when I wake up my computer from sleep, it will turn on (all of the fans and lights start running) but there is nothing displayed on either of my monitors.I have my hard drive set to "never turn off" and this hasn't helped the problem.
View 9 RepliesI've got a pretty regular and predictable usage pattern with my computer - quick logon in the morning to check emails, go to work, use computer at night, restart before bed.The computer is set to sleep after three hours of inactivity. So in the morning it will be sleeping, then when I get home from work same thing. Sometimes not; never figured what wakes the computer, but 90% of the time, that's how that works - it sleeps after three hours, and stays sleeping for several hours.However, this week I noticed that the computer seemingly never sleeps. It's always on when I come by it, including in the morning, and when I get home from work.Checked the system log in the event viewer for events 1 (wakeup) and 42(sleep), and I noticed that, into the morning of 9/16, the normal pattern of several hours of sleep was adhered to. Since 9/16 though, every sleep period lasts about 2 1/2 minutes. That is, it goes to sleep (event 42), and then within 2-3 minutes, it will wake up (event 1).There have been no Windows updates in that time that would affect this. Definition updates for Windows Defender on 9/18 and 9/21, and KB2744842 (security update for IE 9 on x64 systems) on 9/22, but nothing happened, including no new software installations, on 9/15 or 9/16.So why is my computer suddenly waking from sleep almost immediately?
View 9 Replies View RelatedI'm positive that I'm not bumping into the mouse or anything to accidentally wake it as I make sure to turn my wireless mouse off once I've finished a session on the computer. and often times the computer will wake in the middle of the night. I will select sleep mode before going to bed and when I wake up it will be running like normal
View 4 Replies View RelatedThis has been an ongoing issue with my computer only waking from sleep half the time. The other half I need to actually power cycle my machine in order for it to wake. I know when it is going to wake properly because I hear the DAC on my Asus Xonar Essence STX Sound Card click on and if it's not going to work obviously I don't hear the click.I have tried the following:
- Complete system rebuild with new hard drives, reinstall of windows
- All drivers updated and bios updated (I have been through a fair few driver updates because this has been an issue for over a year)
- New Memory installed
- Played with as many power settings in the bios as possible
I am really starting to think it is a hardware issue with either my motherboard or video card but don't have a spare of each of these and don't want to buy new stuff just to test it.
Here are my Specs:
Motherboard: Asus P8Z68-V Pro
CPU: Intel i7 2600
Video Card: Gigabyte 6950 (in eyefinity with 3 Monitors)
Sound Card: Asus Xonar Essence STX
HDD: 2 x 240GB Sandisk Extreme SSD (Raid0)
Memory: Kingston Hyper X 4x4GB (16GB Total)
PSU: Seasonic X Series 750w
Monitors: Samsung MD230x3 (3x23") 2 connected via DVI and 1 via DisplayPort
As mentioned the hard drives and memory were replaced so it can't be either of those. Also it can't be any settings because it does wake via my keyboard/mouse half the time. It is also hard to troubleshoot as it may work 3 times ok and even wake form sleep overnight but then I could leave it for 30 mins come back and it won't wake that time, there is no pattern that I can make out, not sure what else I can do to troubleshoot this but it is really annoying as my computer gets a lot of use and would rather put it to sleep than continually turn it off and on.
I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to Windows 7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was spamming the power button. I have tried searching for answers, and one solution I have tried was the "network card activity problem". However, it didn't work.
View 9 Replies View Relatedi thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
I use win 7 home premiun and everytime my computer wakes up from sleep my the taskbar stays stuck for 1-2 minutes. I have downloaded a a program called process explorer to see what is running in windows explorer. I used a option in process explorer called kill the process on the programs that are running but it doesn't do anything.
View 5 Replies View RelatedMy laptop wakes up for no reason after I put it to sleep. I unplugged my USB things and it still doesn't solve. When I do powercfg -lastwake it gives me this:
Wake History [0]
Wake Source Count - 1
Type: Fixed Feature
Power Button
This does not have to do with an outdated driver(Most likely) It happened when I decided to decrease the brightness.
