I run win 7 sp1 on dell inspiron 1520.Wenn i open some programs or games, there are two black parts at the right and the left of the screen.I have also uptated all my drivers using widows update and also drivers genius professional.wenn i was running xp, there wasn t this problem.here are the screen shots
View 6 RepliesWenn i open some programs or games, there are two black parts at the right and the left of the screen.I have also uptated all my drivers using widows update and also drivers genius professional.
View 5 Replies View RelatedNFS is no playing in full screen. There is black space for about 1 inch on both sides of the screen vertically.
View 4 Replies View Relatedi am using dell studio 1737 and windows 7 x64.with latest driver obtained from dell site.cuz i could not find it on intel site.it has intel GMA 4500MHD.
anyhow my problem is,i am using doom3 and on MS compatibility site it says,that it is compatible with windows7 but it does not run in full screen,it always runs in short mode,from vertical angle it runs in full length but in horizantal,it leaves border on both left and right side,almost an inch.
i searched for it lots and found that i must check my intel vga main settings panel to allow it use full screen which i have attached with,the screenshot.it is using full screen mode,but it is not using full screen,
i installed vista on my drive D.and in it,it used full screen resolution.
i am running windows7 ultimate x64 but my problem is,that when i run doom3,it does not come in full screen,it has 1inch border left from both left side and right side...it does never come on full screen.i even changed option to use high resolution,full screen but it didn't solve problem,then somewhere on net i read,hit alt+enter,i did this too.but still problem didn't solve.
i am using dell studio laptop 1737,and it has intel GMA 4500MHD vga,i hav downloaded the driver which is latest for it even for windows 7 (from dell...i couldn't find it on intel)
lately i installed NFS most wanted,then NFS carbon..both had same problem as doom3.they are not using full screen.but in my intel vga properties,it says that it is using full screen.i have attached the image of my vga panel.
It wont run in full screen always in middle. I tried messing with game options but it doesn't work for all games, I really need this fixed. I am using Radeon HD 5470. Windows 7 intel core i5 4gb ddr3 rams.
View 14 Replies View RelatedI got two monitors and marked dual monitor. When I put full screen sometimes that program goes to second monitor sometimes on main monitor. I got windows 7 64bit also. When I put full screen program on second monitor the wallpaper is getting low..I will post screenshots. First one is when I run a game for example and second, normal working
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Dual Core Processor 5200B, AMD64 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 9500 GT, 512 Mb
Hard Drives: C: Total - 102822 MB, Free - 27891 MB; D: Total - 166823 MB, Free - 126027 MB; I: Total - 17500 MB, Free - 13213 MB;
Motherboard: ASUSTeK Computer INC., M2N-MX SE Plus, Rev x.xx, MF7088G00711457
Antivirus: AntiVir Desktop, Updated and Enabled
When I open any window maximised, the taskbar is hid behind. The super key does return the taskbar until the window is made active again. The windows also take up full vertical space on the screen - no space is left for the taskbar, which I think maybe the real problem.
View 13 Replies View RelatedI am supposed to run an old DOS program on my Windows 7 OS. But when I try to run i get the message c:winndowssystem32cmd.exe This system does not support fullscreen mode. Choose 'Close' to terminate the application.
I tried to change the compatibility mode of the application, which starts by a PIF file by the way, tried to run it in windows mode. But It simply wont work. I dont want to run it in XP virtual mode.
every ten to fifteen minutes, whether i be watching a full-screen video from Internet or playing a video game, my window gets minimized back to the desktop. i've been experiencing this problem for a few months now. i've tried searching to see if anyone else has had similar problems, but none of the solutions i've found (uninstalling avg, no screen saver) have done anything for me. i took a screenshot of the processes running in my task manage
View 3 Replies View RelatedI love ObjectDock and I love the taskbar too.I made the taskbar autohide but..When I maximize any programs it will occupy full screen, can I maximize a program but it will not occupy full screen? What I mean is.. it will maximize AS IF the taskbar is not hidden.Very annoying when I try to click on the minimize, maximize, close etc.. as the autohide will appear when I move over my mouse. Or maybe I can set the delay for the taskbar to appear?
View 1 Replies View RelatedIve got a dell mini running windows 7. Some of the windows wont appear in their full size on my screen. for example, on open office org, I have a document that needs recovering, and every time i open the program the window pops up. i cant get to the ok button though, because the full window doesn't appear on my screen size.
View 4 Replies View RelatedWhen I'm minimizing a full screen video-game, I can't re-open it. This problem appear on all my video game but not with my Internet browser or other programs who are not full screen. I have not changed anything on my computer and this problem has appeared today. I tried ALT - TAB and it doesn't work too. Each time I'm minimizing my full screen game to check my desktop or something... I need to close completely et re-start it.
View 2 Replies View Relatedi have owned asus gaming tier pc for 2-3 months, and this problem came up. I do not know what to do. Do i need to post some information? And some times during the crash, pc losts connection to internet. It's getting really annoying, since i'm tf2 Trader.
EDIT: Now it's doing it constantly, and after some time, mouse and keyboard wont respond.also, when the crash starts, it sounds like usb being plugged in.
Full screen game will full screen when I use Vista and XP. When I use Seven, the side will become dark.
But when I use fraps to take screenshot, it appears to be full screen image. So, i have to draw it out. Any idea?
