I had to do a fresh reinstall today and I wanted to know if I should download and install any of the drivers (other than Ethernet LAN to get me online) for my comp'?In particular, the SATA drivers for a 64-bit install
http://ca.gigabyte.com/products/pr [...] l=1#driver,I do have to install the audio and video, but otherwise, not sure about the SATA.
I was wondering is there a way to stop that, on my pc i dont have to do that i click to install things but on a friends computer i have to right click for instance mozilla installer and run as admin how do i stop that?
View 5 Replies View RelatedMy screen goes blank every now and again but all the lights on my pc, mouse and keyboard stay on but i can't make it do anything. I have to power off and on again and sometimes when i power up i get a message of system boot failure
View 5 Replies View RelatedI just reformatted my computer because it was having problems. I want the computer to stay at a balanced power level, so I selected the 'balanced plan' where it shuts the monitor off after 10 minuted and puts the computer to sleep after 30. When the computer is put to sleep, the wifi goes out, which is a problem for me. I was wondering if I could keep certain things running while it sleeps such as the wifi and other programs that normally stay on during the day.
View 2 Replies View RelatedI assembled a new computer using:
Windows 7 64bit Pro SP1 OEM System Builder Pack
Gigabyte H77M-D3H
1TB SATA HDD WD Caviar Black
Intel Core i3 2125
DDR3 8GB 1600 Intel Viper
SATA LG Blue Ray DVDRW
Clean install of Windows reveals an error not detecting any drives, does not allow partitioning or formatting. BIOS identifies the drives.I've attempted installs of updated drivers from the motherboard's website (as well as the CD that came with the motherboard). WD claims not to have any drivers on their website. Still nothing.
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies View RelatedI clean formatted my Toshiba satellite L745d -s4230 (psk16u) with amd radeon 6520g , a6-3400 vision apu with radeon ,HD graphics 1.40 GHz4gb ramwindows 7 home premium 64-bitI played heroes of newerth on my laptop ,but after formatting it I experienced some lag in game.
View 6 Replies View RelatedI know, I know, I know... SATA is Hot PnP. I'm old school and finally gotten over the fear of Hot PnP USB.
I'm replacing a new Windows 7 PC for a customer and the old PC is WXP. Reason being, the old PC Pwr Supply died. Can I take the old SATA HD w/WXP on it and just plug it into a SATA port on the new PC while it's running to copy files from it (safely).
And can I facilitate a Files and Settings Transfer WXP-to-Windows 7 in this manner?
fter completing a Toshibe laptop checkup, the Toshiba laptop program suggested I follow certain steps to help my laptop run faster. Among many other steps, they said to delete un-neccesary files in Programs and Feautures. I did, and I thought I didn't delete anything important, but now I can't connect to my wifi. I think it might be something I deleted. How do I re-install something from Programs and Features after it's been deleted?
View 2 Replies View RelatedMy new desktop will be coming on WED and I will be giving this Laptop to my sister and mother to use. I bought it in 2009, loaded with Windows 7 and it still runs like a dream perfect for what they would use it for. I was wondering what kind of precautions can I take to limit their ability to run exe files or to install things when I'm not arround b/c there desktop is a mess.....half of the browser window is full of search engine bars....you know the drill when it comes to family computers. I'd really hate to give them laptop and see them turn it into crap.
View 1 Replies View RelatedCan I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
I did a clean install of windows 7, and things are not responding and hanging.My computer used to be a hp pavilion p71142 I kept the processor, dvd drive, ram, and hard-drive from it, but did my own build.Before I did my own build, I was having trouble with windows. It was slow and it got to the point where windows would not load/boot. I did a fresh install before I started changing hardware, but still slow.The only thing changed when my computer was hp is the graphic card and psu. But those worked fine for several months with no problems. I have got to the stage again now, where windows 7 will not load, and I can't even get into startup repair.
View 34 Replies View RelatedMy SSD main drive is running low on space .My motherboard supports 2, SATA3 connections.My current drives are SATA2 SSD main drive and a SATA3 1TB media drive.If I were to add 2 SATA3 SSD's in RAID, does that use up both the SATA3 ports on the motherboard? or do they just combine and use 1?
View 1 Replies View RelatedCan I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
Having issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies View RelatedI'm getting ready to remove Windows 7 RC and install my legit copy of Windows 7 on my PC. My version of Windows 7 is a XP Pro -> Windows 7 Pro upgrade. When I did this upgrade on my laptop, I ran into a bunch of SATA issues because Windows XP does not support SATA on the default installation disk. Needless to say, a few hours later of messing with nLite, my laptop is good to go.
I want to avoid this mess with my PC and already be prepared. I'm trying to figure out what SATA drivers I need to use with nLite for my main PC. Is there somewhere I can go to get this information? Are the drivers based off my motherboard? CPU? Hard drive? Not sure where to start. My laptop's SATA drivers seemed to be based off the CPU (AMD) going by the name of the driver file.
