Screen Resolution Changes After Pc Wakes Up From Sleep
Sep 8, 2011
I am running a Windows 7 HTPC, which connects to an LCD TV. Unfortunately, I keep getting automatic screen resolution and aspect ratio changes all the time.Each time I start the PC from from a complete powered off state, I have to go to the TV settings and change the aspect ratio. Many times, not each time, when I wake up the PC from from a sleep state, the resolution of the screen changes automatically from 1200 x 720 to the lowest 800x600.
View 1 Replies
ADVERTISEMENT
Sep 22, 2012
My laptop wakes up for no reason after I put it to sleep. I unplugged my USB things and it still doesn't solve. When I do powercfg -lastwake it gives me this:
Wake History [0]
Wake Source Count - 1
Type: Fixed Feature
Power Button
This does not have to do with an outdated driver(Most likely) It happened when I decided to decrease the brightness.
View 1 Replies
View Related
May 30, 2011
It is the most bizarre thing. Either it goes to sleep by the timer setting or I can use the "Start button" then select sleep. It closes up properly and looks all hunky-dori. Then between 30 and 45 seconds later, it wakes up again.
I heard it happening enough last night that I had to turn the computer off. I joke that it only needs 45 seconds of sleep and is ready for work again..
View 1 Replies
View Related
Apr 13, 2012
Obviously my problem is my pc wont sleep, it wakes a second or two after I press sleep. I checked google and this forum for a few hours and come up empty handed. Event viewer has no record of the pc even going into sleep mode, through the filter "power - troubleshooter".
View 3 Replies
View Related
Dec 21, 2011
when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
View 2 Replies
View Related
Sep 18, 2010
Whenever I try to put my laptop into sleep mode, it wakes back up a few seconds later without me touching anything. Has anyone come across this before? I just reformatted my computer and this didn't happen before the reformat.
View 4 Replies
View Related
Jan 8, 2012
I've looked through the Advanced Power Settings options and not found something that appeared to be an issue to me. It still auto wakes up with Allow wake timers set to Disable and When sharing media under Multimedia Settings set to Allow the computer to sleep.I also ran powercfg -lastwake in cmdafter an automatic wake up and these were the results:
View 6 Replies
View Related
Apr 1, 2010
when I wake up my computer from sleep, it will turn on (all of the fans and lights start running) but there is nothing displayed on either of my monitors.I have my hard drive set to "never turn off" and this hasn't helped the problem.
View 9 Replies
View Related
May 28, 2011
I've had an HP dv5t laptop for about a year and a half (see specs), and so far (knock on wood) it's been pretty much perfect EXCEPT for one problem that has been happening on and off for the last several months. It occurs about once or twice a month for no apparent reason --- and I don't know if this this is a hardware or a software problem. What happens is that all of a sudden, for no reason my keyboard and touchpad/mouse are completely non-responsive -- and the only thing I can do is use the power button to shut down. When I reboot everything seems fine, until the next time it happens, a week or two later. It can happen when the laptop is running, but more often it happens when I open the lid after the system has been in Sleep mode. (I keep the laptop in 'Sleep' mode all the time when the lid is closed, and only fully "shut down" once in a while.) Everything seems to load properly --- the Desktop looks perfect and all my apps/icons are there, but the mouse won't move and the keyboard doesn't respond.
View 2 Replies
View Related
Sep 22, 2012
I've got a pretty regular and predictable usage pattern with my computer - quick logon in the morning to check emails, go to work, use computer at night, restart before bed.The computer is set to sleep after three hours of inactivity. So in the morning it will be sleeping, then when I get home from work same thing. Sometimes not; never figured what wakes the computer, but 90% of the time, that's how that works - it sleeps after three hours, and stays sleeping for several hours.However, this week I noticed that the computer seemingly never sleeps. It's always on when I come by it, including in the morning, and when I get home from work.Checked the system log in the event viewer for events 1 (wakeup) and 42(sleep), and I noticed that, into the morning of 9/16, the normal pattern of several hours of sleep was adhered to. Since 9/16 though, every sleep period lasts about 2 1/2 minutes. That is, it goes to sleep (event 42), and then within 2-3 minutes, it will wake up (event 1).There have been no Windows updates in that time that would affect this. Definition updates for Windows Defender on 9/18 and 9/21, and KB2744842 (security update for IE 9 on x64 systems) on 9/22, but nothing happened, including no new software installations, on 9/15 or 9/16.So why is my computer suddenly waking from sleep almost immediately?
