Windows 7 Home Premium: I want my PC to sleep after 20 minutes, so I can leave it on all night and come back in the morning and start using it right away. ( I have a password, so no one could steal it or anything, and start using it )
I have a screen saver setup to come on after 5 minutes, and sleep mode after 20.
I have it on a APC UPS set with their software, to silent, so if the power goes out overnight ( very rare and usually short ) it won't beep and wake me up. Besides, if it's asleep, it could literally go for days without power line power.
My problem is not remembering sometimes, because I come in half asleep when I wake up, and see a black screen, then reach over and hit the UPS button, not realizing I'm turning it OFF instead of ON!
But is there a way to set Windows up so that it DOES go to sleep after 20 minutes, but some kind of minimal screen saver keeps going on the screen, so I KNOW it's in sleep mode and not off?
I use the Mystify screen saver anyway, which is pretty minimal, so if that could be kept on while the Hard Drive and everything else that uses power and ages the electronics sleeps, that would be great.
Does anyone know what folder holds the screen saver options when you click Windows 7 Pro screen saver in that option when you right click the nesk top and choose personalize.
Dual Monitors reset when Screensaver/sleep/reboot/hibernate & Returning to single monitor cause a hissy fit tantrum by win 7
I have a problem with Windows 7 and my dual monitors setup. I have 2 SyncMaster 245T monitors, connected via DVI cable to a NVIDIA GeForce 7900 GTX card. I have downloaded the latest drivers from Nvidia for the card, but I am experiencing a fairly regular issue with regards to running Dual monitor setup.
When ever the system goes in to sleep/hivernation mode for more than a few minutes, upon restarting, the second monitor is no longer on. I have to physically go into settings and extend my monitor again. Simply rebooting the computer reboots it back up on only the one monitor. I have noticed twice now that this also has occurred when the computer went into screen saver mode too.
Additionally a freakish thing I found happens when I was trying to isolate the trigger of this problem is that, when I turn off the power to the 2 monitor (Not mains, just the switch on the second monitor. So mains power is still supplied) windows 7 has a major hissy fit.
It repeatedly sound the audio cue for disconnecting hardware, while the one monitor left on, constantly flickers, in what seams an attempt to return to one monitor. Only returning the monitor back on would stop the unsuccessfully attempt to return to the one monitor.
I have tried to look for anyone else with similar problems on the net, and apologize if a similar problem has already been posted here, but my search revealed nothing. I was wondering if anyone knew of a fix, or has had similar issue that they resolved.
From Windows 7 logon screen how to run screen saver slide show. Try the hack here but it didn't work I have a lab of 30 systems and try it again on another two systems but it didn't work. I'm runing Windows 7 64Bit.
I have been having issues with my screen saver. No matter what the time I set it for it will not turn on. When I test it, it works just fine. I also have the computer set to turn off the monitor after a set time and that too is not happening. I was noticing that when ever there were updates to be installed that it wouldn't go to screen saver but there are no updates to be installed right now. I do not have a wireless mouse or keyboard everything is via USB.
My linkMy screen goes black after 5-10 minutes of being idle. sometimes when I return, and especially if it's been a long while (an hour or more), my computer runs slowly and/or I've lost my internet connection. I then restart and all is okay again. any know how to fix this? This is a netbook running Windows 7.
i use photos as my screen saver but because im using 2 monitors when the screen saver starts it puts the pics in the middle of both monitors, is there a way of having one of the monitors go into sleep and the screen saver displayed on just one monitor? im sure ive seen the setting somewhere.
First, I do *not* have a wireless mouse. I read lots of posts about wireless mice preventing screensaver from coming on, but I have a wired mouse and wired keyboard.
I have a brand new computer. It is an HP Compaq Pro 6300. I run Windows 7 Pro.My screen saver and my power settings never kick in. I have searched the internet for answers. Nothing I tried has helped. I had a session with HP tech support, they couldn't figure it out.