It is the most bizarre thing. Either it goes to sleep by the timer setting or I can use the "Start button" then select sleep. It closes up properly and looks all hunky-dori. Then between 30 and 45 seconds later, it wakes up again.
I heard it happening enough last night that I had to turn the computer off. I joke that it only needs 45 seconds of sleep and is ready for work again..
Obviously my problem is my pc wont sleep, it wakes a second or two after I press sleep. I checked google and this forum for a few hours and come up empty handed. Event viewer has no record of the pc even going into sleep mode, through the filter "power - troubleshooter".
View 3 Replies View Relatedwhen i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
Whenever I try to put my laptop into sleep mode, it wakes back up a few seconds later without me touching anything. Has anyone come across this before? I just reformatted my computer and this didn't happen before the reformat.
View 4 Replies View RelatedI've looked through the Advanced Power Settings options and not found something that appeared to be an issue to me. It still auto wakes up with Allow wake timers set to Disable and When sharing media under Multimedia Settings set to Allow the computer to sleep.I also ran powercfg -lastwake in cmdafter an automatic wake up and these were the results:
View 6 Replies View RelatedI am running a Windows 7 HTPC, which connects to an LCD TV. Unfortunately, I keep getting automatic screen resolution and aspect ratio changes all the time.Each time I start the PC from from a complete powered off state, I have to go to the TV settings and change the aspect ratio. Many times, not each time, when I wake up the PC from from a sleep state, the resolution of the screen changes automatically from 1200 x 720 to the lowest 800x600.
View 1 Replies View RelatedI've had an HP dv5t laptop for about a year and a half (see specs), and so far (knock on wood) it's been pretty much perfect EXCEPT for one problem that has been happening on and off for the last several months. It occurs about once or twice a month for no apparent reason --- and I don't know if this this is a hardware or a software problem. What happens is that all of a sudden, for no reason my keyboard and touchpad/mouse are completely non-responsive -- and the only thing I can do is use the power button to shut down. When I reboot everything seems fine, until the next time it happens, a week or two later. It can happen when the laptop is running, but more often it happens when I open the lid after the system has been in Sleep mode. (I keep the laptop in 'Sleep' mode all the time when the lid is closed, and only fully "shut down" once in a while.) Everything seems to load properly --- the Desktop looks perfect and all my apps/icons are there, but the mouse won't move and the keyboard doesn't respond.
View 2 Replies View RelatedWin 7 wakes from sleep several times a day ... during night time it looks to be about 1 hr (+or-) withe the event log showing the following:"Wake Source: Device -Realtek PCIe GBE Family Controller"
View 3 Replies View RelatedMy desktop won't stay asleep. It consistenly wakes back up after approximately 50 seconds.This happens regardless of whether I manually select Sleep from the start menu, or if it goes to sleep on its own.
System Specs:
Windows 7 64-bit Service Pack 1 (problem also existed prior to service pack)
ASUS M3N78-VM motherboard.
AMD Phenom II X6 1055T Processor 2.80GHz
8 GB Ram
Samsung SSD 830 Series 64GB SSD drive (boot drive)
2 SATA HDDs mirrored with onboard NVIDIA RAID
AMD Radeon HD 6950 Video Card (problem existed before this was added)
Things I've tried:
BIOS set to S3 Only (previously set to auto)All "Power On By" options in the BIOS set to Disabled Unplugged all USB devices (including KB/Mouse) and Network Cable Unchecked "Allow this device to wake the computer" on Network Interface
powercfg -lastwake reports:
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
All devices in Device Manager appear to have the correct device drivers. No yellow exclamations.
I've had this problem every since I built my new rig - the thing either won't go to sleep, or will wake back up if I put it to sleep manually. It doesn't do it all the time, but it happens enough to be an annoyance.
Here's what powercfg says after it wakes up:
Code: C:UsersCharles>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
[Code].....
I keep having to go back and adjust color and contrast every time my laptop wakes up from sleep. I keep hearing it's something to do with the drivers, but I tried going to device manager, right clicking on display adapter and seeing if there are updates and it says i have the latest installed.I just got this computer too, so you'd think it'd come with all the new drivers?