View 9 Replies
View Related
Aug 7, 2012
Win 7 wakes from sleep several times a day ... during night time it looks to be about 1 hr (+or-) withe the event log showing the following:"Wake Source: Device -Realtek PCIe GBE Family Controller"
View 3 Replies
View Related
Mar 1, 2012
I'm positive that I'm not bumping into the mouse or anything to accidentally wake it as I make sure to turn my wireless mouse off once I've finished a session on the computer. and often times the computer will wake in the middle of the night. I will select sleep mode before going to bed and when I wake up it will be running like normal
View 4 Replies
View Related
Jan 21, 2012
My desktop won't stay asleep. It consistenly wakes back up after approximately 50 seconds.This happens regardless of whether I manually select Sleep from the start menu, or if it goes to sleep on its own.
System Specs:
Windows 7 64-bit Service Pack 1 (problem also existed prior to service pack)
ASUS M3N78-VM motherboard.
AMD Phenom II X6 1055T Processor 2.80GHz
8 GB Ram
Samsung SSD 830 Series 64GB SSD drive (boot drive)
2 SATA HDDs mirrored with onboard NVIDIA RAID
AMD Radeon HD 6950 Video Card (problem existed before this was added)
Things I've tried:
BIOS set to S3 Only (previously set to auto)All "Power On By" options in the BIOS set to Disabled Unplugged all USB devices (including KB/Mouse) and Network Cable Unchecked "Allow this device to wake the computer" on Network Interface
powercfg -lastwake reports:
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
All devices in Device Manager appear to have the correct device drivers. No yellow exclamations.
View 9 Replies
View Related
Aug 30, 2011
I've had this problem every since I built my new rig - the thing either won't go to sleep, or will wake back up if I put it to sleep manually. It doesn't do it all the time, but it happens enough to be an annoyance.
Here's what powercfg says after it wakes up:
Code: C:UsersCharles>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
[Code].....
View 2 Replies
View Related
Aug 16, 2012
This has been an ongoing issue with my computer only waking from sleep half the time. The other half I need to actually power cycle my machine in order for it to wake. I know when it is going to wake properly because I hear the DAC on my Asus Xonar Essence STX Sound Card click on and if it's not going to work obviously I don't hear the click.I have tried the following:
- Complete system rebuild with new hard drives, reinstall of windows
- All drivers updated and bios updated (I have been through a fair few driver updates because this has been an issue for over a year)
- New Memory installed
- Played with as many power settings in the bios as possible
I am really starting to think it is a hardware issue with either my motherboard or video card but don't have a spare of each of these and don't want to buy new stuff just to test it.
Here are my Specs:
Motherboard: Asus P8Z68-V Pro
CPU: Intel i7 2600
Video Card: Gigabyte 6950 (in eyefinity with 3 Monitors)
Sound Card: Asus Xonar Essence STX
HDD: 2 x 240GB Sandisk Extreme SSD (Raid0)
Memory: Kingston Hyper X 4x4GB (16GB Total)
PSU: Seasonic X Series 750w
Monitors: Samsung MD230x3 (3x23") 2 connected via DVI and 1 via DisplayPort
As mentioned the hard drives and memory were replaced so it can't be either of those. Also it can't be any settings because it does wake via my keyboard/mouse half the time. It is also hard to troubleshoot as it may work 3 times ok and even wake form sleep overnight but then I could leave it for 30 mins come back and it won't wake that time, there is no pattern that I can make out, not sure what else I can do to troubleshoot this but it is really annoying as my computer gets a lot of use and would rather put it to sleep than continually turn it off and on.
View 3 Replies
View Related
Jan 15, 2010
I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to Windows 7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was spamming the power button. I have tried searching for answers, and one solution I have tried was the "network card activity problem". However, it didn't work.
View 9 Replies
View Related
Nov 19, 2012
i thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
View 8 Replies
View Related
Jun 9, 2012
I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies
View Related
Jul 23, 2011
Whenever my system is woken from I assume its sleep mode ( My power options are Sleep mode after 30mins and 'Turn off Display' after 10mins". I commonly find some programs will not work,they start to load up and then hang.A windows 7 prompt comes up and I then click 'Show problem details' to reveal the following below in the case of my attempted starting of Paint Shop Pro. This particular time around, Excel and Word opened all the way and also alowed data entry but as soon as you click on the round symbol in the top left corner to save etc it also did nothing but say 'program not responding in the very top bar.Description:A problem caused this program to stop interacting with Windows.[CODE]OS and most applications all installed on a 120gb OCZ Vertex 2 SSD with a 1Tb Samsung F3 Spinpoint drive holding all my pic,movie,sound files, word docs, excel docs etc. I try to save zero application files on the SSD but all on the HD.
