I don't really use Media Center much but everynight around 2:30 am my PC wakes up after it has been put in sleep mode. I finally tracked the culprit down in the evnt viewer to be the media center update causing it to wake up. Is there a way to turn MC auto updating off?
View 5 RepliesEvery few days my computer will wake from sleep in the middle of the night and to find out why I check lastwake from the command prompt and got this in attachment. I looked in WMC and didn't find any auto updating turned on. How do I turn this off? I really don't use WMC that much and don't need it waking my computer to update.
View 7 Replies View Relatedwhwere to update HP media center m8200n BIOS driver? my current is v5.27, is there any new ones? the mothboard is ECS Nettle 2.
View 1 Replies View RelatedI have done the following:Went to "Turn Windows features on and Off", both Media Center and Media Player are checked. I unchecked and the checked them, no Media anywhere."Start menu and then in the upper right corner type in media center. It will start searching the whole computer for media center". I had a file, Media Center Programs dated 11/21/10, when I clicked on it I got "This Folder is empty". I installed this Dell computer 7/10/11. None of the newer files were helpful.Searched the Dell Reinstallation DVD thoroughly and found an icon for windows media center, I clicked it and it popped up with the following warning: Windows Media Center has lost its remote connections to Windows Media Player. Restart and try again.I don't know what to do, Windows Media Center and Player are definitely not on my Win 7 64 Bit desktop. I realize it was most likely installed by Dell but I don't remember deleting it or how.I tried to download WMC on Microsoft site but when I did it said what I had (Version 12.0.7601.17514) is newer than what would be downloaded. It seems strange the it knows the version number when I can't find the programs.
View 2 Replies View Relatedmy media center remote will not change the volume of my computer anymore , also the volume buttons on my keyboard also do not work. i am fairly certain the a registry error or a service or policy error, but i am lost as how to re-enable them. the remote works fine otherwise and so does the keyboard.windows 7 x64 i5-2310 12 gig ram remote model number 1039 keyboard Microsoft wireless 6000 system is fully up to date.
View 1 Replies View RelatedHow to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies View RelatedI'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies View RelatedI have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
View 7 Replies View RelatedMy computer wakes from hibernation.I�m using windows 7 x64. My BIOS doesn�t support any configuration settings about wake, and the LAN device driver states that it doesn�t support wake on LAN.It�s a Dell Lattitude laptop, about 2 years old.No events are relevant.This started about 6 months ago when I went out and updated all my drivers, so some driver is apparently having fun. I had already run for long enough when it started that I didn�t want to roll back, although I have tried earlier versions of the LAN, WAN and WLAN drivers. None of them have an option for disabling wake on LAN that can be checked.
C:>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count � 0
C:>powercfg -devicequery wake_armed
gives no output.
My computer occasionally wakes up from Standby. I have a USB-based KVM switcher providing mouse and keyboard. When I want to put it in Standby, I first switch the switcher to my other computer, then I go into Standby by pressing the power button. When I want to use the computer again, I first switch the switcher back to the computer, then press the power button. Waking up from Standby spontaneously is not a major problem, as it is set to go back to Standby after several minutes. But I'm curious as to what might be happening.
View 4 Replies View RelatedI am having a most unusual problem where my system wakes itself from sleep when I walk by.. Sometimes randomly also but most times when I walk over to my desk it will wake by itself for no reason. This is quite annoying and i would greatly appreciate any help in identifying the cause.
View 18 Replies View Relatedwhen I wake up my computer from sleep, it will turn on (all of the fans and lights start running) but there is nothing displayed on either of my monitors.I have my hard drive set to "never turn off" and this hasn't helped the problem.
View 9 Replies View RelatedI've got a pretty regular and predictable usage pattern with my computer - quick logon in the morning to check emails, go to work, use computer at night, restart before bed.The computer is set to sleep after three hours of inactivity. So in the morning it will be sleeping, then when I get home from work same thing. Sometimes not; never figured what wakes the computer, but 90% of the time, that's how that works - it sleeps after three hours, and stays sleeping for several hours.However, this week I noticed that the computer seemingly never sleeps. It's always on when I come by it, including in the morning, and when I get home from work.Checked the system log in the event viewer for events 1 (wakeup) and 42(sleep), and I noticed that, into the morning of 9/16, the normal pattern of several hours of sleep was adhered to. Since 9/16 though, every sleep period lasts about 2 1/2 minutes. That is, it goes to sleep (event 42), and then within 2-3 minutes, it will wake up (event 1).There have been no Windows updates in that time that would affect this. Definition updates for Windows Defender on 9/18 and 9/21, and KB2744842 (security update for IE 9 on x64 systems) on 9/22, but nothing happened, including no new software installations, on 9/15 or 9/16.So why is my computer suddenly waking from sleep almost immediately?