Mobo: GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
CPU: Intel Core 2 Quad Q9550 Yorkfield 2.83GHz LGA 775 95W Quad-Core Processor Model BX80569Q9550
RAM: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
VGA: EVGA 896-P3-1255-AR GeForce GTX 260 Core 216 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
HDD: Western Digital Caviar Black WD6401AALS 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
as far as i can tell i have an amd 780g chipset (intergrated with the motherboard ,the hd3200 package)
The problem im having is my pc wont recognize my sata ide controller and uses "Standard Dual Channel PCI IDE Controller"
Can anyone point me in the direction for the drivers?
i use the USB TO SATA ADABTOR but that dose not work my windows is 7
View 1 Replies View RelatedI want to dual boot Win XP and and Win 7 and I need my SATA drivers. I've been searching the internet and the ASUS website but I can't find the SATA drivers.I have an ASUS G73JH. I can't find my MoBo model. I used everest but it says unknown motherboard. My hard drive is a Seagate Momentus St9500420as.
View 8 Replies View Relatedthe board is DFI lanparty DK P45-T2RS PLUS, i'm trying to install the sata driver, but i have no idea which of the controller i need to update driver for:
View 7 Replies View RelatedAm expecting to receive my copy of Win 7 tomorrow, have got my drivers ready but am wondering whether there is an issue with installing Win 7 onto a SATA drive.
Had issues when installing XP as it wouldn't recognise the SATA drive and wouldn't load the drivers either. Ended up making a slipstream disk with the drivers on which took a while to get right.
Does Win 7 install onto a SATA drive straight out of the box or will I have the same problems as I had with XP?
SATA in BIOS set to IDE.
Pioneer DVR-S18 SATA DVD-RW
SATA HDD
How can I get past this problem as I cannot find drivers on the pioneer site..
I am trying to install Windows 7 on a system I just built and it tells me that it cannot be installed to my hard drive because it is "of the GPT partition style" and that "the partition is of an unrecognized type". What does this mean and how can I resolve it?The motherboard is intel DH55TC and the hard drive is Western Digital SATA 500GB.
View 3 Replies View RelatedI am building a workstation atm for my grandmother -
Spec's -
Spoiler :
Mobo - Gigabyte 990FXA-UD7 AMD 990FX AM3+
PCU - AMD Phenom II X6 1100T Black Edition 3.3Ghz
HDD - WD Caviar Blue 500GB SATA HD 7200/16MB/SATA-6G
2 hours ago,i wanted to install windows7 on my sata disk ,cause i destroyed my old partition with ubuntu 10.10. So i started to install Windows 7 .However it couldnt be normal.Then i get an error: . A partition on the disk''0''could not be formatted .The error occurred while preparing the partition selected for installation .Fault code: 0x80070057
View 1 Replies View RelatedI just installed a new HD. [URL] - Western Digital Caviar Green WD20EARX 2TB 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I hooked it all up and the BIOS seems to see it. And Windows "found new hardware" and "installed drivers".
This seems to be such a frequent issue that it could/should be a FAQ but I haven't found my answer yet.
I am (currently) running Windows 7 64 ULT on my home PC. I purchased an Intel X25M 80GB SATA drive and connected it in order to benefit from the speed. The issue is that setup hangs during the "expanding files" on this drive. Looking back I have *never* been able to install windows (XP Vista or 7) on a SATA drive on my mobo.
In order to avoid confusions I did the following.Removed the 2x400GB striped drives. Removed the old PATA-IDE drive, therefore only drives available were the Optiarc DVD and the new Intel SSD.
How to Install a SATA DVD CD Drive in a Desktop PC ?
View 0 Replies View RelatedI have an adaptec sata controller card, which I was contemplating using for running my two raid drives.
I know that there are Vista 64 drivers availiable to download, and so my question is this,
will Vista 64 disk drivers work with Windows 7 Beta build 7000?
I thought i'd ask here first, as it seems silly to reformat and save disc images, reinstall etc, if someone here already knows the answer.
Also, is there a simple way transferring all the user's data and programme data if I wanted to upgrade to a newer build, as obviously backing up the disc image won't work I suppose with a newer build of 7?
my computer was working fine, but then I goto boot up today and it doesn't even recognize my Hard drive. I'm running windows 7 ultimate, 64bit.The computer won't even boot, my bios boot priorities are set as default.
View 1 Replies View RelatedI really want to go back to a dual install (Windows 7-64 Pro and Windows XP) but I want to add XP to Windows 7 which is already loaded. I know how to load Sata drivers when loading XP first (have drivers on CD) but after looking at the tutorial it mentions adding Sata drivers to XP using 3.5 disk. I do not have 3.5 drive. HP Pavilion a6130n/3 internal 1TB drives. XP and 7 will be on separate hard drives.
View 8 Replies View Related