View 9 Replies
View Related
Oct 2, 2010
I use win 7 home premiun and everytime my computer wakes up from sleep my the taskbar stays stuck for 1-2 minutes. I have downloaded a a program called process explorer to see what is running in windows explorer. I used a option in process explorer called kill the process on the programs that are running but it doesn't do anything.
View 5 Replies
View Related
Feb 12, 2012
I have been trying to run down a problem of my pc waking from sleep as soon as i close the screen. I have been throught the device mgr, mgmt.msc, pc is updated, and i only experience this when i close the top.....if i put the pc to sleep and dont close the top it works perfectly....close the top....5 seconds later....pc wakes and the logs report says that its the power button is waking the pc....dont know how because i cant access power button when the top is closed...
View 9 Replies
View Related
Jul 30, 2009
For some reason, my 'sleep' has stopped working - either from the sleep button, or on the Start button option.
Now it just goes to the user login screen.
Has always worked perefctly until today.
Weird. Any ideas?
View 2 Replies
View Related
Dec 9, 2008
i'm having some trouble with my screen resolution . i set it at (800x600) cause i'm using a 51 inch big screen hd tv. it go's full screen but then for no reason it puts the bars back on the sides of the screen. i checked and it still reads (800x600) and i can't get it to change back to full screen until i reboot. works fine in vista . i'm not seeing anything about drivers failing so i'm not sure what's happening.
View 5 Replies
View Related
Jun 30, 2012
for the past month i have had an issue where before the log in screen would show, it would be a blank screen with a cursor, that i could move. (It worked normal in safe mode) I normally would just ignore this problem and it seemed to go back to normal after a little while. Well yesterday it didn't go away, so i went online looking for a solution, in safe mode. I've read to disable/enable drivers, re-install drivers, just plenty of things. And the result of all this is that my screen resolution wont go back to normal, and there is a black border around my screen, around a half inch. Also, my computer has been running EXTREME slow lately.
View 1 Replies
View Related
Apr 4, 2012
my screen resultion only gives me a wide screen, but i want the monitor to have a full screen. to fit top and buttom how can i do that ?
View 4 Replies
View Related
Apr 4, 2011
I have recently been running my computer for really long periods and have only just turned it off last night.When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to safe mode resolution.
So iI have tried changing the resolution (Normal is 1920x1080), with no luck. Even though it says it is on 1920x1080 (recommmended), I know for a fact that it's not actually that resolution.You can tell by this photo that the desktop is way to large for 1920x1080. Unfortunetly I do not have a photo of my original desktop resolution .I have installed the latest NVIDIA graphics driver, and it is the right driver for my card. Also checked all windows updates.
Specs:
Graphics Card - GTX 460
Monitor - BenQ G2420HD
View 7 Replies
View Related
Apr 23, 2009
I have just purchased a 9600GT which is capable of a resolution of 2560x1600 but my monitor is only stated to be 1680-1050, My question is this, would it do my monitor any damage to force upon it the said 2560-1600?
Edit: It is an acer 22" and not one in specs.
View 7 Replies
View Related
Sep 13, 2009
i have used to connect to my pc (vista x64 Radeon 4670) through vnc that is connected to a fullhd tv via hdmi. When i shut down the tv nothing happened to the screen resolution when connected through vnc but now with Windows 7 x64.
when i turn off the tv the resolution changes to some lower and i cant use the whole 1920x1080 and after turning the tv on again it resizes to the full resolution but with icons on desktop without any order! Is there any way to Windows 7 not automatic change resolution when turning off the tv like in vista?
View 1 Replies
View Related
Oct 31, 2009
I was wondering if I could enter my own numbers or get a smalller resolution.
The highest as far goes up to 1040 * 743 [NUMBERS MIGHT BE WRONG]
Can i make it go up to like 1240 * 840?
View 1 Replies
View Related
May 20, 2011
, i am running windows 7 on a flattron lg screen my resolution does not look right. my computer has me at 800x 600 is that the right setting i thought it was1024x600
View 1 Replies
View Related
Nov 30, 2011
I have tried everything to keep the screen resolution at it's max but to no avail. When I change pages the screen reduces to a small size. After repeated attempts to keep the screen size to it's fullest the size changes back to small. Yes, I had done everything that the help section said to do and hit the apply button and keep changes. It only stays for a one page then reverts back to the small screen.
View 1 Replies
View Related