View 9 Replies View RelatedI'm positive that I'm not bumping into the mouse or anything to accidentally wake it as I make sure to turn my wireless mouse off once I've finished a session on the computer. and often times the computer will wake in the middle of the night. I will select sleep mode before going to bed and when I wake up it will be running like normal
View 4 Replies View RelatedThis has been an ongoing issue with my computer only waking from sleep half the time. The other half I need to actually power cycle my machine in order for it to wake. I know when it is going to wake properly because I hear the DAC on my Asus Xonar Essence STX Sound Card click on and if it's not going to work obviously I don't hear the click.I have tried the following:
- Complete system rebuild with new hard drives, reinstall of windows
- All drivers updated and bios updated (I have been through a fair few driver updates because this has been an issue for over a year)
- New Memory installed
- Played with as many power settings in the bios as possible
I am really starting to think it is a hardware issue with either my motherboard or video card but don't have a spare of each of these and don't want to buy new stuff just to test it.
Here are my Specs:
Motherboard: Asus P8Z68-V Pro
CPU: Intel i7 2600
Video Card: Gigabyte 6950 (in eyefinity with 3 Monitors)
Sound Card: Asus Xonar Essence STX
HDD: 2 x 240GB Sandisk Extreme SSD (Raid0)
Memory: Kingston Hyper X 4x4GB (16GB Total)
PSU: Seasonic X Series 750w
Monitors: Samsung MD230x3 (3x23") 2 connected via DVI and 1 via DisplayPort
As mentioned the hard drives and memory were replaced so it can't be either of those. Also it can't be any settings because it does wake via my keyboard/mouse half the time. It is also hard to troubleshoot as it may work 3 times ok and even wake form sleep overnight but then I could leave it for 30 mins come back and it won't wake that time, there is no pattern that I can make out, not sure what else I can do to troubleshoot this but it is really annoying as my computer gets a lot of use and would rather put it to sleep than continually turn it off and on.
I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to Windows 7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was spamming the power button. I have tried searching for answers, and one solution I have tried was the "network card activity problem". However, it didn't work.
View 9 Replies View Relatedi thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
I have also recently been experiencing random shut downs during hibernate. I don't even realize it has happened until I go to wake up my computer.
Windows 7 Home Premium, x64
Gateway FX6840
Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz
I use win 7 home premiun and everytime my computer wakes up from sleep my the taskbar stays stuck for 1-2 minutes. I have downloaded a a program called process explorer to see what is running in windows explorer. I used a option in process explorer called kill the process on the programs that are running but it doesn't do anything.
View 5 Replies View RelatedI have a different sort of problem with grouping.
See, I'm a game modder, and this requires me to have many folders open at once. The problem is, when my computer goes to sleep and then wakes up, the order of my folders on the taskbar is changed. This bugs me to no end, and I'm wondering how I can stop this reordering from happening.
When I open Windows Media Center - Internet TV is listed.On the windows website it shows that I should have that option.So, I assume I don't have something set up right.I have a TV tuner and I can record and watch TV just can't get to see the Internet TV channels.
View 1 Replies View RelatedI am running Windows 7 on a new computer with no TV tuner. I am unable to see Internet TV or Netflix in Windows Media Center. When I try the automatic download (Download Now) option, I get an error message that the Guide cannot be downloaded.After looking at these message boards, I have tried turning off my firewall before downloading and tried adding the Media Center programs to the allowed programs in my firewall application, but I still get the same errors.
View 3 Replies View RelatedI am building a Media Center PC. I have two questions relating to Windows Media Center:
1) I can watch TV via TV card, but can I watch TV from another source such as HDMI or AV from my satalite reciever or PS3?
2) Can WMC work with a dual monitor graphics card? I would like to transmit the media center screen via AV to monitors & speakers, while being able to use the PC for other use via VGA connection.
I used to run media centre wired and it worked fine. Trying to clean up cables running all over the place Ive tried wirelessly yet its almost to the point that it doesnt work at all as its incredibly slow and takes about a minute to react to controller input.Im running a TP-LINKTD-W8930N 300Mbps router.
View 3 Replies View RelatedI'm having trouble combining PowerDVD9 x 7MC when I play my Blu-rays from the driver, crashes, excessive delay to load the movie, etc
When I use PDVD outside of 7MC everything works perfect.
I wonder if I can put a call to PDVD on the media center menu to have it working outside of MC.
is it possible?
in Win 7 Ultimate I insert a DVD, and the only options for playback are Windows Media Player and Real Player - with Vista, I used to have an option to play the DVD in Windows Media Center, which is what I want. Is there a way to get this option back?
View 6 Replies View RelatedAfter downloading some media software she has changed a setting so that media center opens for every program.
I have tried the steps of turning windows features on and off but when i click the link media center opens again!
I have installed Windows 7 Professional on my laptop and it has Media Center. But I can't see any way to access Netflix. Is Netflix support available on Windows 7 Media Center?
View 7 Replies View RelatedNetfix is shutting down Media Center when we try to watch a movie. It was working fine but this morning every time we try to access Netfix we get an error saying Media Center shutting down and restarting?
View 2 Replies View RelatedHave a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
View 3 Replies View Related