into System/Device Manager/Mice.... and there is no option to "allow device to wake up". My knowledge is limited, but I do understand some things. I just don't see what could have caused this change. It just happened out of the blue!
View 7 Replies View RelatedI am running windows 7 pro with two monitors. one is vga the hdmi. i have selected the screen i want as the main display and saved the settings. at random with reboot they will swap and then i have to reconfigure my desktop. i have tried swapping both the monitor and the port connection to no avail. how do i make it keep my settings?
View 2 Replies View RelatedWindows 7 Home Premium: I want my PC to sleep after 20 minutes, so I can leave it on all night and come back in the morning and start using it right away. ( I have a password, so no one could steal it or anything, and start using it )
I have a screen saver setup to come on after 5 minutes, and sleep mode after 20.
I have it on a APC UPS set with their software, to silent, so if the power goes out overnight ( very rare and usually short ) it won't beep and wake me up. Besides, if it's asleep, it could literally go for days without power line power.
My problem is not remembering sometimes, because I come in half asleep when I wake up, and see a black screen, then reach over and hit the UPS button, not realizing I'm turning it OFF instead of ON!
But is there a way to set Windows up so that it DOES go to sleep after 20 minutes, but some kind of minimal screen saver keeps going on the screen, so I KNOW it's in sleep mode and not off?
I use the Mystify screen saver anyway, which is pretty minimal, so if that could be kept on while the Hard Drive and everything else that uses power and ages the electronics sleeps, that would be great.
I just got a new computer with Windows 7 home premium. After it opens up,and is idle about 3 min. it go to sleep. Where would I find the setting to make the time longer before it go to sleep.
View 2 Replies View RelatedI remember in earlier versions of windows I could put my computer to sleep and still have some functionality.. such as audio. How do I shut the display and still hear my audio? If I put the computer to sleep, the audio also shuts down.
View 3 Replies View Relatedmy display doesn't go to sleep, even after setting it at 1 minute. are there any applications that can tell me what is staying active, thus preventing display sleeping?
system specs
OS Windows 7 Ultimate x64
CPU Intel i5 750
Motherboard Gigabyte P55A-UD3P
Memory OCZ Obsidian PC12800 2x2GB
Graphics Card(s) XFX 285 GTX
Monitor(s) Displays Philips 170C
I brough a Samsung notebook recently and found that it will go to sleep mode automatically when I close the display. I tried to change the action of closing display in the power settings, however, I found that the options are dimmed and I cannot change it. Could anyone teach me how can I change it? My notebook is Samsung RF710, windows7 home premium 64 bits
View 3 Replies View Related