Obviously my problem is my pc wont sleep, it wakes a second or two after I press sleep. I checked google and this forum for a few hours and come up empty handed. Event viewer has no record of the pc even going into sleep mode, through the filter "power - troubleshooter".
View 3 RepliesI've looked through the Advanced Power Settings options and not found something that appeared to be an issue to me. It still auto wakes up with Allow wake timers set to Disable and When sharing media under Multimedia Settings set to Allow the computer to sleep.I also ran powercfg -lastwake in cmdafter an automatic wake up and these were the results:
View 6 Replies View RelatedI have been trying to run down a problem of my pc waking from sleep as soon as i close the screen. I have been throught the device mgr, mgmt.msc, pc is updated, and i only experience this when i close the top.....if i put the pc to sleep and dont close the top it works perfectly....close the top....5 seconds later....pc wakes and the logs report says that its the power button is waking the pc....dont know how because i cant access power button when the top is closed...
View 9 Replies View RelatedMy laptop wakes up for no reason after I put it to sleep. I unplugged my USB things and it still doesn't solve. When I do powercfg -lastwake it gives me this:
Wake History [0]
Wake Source Count - 1
Type: Fixed Feature
Power Button
This does not have to do with an outdated driver(Most likely) It happened when I decided to decrease the brightness.
It is the most bizarre thing. Either it goes to sleep by the timer setting or I can use the "Start button" then select sleep. It closes up properly and looks all hunky-dori. Then between 30 and 45 seconds later, it wakes up again.
I heard it happening enough last night that I had to turn the computer off. I joke that it only needs 45 seconds of sleep and is ready for work again..
This problem has started recently. Moreover, new software and drivers have not been installed. When I put my computer into sleep mode, it immediately restarts itself, and when it restarts, it produces the �Windows Did Not Shut Down Properly� error.
View 9 Replies View RelatedWhen I sleep or hibernate my computer, within 10 seconds of it turning off, it turns back on again by itself. When it turns back on, there is no output on my monitor. I used remote desktop from another computer to see whether it was just the video that wasn't being reposted, but when I tried to connect, it couldn't find the computer. None of the keys work on my keyboard, including the sleep and power buttons.
I have an ASUS P5LD2 Deluxe motherboard, and an Intel 3.0 GHz processor. I'm also running the x64 version of Windows 7.
Any ideas how to stop it starting up autonomously ?
when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
Whenever I try to put my laptop into sleep mode, it wakes back up a few seconds later without me touching anything. Has anyone come across this before? I just reformatted my computer and this didn't happen before the reformat.
View 4 Replies View Relatedwhen I wake up my computer from sleep, it will turn on (all of the fans and lights start running) but there is nothing displayed on either of my monitors.I have my hard drive set to "never turn off" and this hasn't helped the problem.
View 9 Replies View RelatedI am running a Windows 7 HTPC, which connects to an LCD TV. Unfortunately, I keep getting automatic screen resolution and aspect ratio changes all the time.Each time I start the PC from from a complete powered off state, I have to go to the TV settings and change the aspect ratio. Many times, not each time, when I wake up the PC from from a sleep state, the resolution of the screen changes automatically from 1200 x 720 to the lowest 800x600.
View 1 Replies View RelatedI've had an HP dv5t laptop for about a year and a half (see specs), and so far (knock on wood) it's been pretty much perfect EXCEPT for one problem that has been happening on and off for the last several months. It occurs about once or twice a month for no apparent reason --- and I don't know if this this is a hardware or a software problem. What happens is that all of a sudden, for no reason my keyboard and touchpad/mouse are completely non-responsive -- and the only thing I can do is use the power button to shut down. When I reboot everything seems fine, until the next time it happens, a week or two later. It can happen when the laptop is running, but more often it happens when I open the lid after the system has been in Sleep mode. (I keep the laptop in 'Sleep' mode all the time when the lid is closed, and only fully "shut down" once in a while.) Everything seems to load properly --- the Desktop looks perfect and all my apps/icons are there, but the mouse won't move and the keyboard doesn't respond.
