The problem I'm having is that whenever i restart my computer or shut it down for a while and reboot my system a System disc check occurs.
It's telling me that there are no problems but this disc check keeps occurring.
Any suggestions to what I should do?
How can I find out what speed my cpu is working at?
View 2 Replies View RelatedMy computer freezes during a virus scan, defrag, disc check, etc. I have to manually shut down. Does it even in safe mode. Windows7 64 bit. Operates perfect otherwise.
View 2 Replies View RelatedOld post, look for more info. Okay, boopme directed me to here, how do I preform a system file check without a windows 7 install disc handy? I have oem, so is all the win7 computers on my property, am I sunk?
View 14 Replies View RelatedI went through my first attempt at building my own computer about 2 months ago and the process went fine. But about a week after I began using it, I started getting BSOD that seemed happen whenever I would run a CPU intensive program (Handbrake, VMWare Player, etc). It won't always crash when running one of these, but maybe once every couple of days when running a program such as this.I've tried the following after researching online: Ran memtest86 overnight, no errors found in RAM Put in a beefier CPU cooler (ZALMAN CNPS9500A-LED 92mm 2 Ball CPU Cooler) to lower the CPU temps Reinstalled to a fresh version of Windows 7 Ran 'verifier.exe' according to the steps shown in many posts here - the result of this is that about 30-60 seconds after I login to Windows, a BSOD occurs - this is repeatable every time until I cancel the verifier program The specs of this computer are as follows: Intel Core i7 3770 processor Microsoft Windows 7 Professional x64 Antec BP550 Plus 550W Continuous Power ATX12V V2.2 80 PLUS Certified Modular Active PFC Power Supply G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-16GBXL ASUS Sabertooth Z77 LGA 1155 Intel Z77 HDMI SATA 6Gb/z USB 3.0 ATX Intel Motherboard NVIDIA GTX GeForce 550ti (installed AFTER the BSOD started occurring) Crucial M4 2.5" 64 GB SATA III Internal SSD Seagate 300 GB HDD (don't have the exact model here) ASUS 24x DVD-RW ?
View 9 Replies View RelatedRan a full scan on my computer with PC Tools Spyware doctor with antivirus
Running an HP G62 Notebook
Processor: AMD Athelon II P320 Dual Core
OS: Windows 7 Home Premium 64 bit
MB : ASPI x64-based PC
Can I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies View RelatedI have a Toshiba Satellite and when I launch recovery options while starting it up it goes extremely slow. If I launch it with a repair disc it still goes extremely slow. ATM, I've put the repair disc and now im just waiting to see what happens.
View 3 Replies View RelatedI have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies View RelatedAuto check comes up 4 times right after windows7 starts up. But will continue to boot normally. BEreg Query comes up with this.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
BootExecute REG_MULTI_SZ autocheck "autocheck ""autocheck autochk *"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck
[code]....
Have 1 SSD drive for OS /C No partions and one HDD/D with 2 partions with acronis backup on one the other is clean.
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedI have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies View RelatedI installed Windows 7 RC1 (7100) 64 bit on my wifes' Dell inspiron 1525 laptop.
Every was fine and dandy until my wife hit the "media direct" button instead of the power button to start the Laptop.
Now it just keeps on rebooting over and over....
Is there a way to stop it from trying to load media direct, of fix-it so it loads it correctly then be able to shut it down ?
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedIs there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
View 6 Replies View RelatedWindows 7 is rebooting , sometimes once acuople of days or could be once an hour but always when im away. the reboot is clean and i get the normal windows screenhat could be the reason? there are no any usb atachments and comp is quite new.
View 2 Replies View RelatedSo I was on the internet when my computer close out of everything, and just shuts down. I my head I was saying, oh is it rebooting, android sdk unpacked fast(its a program that lets me play games and apps on windows). So as the computer restarted it went to a black screen with a blinking course And after 10-15seconds it restarts, just to starts the whole process over again. So I used my phone to get on the internet to check how to fix it, saying "oh man what is wrong, a virus maybe?" I seen some threads on different site with answers saying to to reboot in safemode using f8 and ... so and so. So I did it. nothing happened. So i held it, nothing. ( it just doesn't work) so now im stuck. With a rebooting computer. what to do now? I also heard a bout a error r something. It just reboots it there is a error, I don't know.
View 2 Replies View RelatedI have win 7 Ultimate, and every time I reboot win, lot of devices became unusable with "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)". I have to do troubleshoot of my notebook (in "Devices and Printers") and then almost all device with error 24 is uninstalled/installed and after that it is working fine. There are some devices
(e.g. Hamachi Network Interface, VMware Virtual Eth Adapter) which are not healed with notebook troubleshoot. Those devices can't be found in "Network Connections", but they are working fine.
Does anybody have a clue? (this is really irritating to reinstall all devices after every reboot)
Last night, I forced shut down my laptop, holding the power button. Now it won't load Windows at all. It turns on, the IBM thing comes on, it's a blank screen with a __ at the top right that's blinking. Then it restarts, and the process starts all over again. I have forced shut down my laptop a lot of times, bit this the first time this ever happened.
View 9 Replies View Relatedmy computer restarts without any pattern/reason that i could think off.
This has been going on generally for months.
This is a new computer that was bought in the end of September and it came with this problem when I bought it.
Was bought with windows xp, which was upgraded to vista and then to windows 7.
None of the operating system upgrades helped, but for a few months changing the graphics card did.
A few weeks back the restarts started again and just changing the graphic card this time didn't help. It went as bad as restarting once per minute. PER MINUTE.
The automatic restarts have been turned off.
This computer has been to the repairs more then my old one did in 5 years.
