Plug-in SATA Cable (to Hard Disc) When Computer Is Running?
Oct 23, 2011Can I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
Can I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
Can I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.
View 2 Replies View RelatedI know, I know, I know... SATA is Hot PnP. I'm old school and finally gotten over the fear of Hot PnP USB.
I'm replacing a new Windows 7 PC for a customer and the old PC is WXP. Reason being, the old PC Pwr Supply died. Can I take the old SATA HD w/WXP on it and just plug it into a SATA port on the new PC while it's running to copy files from it (safely).
And can I facilitate a Files and Settings Transfer WXP-to-Windows 7 in this manner?
I plug in a LAN cable to my laptop but apparently Win 7 can't detect it. However it does detect the wireless connect and automatically connect to it.I'm a noob when coming to Win 7 and Computer stuff.
View 5 Replies View RelatedI have a compaq tc4400 tablet. It was recently updated to word 2010 and since then it gets a black frame around the screen when I plug it into a VGA cable....I can't use the tablet feature because it won't calibrate!
View 2 Replies View Relatedake sure that when plugging into the MB, the HDD doesn't lose any data from the prior set-up? HDD-1 is the primary data drive. Shouldn't I be able to "mount" it and read the data? I am planning on moving the data to some external HDDs, reformat the HDDs and then put the user data files back in HDD-1.
View 1 Replies View Relatedi want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies View RelatedI'm trying to connect an internal, powered SATA HDD to the eSATA port on the back of my motherboard.To do this, I bought an eSATA to SATA cable.Unfortunately, no matter what I do, the drive is never detected, not even by the BIOS.So, I bought another cable. Same problem.Finally, I tried moving the drive and the cable to another computer. The HDD is not detected there either.So, either I am making the same mistake on both computers, or both cables are faulty..
View 6 Replies View Relatedi have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
I have a Router with ethernet and usb ports on it, and want to use the usb port to plug an external hard drive into it. Is this possible or is the usb port only for connecting to a PC.
View 4 Replies View RelatedLoading Windows 7 on a new computer. Trying to sort out this raid issue. Computer is :
Gigabyte GA-EP45T-Extreme
Processor : Intel Quad Q9400 LGA775
Ram : 4gb
Hard Drives : 3 x 1 Tb Seagate
Video Card : Radeon HD 4890
I've enabled the raid 5 in the BIOS. I've downloaded the driver from the Gigabyte Disc onto a flash drive. When I load Windows 7 it says " Windows cannot be installed to this disc. This computers hardware may not support booting to this disc. Ensure that the disk's controller is enabled in the computers BIOS menu". I've checked and rechecked the BIOS. I also downloaded the MSM64 Driver in the Gigabyte disc and that the one I copied to the flash drive.
I have a new gaming computer with a high end video card and plenty of RAM and a high speed cable Internet connection. I also have a HDHomeRun TV cable unit which is listed to work with MS Media Center. When I set up my Media Center/TV connection it recognizes my HDHomeRun TV connection and all three TV channels via my MCard I got from Comcast cable. But next to the last dialog window, during setting up my TV connection, I got the following message, "Your computer is not digital cable ready. You will not be able to set it up for use with a cable card."
View 4 Replies View RelatedI had to do a fresh reinstall today and I wanted to know if I should download and install any of the drivers (other than Ethernet LAN to get me online) for my comp'?In particular, the SATA drivers for a 64-bit install
http://ca.gigabyte.com/products/pr [...] l=1#driver,I do have to install the audio and video, but otherwise, not sure about the SATA.
My SSD main drive is running low on space .My motherboard supports 2, SATA3 connections.My current drives are SATA2 SSD main drive and a SATA3 1TB media drive.If I were to add 2 SATA3 SSD's in RAID, does that use up both the SATA3 ports on the motherboard? or do they just combine and use 1?
View 1 Replies View Relatedwhenever i plug in an audio device the computer crashes
View 1 Replies View RelatedI can't get the USB cable on my printer to go into my USB porton my computer
View 7 Replies View RelatedMy computer does not recognize my WD1200B015-RNN external drive when I plug it in to the usb port. I now have windows 7. It previously worked on Vista?
View 1 Replies View RelatedThe problem I'm having is that whenever i restart my computer or shut it down for a while and reboot my system a System disc check occurs.
It's telling me that there are no problems but this disc check keeps occurring.
Any suggestions to what I should do?
I have a Gigabyte 870-UD3 motherboard and I also have two hard drives, One is a TB and the other is 500GBs, The TB one is the primary one at the minute and I was wondering does it matter what way my hard drives are connected to the motherboard? Will one slot make it slower or faster?
View 5 Replies View RelatedI am wanting to add a 3rd drive to my dell GX620. It has only 2 ports for SATA. Any good ideas on how to do this? Maybe convert an EIDE port?
I have a sata dvd writer, and two sata hard drives. Hoping to use them all. DVD writer is a lightscribe that's why I wanted to keep it.
My setup: XP on my C-drive with 2x SATA drives as slaves.
My requirement: I want to take my drives out and just use one of my SATA drives to install WINDOWS 7. If i tell my BIOS that my new C-Drive is that SATA drive, will i have to tell it again that my old drive is an IDE when i put that back in without the new SATA drive plugged in.
My reason: I have got the new WINDOWS 7 and want to install everything and update all my programs also have a good look and learn before i start having my work on it. It is easier for me to just unplug the power leads on each drive before i start then to have to redo all my work if i mess WINDOWS 7 up and have to format. I cant afford to loose everything.
Yes i could back everything up but i need to work while this is happening if you know what i mean.
i HAVE TO GET THE INFORMATION ROM MY OLD COMPUTER TO A "CLEAN' USED COMPUTER. IT HAS BEEN SETUP FOR WINDOWS 7. bECAUSE OF MY WIFES SURGERIES AND THE UPCOMING ONE, WE HAVE TO DO IT OURSELVES. I HAVE A ETHERNET CABLE TO GO FRON COMPUTER TO COMPUTER, BUT THATS IT. I WAS HOPING TO PRINT OUT THE DIRECTIONS AND DO IT MYSELF.
View 5 Replies View RelatedI am currently running Ubuntu 11.04 on my HP (DV5 1110em) laptop from an external USB 2 Buffalo ministation hard drive, I have noticed my machine is equipped with an E-SATA port. Would using an e-sata external hard drive be any faster that the usb option ?.
View 3 Replies View RelatedI am trying to install windows 7 for a friend but the hard drive isn't detected within windows setup or within the bios. I have tried installing SATA drivers to try and get windows to recognise the hard drive but to no avail. Is there anything else I can try before assuming that the hard drive may be faulty?
View 2 Replies View RelatedMy SATA hard drive has three connectors, power, SATA and to the right is an additional male four pin connector. What connects to that connector?
View 16 Replies View RelatedI am having trouble connecting to internet with a hard wire cable but the wireless works just fine. Is this problem in my security settings ?
View 3 Replies View RelatedI have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
View 3 Replies View RelatedI recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.
It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.
I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?
I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?
How to Install and Setup a SATA Hard Drive ?
View 0 Replies View Related