View 2 Replies View RelatedI've got a pretty regular and predictable usage pattern with my computer - quick logon in the morning to check emails, go to work, use computer at night, restart before bed.The computer is set to sleep after three hours of inactivity. So in the morning it will be sleeping, then when I get home from work same thing. Sometimes not; never figured what wakes the computer, but 90% of the time, that's how that works - it sleeps after three hours, and stays sleeping for several hours.However, this week I noticed that the computer seemingly never sleeps. It's always on when I come by it, including in the morning, and when I get home from work.Checked the system log in the event viewer for events 1 (wakeup) and 42(sleep), and I noticed that, into the morning of 9/16, the normal pattern of several hours of sleep was adhered to. Since 9/16 though, every sleep period lasts about 2 1/2 minutes. That is, it goes to sleep (event 42), and then within 2-3 minutes, it will wake up (event 1).There have been no Windows updates in that time that would affect this. Definition updates for Windows Defender on 9/18 and 9/21, and KB2744842 (security update for IE 9 on x64 systems) on 9/22, but nothing happened, including no new software installations, on 9/15 or 9/16.So why is my computer suddenly waking from sleep almost immediately?
View 9 Replies View RelatedWin 7 wakes from sleep several times a day ... during night time it looks to be about 1 hr (+or-) withe the event log showing the following:"Wake Source: Device -Realtek PCIe GBE Family Controller"
View 3 Replies View RelatedWindows 7 64-bit
ASUS P7P55D-E LX
Core i5-750
Just the other day, I bought a Samsung 830 SSD and tried to install it yesterday. There were several problems, including the SSD not showing up in disk management and Windows Explorer, but showing up in device manager, and showing up in the BIOS. The biggest problem, however, was learning that my motherboard could not do SATA 6 without halving my PCI-E x16 lane. Anyway, I decided to hold off on the SSD until my next build and I'm sending it back.
The issue now is that I cannot put my computer to sleep. When I do, it resumes within a second or so. I tried unplugging every device from it, including my Ethernet cable and all USB devices, and it still persists. I also changed power management to disallow my network card from waking my computer, and changed the suspend mode of my USB controller to disallow them to wake the computer as well.
While installing the SSD, I recall changing the SATA 6 Marvell controller from IDE to AHCI (two SATA 6 ports are controlled by Marvell (into which I plugged my SSD) and the others by JMicron). As of writing, the Marvell controller is back to IDE and has nothing plugged into it. I also installed a few SATA controller drivers while attempting to get SATA 6 speeds and trying to figure out why my SSD was not showing up in disk management (I could not even format it via a right-click and it had no drive letter).
My suspend mode is set to "Auto" in BIOS, same as it's always been. Perhaps this has nothing to do with my failed installation of the SSD. But it only began after I tried to install it.
I'm positive that I'm not bumping into the mouse or anything to accidentally wake it as I make sure to turn my wireless mouse off once I've finished a session on the computer. and often times the computer will wake in the middle of the night. I will select sleep mode before going to bed and when I wake up it will be running like normal
View 4 Replies View RelatedMy desktop won't stay asleep. It consistenly wakes back up after approximately 50 seconds.This happens regardless of whether I manually select Sleep from the start menu, or if it goes to sleep on its own.
System Specs:
Windows 7 64-bit Service Pack 1 (problem also existed prior to service pack)
ASUS M3N78-VM motherboard.
AMD Phenom II X6 1055T Processor 2.80GHz
8 GB Ram
Samsung SSD 830 Series 64GB SSD drive (boot drive)
2 SATA HDDs mirrored with onboard NVIDIA RAID
AMD Radeon HD 6950 Video Card (problem existed before this was added)
Things I've tried:
BIOS set to S3 Only (previously set to auto)All "Power On By" options in the BIOS set to Disabled Unplugged all USB devices (including KB/Mouse) and Network Cable Unchecked "Allow this device to wake the computer" on Network Interface
powercfg -lastwake reports:
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
All devices in Device Manager appear to have the correct device drivers. No yellow exclamations.