The next thing we will change is the motherboard.
Computer hasn't restarted in a hour so far, but each time I try to call someone on skype it ...lets me be on the call for a few minutes... and then restarts.
It restarts when I try to play world of warcraft, movies and what not. It sounds like the graphic card, but it's not. That's just today.
It started all over again a few weeks ago, then my dear repair guy reinstalled some drivers and it worked for a week. System restores don't work, but it doesn't make me stop trying.
I have ran every possible virus scan I can think of.
Reinstalled every program.
All kinds of system repairs.
I'm down to thinking it's either the power or system updates.
This is a rain of terror and It doesn't have a pattern.
I am trying to install Windows 7. I put in the DVD and the installation starts. It expands the windows files then says it needs to reboot. It reboots and goes through the whole process again, says it needs to reboot and it keeps going in circles. I did this three times with the same results. I tried rebooting from the hard drive with the DVD not in the drive and nothing happened.
What is going on?
I have a dell optiplex 360 that is running windows 7. I added a video card geforce 7950 gt, at the time when I added this the computer was running fine for months. Then I upgraded the power supply to a raidmax rx730ss because the video card needed the 6 pin power supply that the old psu didn't have. After I installed the new PSU the computer would start running the post (dell logo screen) finish the load bar, go to a black screen then reboot and start running post again. the computer does this indefinitely as far as I can tell.I installed the old power supply and it did the exact same thing.
View 1 Replies View RelatedI recently downloaded Microsoft Security Essentials and now I think I have some sort of virus. Within minutes of logging onto my computer, a message keeps popping up that there is a critical error and that the computer will restart within one minute. I have tried to do anything I possibly can to get rid of this issue! It does the same thing while booting up in safemode as well. I also tried to restore my computer to a previous date before this occurred, and it still keeps happening. I figured i'd try to restore it to factory settings also, but it does not give me the option while booting up (f11), or on my control panel. I also tried using the TDSSkiller but my computer reboots before the scanning/fixing finishes.
View 3 Replies View RelatedMy Asus G73JH laptop [Windows 7 Home Premium 64 bit] is about 2.5 years old and the other day it began suddenly freezing and rebooting. What I mean by that is the following: A) When it freezes, there is no warning, no gradual slow down, no anything. The mouse instantly refuses to respond, the computer makes no "thinking" internal noises, nothing. I'm forced to hard reboot. When it reboots itself, it is also instantly. There is no gradual closing of programs, it's just SHABANG. This became an issue suddenly. One day it was fine, the next it was doing this unpredictably.So I decided to go ahead and reformat the thing and re-installed everything via the Asus-provided "AI Recovery Burner" program.Annnd it's still having the same problems. Not only did I experience several errors when trying to do the million and one Windows updates, but it's still freezing and rebooting. Even in safe mode, it freezes. The timing of these things is unpredictable, it could happen 2 minutes after boot-up or, the computer could run fine for hours. So far, the freezing is much more common than the rebooting. Assuming the issue was hardware related, I ran Memtest86 last night for 7 iterations and it turned up zero errors.
View 1 Replies View RelatedI am facing this error after every 5-10 after restarting pc.I am attaching files created by SF Diagnostic Tool - Using for Troubleshooting..
View 1 Replies View RelatedI'm working on a NetBoot a acre aspire one and windows 7 starter loads up to the home screen but no icons are shown, nothing it just basically reloads at the windows 7 starter screen.It does have a system restore file from 9-28 but I don't want to use that unleash have to.I ran it in safe mode and the same problem, tried safe mode with networking last good configuration all the same even the dos prompt.All the same.
View 9 Replies View RelatedEverything about the install appears to be going fine, but at the last step when it says completing installation, i have problems.
It says it's going to reboot and then does. When it's starting back up, is says setup is updating the registry. Then it says setup is starting services. It restarts again and when it gets to the same spot, out of nowhere the PC reboots and gets to the same point before endless rebooting.
I tried installing both 32 and 64 bit versions but the same problem with both of them. The 32 bit version I was able to get installed just fine on 2 old XP computers my friend had, so I know the disc itself is good.
I've tried just about everything I can think of but can't get past this issue. And every attempt is a big deal because I have to then restore my PC back to the original factory condition and it takes time. I don't have another PC of my own to troubleshoot with either. I've tried raising the RAM to 4GB but that had no effect. I'm sorta a beginner so any help is greatly appreciated.
I have been trying to clean install Windows 7 ultimate (DVD is fine, have installed on my friend's laptop successfully) since last week, but with no luck. Everything is fine during the installation; I can see the welcome screen, and then shut down. After my pc restart, passes the self-testing, it would reboot right before windows logo shows up. It turns into rebooting loop stopped every time before windows logo shows up. Also tried with Sapphire HD 3650 512MB (Dual DVI) graphic card, the results were the same.
System Spec:
CPU: AMD 3200
MB: Abit NF7-S2 V1.0 (Socket A, AGP 8X)
GIC: Gainward GF6800u 256MB (Dual DVI)
Memory: Corsair PC3200 Pro 2x512 twinx
HDD: WD SATA 500GB
Monitor: Samsung SyncMaster 923nw connect with DVI-VGA adapter
I reinstalled Windows 7 from the recovery partition and everything seemed to went fine but upon rebooting, it does a "system setup" and when it finishes the desktop appears with the message like "Computer needs to reboot to finish driver installation. Do not touch mouse or touchpad." It then reboots on its own.
View 5 Replies View Relatedmy netbook will not load windows since an avg update. I am trying to reboot from a USB stick. When I f2 and choose usb hdd then save the computer just asks me to remove the device and press any key before it will go any further.
View 2 Replies View Related