View 2 Replies View RelatedWhenever my system is woken from I assume its sleep mode ( My power options are Sleep mode after 30mins and 'Turn off Display' after 10mins". I commonly find some programs will not work,they start to load up and then hang.A windows 7 prompt comes up and I then click 'Show problem details' to reveal the following below in the case of my attempted starting of Paint Shop Pro. This particular time around, Excel and Word opened all the way and also alowed data entry but as soon as you click on the round symbol in the top left corner to save etc it also did nothing but say 'program not responding in the very top bar.Description:A problem caused this program to stop interacting with Windows.[CODE]OS and most applications all installed on a 120gb OCZ Vertex 2 SSD with a 1Tb Samsung F3 Spinpoint drive holding all my pic,movie,sound files, word docs, excel docs etc. I try to save zero application files on the SSD but all on the HD.
View 9 Replies View RelatedMy computer wakes from hibernation.I�m using windows 7 x64. My BIOS doesn�t support any configuration settings about wake, and the LAN device driver states that it doesn�t support wake on LAN.It�s a Dell Lattitude laptop, about 2 years old.No events are relevant.This started about 6 months ago when I went out and updated all my drivers, so some driver is apparently having fun. I had already run for long enough when it started that I didn�t want to roll back, although I have tried earlier versions of the LAN, WAN and WLAN drivers. None of them have an option for disabling wake on LAN that can be checked.
C:>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count � 0
C:>powercfg -devicequery wake_armed
gives no output.
Every few days my computer will wake from sleep in the middle of the night and to find out why I check lastwake from the command prompt and got this in attachment. I looked in WMC and didn't find any auto updating turned on. How do I turn this off? I really don't use WMC that much and don't need it waking my computer to update.
View 7 Replies View RelatedMy computer occasionally wakes up from Standby. I have a USB-based KVM switcher providing mouse and keyboard. When I want to put it in Standby, I first switch the switcher to my other computer, then I go into Standby by pressing the power button. When I want to use the computer again, I first switch the switcher back to the computer, then press the power button. Waking up from Standby spontaneously is not a major problem, as it is set to go back to Standby after several minutes. But I'm curious as to what might be happening.
View 4 Replies View RelatedI am having a most unusual problem where my system wakes itself from sleep when I walk by.. Sometimes randomly also but most times when I walk over to my desk it will wake by itself for no reason. This is quite annoying and i would greatly appreciate any help in identifying the cause.
View 18 Replies View RelatedDVD rom is not displayed in the computer?
View 2 Replies View RelatedSometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
View 1 Replies View RelatedJust upgraded to Windows 7 today and have been totally loving it! Its so much faster than Vista.
I just have one major problem that has been bothering me. I dont know whether its a bug or just a noob mistake on my part but I am unable to see any drives whatsoever in the "computer" folder. I have tried disabling/enabling the "Show empty drives" thing but to no avail.
It would be great if someone could help me out with this issue.
I don't really use Media Center much but everynight around 2:30 am my PC wakes up after it has been put in sleep mode. I finally tracked the culprit down in the evnt viewer to be the media center update causing it to wake up. Is there a way to turn MC auto updating off?
View 5 Replies View RelatedI have also recently been experiencing random shut downs during hibernate. I don't even realize it has happened until I go to wake up my computer.
Windows 7 Home Premium, x64
Gateway FX6840
Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz
I have a different sort of problem with grouping.
See, I'm a game modder, and this requires me to have many folders open at once. The problem is, when my computer goes to sleep and then wakes up, the order of my folders on the taskbar is changed. This bugs me to no end, and I'm wondering how I can stop this reordering from happening.
Windows 7 Home Premium 64-bit SP1.Have 7 standard users created in the User Accounts. Only 5 user icons displaying on welcome screen. All 7 users are required to and do have passwords set.Creating a new user does not add that new user to the welcome screen.Deleting a user does not move one of the other users onto the welcome screen..it reduced the number of user icons to 4.All users have valid User directories and if I force the login prompt instead of icons, they can login successfully.This happened about a week ago and may be the result of some software my son installed. Not sure.There is not an "Other User.." icon...just 5 valid user icons with 2 missing.
View 9 Replies View Related