I've had this problem every since I built my new rig - the thing either won't go to sleep, or will wake back up if I put it to sleep manually. It doesn't do it all the time, but it happens enough to be an annoyance.
Here's what powercfg says after it wakes up:
Code: C:UsersCharles>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
[Code].....
This has been an ongoing issue with my computer only waking from sleep half the time. The other half I need to actually power cycle my machine in order for it to wake. I know when it is going to wake properly because I hear the DAC on my Asus Xonar Essence STX Sound Card click on and if it's not going to work obviously I don't hear the click.I have tried the following:
- Complete system rebuild with new hard drives, reinstall of windows
- All drivers updated and bios updated (I have been through a fair few driver updates because this has been an issue for over a year)
- New Memory installed
- Played with as many power settings in the bios as possible
I am really starting to think it is a hardware issue with either my motherboard or video card but don't have a spare of each of these and don't want to buy new stuff just to test it.
Here are my Specs:
Motherboard: Asus P8Z68-V Pro
CPU: Intel i7 2600
Video Card: Gigabyte 6950 (in eyefinity with 3 Monitors)
Sound Card: Asus Xonar Essence STX
HDD: 2 x 240GB Sandisk Extreme SSD (Raid0)
Memory: Kingston Hyper X 4x4GB (16GB Total)
PSU: Seasonic X Series 750w
Monitors: Samsung MD230x3 (3x23") 2 connected via DVI and 1 via DisplayPort
As mentioned the hard drives and memory were replaced so it can't be either of those. Also it can't be any settings because it does wake via my keyboard/mouse half the time. It is also hard to troubleshoot as it may work 3 times ok and even wake form sleep overnight but then I could leave it for 30 mins come back and it won't wake that time, there is no pattern that I can make out, not sure what else I can do to troubleshoot this but it is really annoying as my computer gets a lot of use and would rather put it to sleep than continually turn it off and on.
I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to Windows 7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was spamming the power button. I have tried searching for answers, and one solution I have tried was the "network card activity problem". However, it didn't work.
View 9 Replies View Relatedi thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
My computer fails to sleep when asked, it re-awakens immediately or shortly afterwards.
View 5 Replies View RelatedI keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies View RelatedWhenever my system is woken from I assume its sleep mode ( My power options are Sleep mode after 30mins and 'Turn off Display' after 10mins". I commonly find some programs will not work,they start to load up and then hang.A windows 7 prompt comes up and I then click 'Show problem details' to reveal the following below in the case of my attempted starting of Paint Shop Pro. This particular time around, Excel and Word opened all the way and also alowed data entry but as soon as you click on the round symbol in the top left corner to save etc it also did nothing but say 'program not responding in the very top bar.Description:A problem caused this program to stop interacting with Windows.[CODE]OS and most applications all installed on a 120gb OCZ Vertex 2 SSD with a 1Tb Samsung F3 Spinpoint drive holding all my pic,movie,sound files, word docs, excel docs etc. I try to save zero application files on the SSD but all on the HD.
View 9 Replies View RelatedI use win 7 home premiun and everytime my computer wakes up from sleep my the taskbar stays stuck for 1-2 minutes. I have downloaded a a program called process explorer to see what is running in windows explorer. I used a option in process explorer called kill the process on the programs that are running but it doesn't do anything.