Not sure if this is a WMC/Windows 7 issue or a TV issue.
I have an HTPC hooked up to a TV via an HDMI matrix. When I run the screensave (photo gallery) on my WMC I lose the signal to the TV very 20-25 minutes. I know this as I get a "No Signal" message. When I click on the keyboard the signal resets. This does not occur if I am watching a movie in WMC. Only when the screen save is running.
I don't seem to get this when I run the screen saver (photo gallery) on Apple TV through the same TV. It plays indefinately.
Is there a setting in WMC that turns off the screen saver slide show? Or is this a problem with my TV/Signal?
My screen saver is not functioning. I get a black screen saying "Windows could not start this screen saver".
When I try to adjust the settings it says "no preview available". I have changed no settings to make this occur.
I am using the original screen saver that came with the OS and attempting to use 'Bubbles". I have had this PC for 2 years and have been using Google Chrome for the last 2 months.
My screen saver will not come on and the monitor is not turning off, even though I've set it using the advanced power settings. Also, when I put the computer into Hibernate mode, it always turns itself back on, usually in the middle of the night.
I was just sitting there doing nothing but just watching my screens (live financial charts) when all of a sudden the screen saver (I have "Mystify" setup) trying to start because I did not touch the keyboard and mouse for a few minutes. Then 2 of the 4 screen went blank and the remaining 2 froze and just gave me BSoD. This BSoD is not the first one and I suspect the screen saver is missing some files, etc. or Windows is corrupted. I think all my drivers are updated (with SlimDriver freeware). This time, the BSoD - as I recall it had a IRQL_. message at the top.
I use the picturers folder to display as my screen saver. In Windows XP I could control the dispaly speed of the pictures. In Windows 7 the three settings of Fast, Medium, and Slow are too fast. In the changing pictures option of SLOW it is still too fast to enjoy each picture.
My system Froze up and went to a black screen; upon reboot it wouldn't get past the BIOS load screen. I reset the CMOS and now everything works fine except an issue with the photo screen saver. The other screen savers work, but the photo screen saver will not. When I try to go into settings with the photos screen saver selected it looks like it loads something but nothing pops up, and then the screen saver window becomes unusable. It doesn't freeze but it acts like there is a second dialog box open and it's waiting for you to finish with that dialog box (if you know what I mean). I can't preview with photos selected either, but it doesn't become unusable.
I have a photoscreensaver error that reads as follows:
Photoscreensaver.scr Entry Point Not Found
The procedure entry point DwmHintDxUpdate could not be located in the dynamic link library USER32.dll
It comes on when the screensaver starts, I have go no screen saver organised, the screen just goes black, then when I move the mouse the black screen goes and the above is in a box. It is possibly related to a rolling wallpaper I am using from my photos folder.
I am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
Followed "Help" instructions and screen saver will not turn on after the designated 10 minutes for "display" to turn off. PC just goes in to power save mode.
I am running 2 monitors on my tv and second monitor in my living room. On the second monitor set up, which has a wenbcam set up through wineows explorer. The problem arises when my screen saver kicks in. It tuen my main monitor into a cool photo albub, but it also takes the second monitor offline. What I wantr is the screen savor only on the main monitor, and the second monitor to continue to show the webcam.
I did a system recovery and now I can't remember what it was that I "fixed" before to solve the "screensaver won't activate" problem. I know it was simple and I think it had something to do with msconfig.
I like to use My Pictures for my screensaver. In Vista I found I had many different options in the settings box (B&W, fade transition etc).Although I am using the same graphic card and driver I no longer have these options.Is this Windows 7 or have I perhaps got something wrong?
I face some issue about our Windows 7 installation by WDS. We try to active Screen Saver by script during the installation process. But what we se is about the fact that the screen saver is active after the installation for Administrator, but is not active for the basic users in the domain[CODE]
Screensaver wont start automatically.I just reinstall Window 7 64-bit Professional.Everything appeared to be working until I did window update. Any clues?