As I shutdown/restart my laptop, I notice it switches to a secondary desktop that has been running programs.A good example would be trying to open my Task Manager, I can Ctrl-Alt-Del and it will allow me to open Task Manager - however when I click on Task Manager, it opens on the Desktop running in the background. I can't even access the Desktop in the background, it only shows up as I'm shutting down - closing programs that I tried opening awhile ago.
View 7 Replies View Related'm a 3D artist, and I'm currently rendering out a whole load of frames. I'm using a reasonable, Sony Vaio laptop for the task, which has an Intel i7-720QM, however I'd like to know what CPU speed it's currently operating at.I know that it says it runs at 1.6Ghz as standard but then can ramp up to 2.8Ghz, I just wondered if it truly was going at that speed whilst it's rendering.
View 9 Replies View RelatedMy screen displays in Box projection not full screen after downloading windows 7 - how can I get the graphoics to fit the full screen please
View 3 Replies View RelatedIt is running at 1300MHz constantly and it is suppose to run at 1600MHz, any reason why? Specs at bottom.
View 5 Replies View RelatedI m running Windows 7 ultimate x64 on 6 pcs. All connected with cat6 cable to Gigabit Ethernet 8 port switch. Most of the PC have Realtek 8111F, 1 x Gigabit LAN Controller on board (1 or 2 have intel pro giga)
Now question is what settings should i make so that my all pcs can use full available bandwidth/data speed ?
(lan card properties have many settings in advanced tab such as ..packet size,link speed,buffer etc.)
Yesterday I installed RC1 of Windows 7 on my HP 6910p. After install I immediately noticed that the notebook makes much more fan noise then under Windows XP.
The fan seems to be running constantly and whenever I seem to do something a bit graphical it goes at full speed.
Are there any other (HP 6910p) users that have the same experience?
Is there something I can do / tweak to make my notebook quite again.
I have already disabled the superfetch however this only reduces the HDD activity.
my widows 7 pro 64 bit seems to only be runningthe 32 bit programs for some reason, it did this a couple of monthsago, so i restored to an earlier time, this sorted it out, now i have triedto do the same and the only restore point is from yesterday 26.07.2012no dates exists before this, i am thinking part of window has been orruptedor something maybe a virus
View 7 Replies View RelatedI have a photoshop software called Microsoft Picture It! Publishing on my old laptop that runs on XP, yet when I try to run it on Windows, nothing runs.....It there anyways that I can get this program on Windows 7?
View 7 Replies View RelatedAfter two months of no problems, no programs like IE or Windows explorer will run...instead I'm ask to choose a program to open with. If I go to the same program and click run as administrator, everything works fine.The paths are OK, and sometimes the error is explorer.exe not found, but the exe is in the ....System32 directory.I did do several virus scans, but had no serious hits and all the minor items were removed
View 2 Replies View RelatedI have a 32 bit 2010 Office Home and Student version loaded on a 64 bit Windows 7 Home Premium version. I received a 32 bit VBA Excel program that will open fine, but when I enable macros I get the VBA message: Compile error in hidden module: modtimebomb. I'm told this 32 bit VBA Excel program works fine when running on a 32 bit windows system. Would this be a problem with the VBA programming or is there a problem with running certain 32 bit excel programs on a 64 bit windows system?
View 2 Replies View RelatedI want to be able to restart Windows, by choice, either without startup programs running, or with startup programs running. The reason is that I have an old (~2001) Palm m105 PDA handheld that updates using Palm HotSync Manager via a USB/serial port cradle (Serial Port 6). It works very well and I don't have a need to replace it with something more up to date, but the problem is, when I try to run the hotsync while other programs are running, I get a Windows BSOD at some point before the hotsync finishes, I have to reboot every time, and the hotsync never finishes. However, I find that if I shut down almost every optional running program before running the hotsync, then I can run the hotsync to completion without the BSOD happening. As a workaround, to simplify things, I figure that when I'm ready to run the hotsync, if I reboot Windows to a state where no applications are running, I can run the hotsync and then reboot Windows back to its normal startup state, with all the normal startup programs running. This all seems very labor and time intensive regardless of how I do it.One way I thought of doing this more cleanly (though probably not saving any time) is to create another user account, with no startup programs, and run the hotsync from there, and switch between the two.
View 14 Replies View RelatedI've been getting a BSOD whenever I run a MSE full scan, it runs for a couple of hours and then crashes.sorry, the PassMark RAMMon wouldn't attach as an html file)
View 9 Replies View RelatedI have a computer based training program that is designed to run on older Windows versions. The last version that I had it working on was XP. I am trying to get it to run on my new Windows 7 machine, with no luck. Windows has a patch to run XP programs, but it is not available for my home version of Windows.
View 16 Replies View RelatedI am about to install Windows 7 64 bit on a new-build PC, so it will be a new install and on a new formatted hard drive. I have three other hard drives on which all the program and other files were created under Vista 32 bit. I know I can transfer the files which are installed on my Vista boot hard drive using Windows Easy Transfer, but when I am running Windows 7 will it recognise all the programs and files on the existing drives if I just leave them there?
View 1 Replies View Relatedthis is really annoying when playing a game as it causes the game to drop out and go back to the desktop. it also does it when watching a Internet video on full screen or watching a video in windows media player blocking the controls and being generally unsightly in both cases.
i don't want the taskbar gone completely, i just don't want it interfering when i'm not using the blasted thing!
I have a friend who has upgraded to Windows 7 on a 64 bit machine. He has some old Basic programs, including source code, for useful engineering calculations. These programs no longer work on his machine.
Neither of us are full time developers or PC experts so a user-friendly solution would be best.