View 5 Replies View RelatedA few days (probably about 3) ago, I installed StarStaX. I'm a photographer, and I also have Lightroom and Photoshop Cs5 installed on my computer. Early in the day, it was totally fine, but then, my mouse gave out. It's a real piece of junk that you had to plug in and unplug to get working every time you'd restart the computer, (but it was USB, so no worries). Fortunately, I have a Wacom Tablet that I could use instead. However, when shortly after I started using the tablet, as soon as I opened StarStaX it would shut down saying the program had stopped working, even though it had been fine that morning. I tried opening it back up several times but the same thing happened. So I tried the old mouse again, which still wasn't working. An error message stating that an "unknown USB device" was connected to the computer started showing up for the first time. Anyways, to get StarStaX to load, I had to shut down Photoshop (and possibly Lightroom) and even then it was still iffy. Not long after, once I was done stacking photos, Lightroom began displaying the same shutdown message, most often if I went to change the color temperature of photo (so just a slider) or if I went to edit in Photoshop. Previously, these programs had run very quickly, even with several other programs like iTunes or Photomatix running. Now even Photoshop usually has to be the only one running or it will end immediately. So, I installed CCleaner, (I have no internet on the described computer so I had to carry it over via a Flash Drive), and deleted a lot of junk. I also took off some programs I know for sure I wouldn't use. When it still wasn't working, I ran Error Check on the C Drive (I think that's how you say it), and it still will not work. After this, on the advice of another user, I downloaded a program called Advanced SystemCare but that did not work.I am unsure as to what could be causing this problem, so sorry if it would be more appropriate elsewhere. It is not connected to the internet, so I don't think it's a virus, but I am unsure.Here's the specs on my computer according to SysInfo:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 830 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 7927 Mb
Graphics Card: RS880, 256 Mb
Hard Drives: C: Total - 941622 MB, Free - 658375 MB; D: Total - 11955 MB, Free - 1449 MB;
Motherboard: FOXCONN, 2A92
Antivirus: None
[code]....
I've referred to Shut Down Windows ShortcutFirst time I did a hotkey, somehow it worked, BUT it asked me "What do you want the computer to do?"I wouldn't like it sitting on my desktop either. & now the hotkey is not working whatsoever. I'd like to just press the keys anytime anywhere so my PC will shut right down
View 9 Replies View RelatedI recently installed windows 7 after buying a new hard disk cause my old one died.It ran smoothly for about 2 days but all of the sudden when i choose to shut down it simply restarts and when i shut it down by pressing the power button the next time i turn it on it says i should do a system repair which i do and doesnt help. Also my wlan always starts off,before the problems it was enable right when i started my pc.
View 9 Replies View RelatedI've just reinstalled my Windows 7 (purely for speed), but while my previous installation of Real Player had no problem downloading live streams for recording, I'm stuck this time around to figure out how to get past a new error msg.I go to File/Open & put in the stream name - this particular one is shown in the msg below. When I try to connect I immediately get a popup box with this msgI've tried it with 3 different versions of Real Player but get the identical msg every time,s not necessarily the Player's settings.I have a Belkin Play router & am using Microsoft SE as my antivirus program and use both Firefox & IE9 as browsers.I've no understanding of UDP/TCP & ports etc & really don't want to start meddling with them until I know that's what I really have to do, & also get specific instructions etc.
View 1 Replies View RelatedThis problem started a few months ago when I updated the video drivers on my NVIDIA card. What happens is that when the pc goes to sleep, either by my command or after timing out for inactivity, the pc will wake up when prompted by mouse or keyboard, but the monitors don't. I know the pc wakes because when tapping on keys or clicking the mouse button I will occasionally hear pings from the pc. I'm not convinced that the problem is NVIDIA's, but this does coincide with an updated driver of theirs.Ultimately, in order to get my machine working again I have to press the power button and restart cold. Also, and I'm not sure if this is worth noting, upon cold start, my Kaspersky and clock gadgets, which are normally placed in the upper-right corner of the right monitor, display in the left monitor somewhere off-center.
I'm diligent with keeping drivers updated, but I really have no idea what to do now. I'll post the stuff that may be relevant:Logitech wireless mouse M310 (unified w/ keyboard)Logitech wireless Solar keyboard K750 (unified w/ mouse)(2) LG monitors E2050NVIDIA GeForce GTX 460 video cardWindows 7 Home Premium (service pack 1)64-bit OSAMD Phenom II x4 945 processor 3.00 GHz8.00 GB ram
how can i find out why my Windows 7 wakes up from standby every morning after 6 o'clock? i was thinking the event viewer might help here - but i do not really know what to look for.
View 4 Replies View Related