Not Recognising Network First Time?
Dec 8, 2011
every time i start up my pc it always comes up with "Limited or no connectivity" and comes up with my network and an "unidentified network" in the network and sharing center. I only have it connected to one network and that's my BT Homehub 2.0 router.t is connected directly through Ethernet. But when i click restart and wait for it to boot up it goes back to normal, showing one network and full internet access. As it should. just a pain to have to do this every time. In the device manager under network adapters it says "Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller"
View 10 Replies
ADVERTISEMENT
May 31, 2012
Until a couple of weeks ago I was quite happily running my Nvidia 9400 GT GPU with no issues. Windows update wanted to update as it does every now an then and afterwards I get a black screen?? I switched to my on-board graphics everything is fine - I try the 9400 and nothing........ it gets weirder....... couple of days later I turn the computer on again and the 9400 is working again..... does so for a few days then black screen again I've been out today and bought a Nvidia GT 620 and plugged it into the motherboard but even that isn't showing up in device manager
View 2 Replies
View Related
Apr 2, 2012
I just recently replaced my screen on my laptop. The problem is that my laptop isn't recognizing the new screen. My laptop boots up like usual but my screen is black. Whats weird is I can leave my old screen plugged in.until my laptop boots up.then plug in my new screen. which stays on then. I can surf the net as usual. but when I reboot my laptop...its back to a black screen.
View 5 Replies
View Related
Feb 21, 2011
I've an Acer Revo running Windows 7 as my HTPC.Everytime I type certain keys on my wired Acer keyboard it displays numbers instead of letters or it displays the wrong letter. This happens for certain keys e.g. when I press 'u' I get '4' and so on. Why is this happening? I understand you press certain function keys together it can change the keyboard settings. Is this true and how do I turn it off?I know it's not the computer as I normally used a remote connection to access the PC and typing this way works fine. I only have this problem when I use the computer directly with its wired keyboard.
View 4 Replies
View Related
Apr 19, 2011
I have an enclosure with my hard drive in it and connected it to the computer it was not found and i think its because its disabled i go to computer manage disk managemtent and recovery disk,i click properties click on my hard drive (toshiba...) click enable, then i click next and it says windows was not able to enable the hard drive
View 1 Replies
View Related
Jun 16, 2011
i recently invested in a new PC - for my job i use high volumes of data so need a high end database setup for fast access to info - to do this i have invested in two SSD hard drives that i am hoping to run in a RAID array and these are completely dedicated to my database. So after alot of work i have my machine up and running, it has a 60GB SSD for running windows 7 64-bit home prem. on, 2x120GB SSDs that will run my database and a 1TB SATA HD for storing whatever else i have on. Now the part i am having real trouble with is configuring the RAID array, firstly in the BIOS main menu i dont see the 3 SSD drives:-However the drives all show up in the windows disk management window. Back in the BIOS, when i enter the SATA config. menu, i find that ports 1-4 are grouped together (currently set to AHCI), and it is possible to switch them into a RAID array but this is no good b/c it means my 60GB boot drive wont operate correctly - i cant seem to find a way for switching the individual ports to RAID, mainly since the ports arent listed individually?
another thing that i am unsure about is the way the drives are listed in the boot menu - they show up listed as IDE's although in the SATA config menu they are listed as AHCI controlled - i am unsure but think this may be a glitch with the BIOS for this motherboard where it doesnt update changes properly.
View 3 Replies
View Related
Jan 21, 2012
Sabertooth 990fx with amd 8120 not recognising windows 7 drivers down loaded from their site .rom files
View 1 Replies
View Related
Nov 16, 2012
recently had a few parts die on me so i have started to rebuild a whole new comp my motherboard is a asrock 970 extreme3 cpu is a fx 8-core black edition and gpu is a gigabyte hd7850 2g gddr5 with a seagate 1tb barricuda 7200 hdd now thats out of the way my problem is im trying to reinstall win7 but neither my bios or win 7 rrecognising my hard drive i get stuck at where it asked me where i want to install it to i try load drive but as i said
View 1 Replies
View Related
Aug 3, 2011
I have a 4gb memory stick that I have used many times to install Linux etc on old laptops etc. Now that I want to use that stick to copy off some files from Win 7, I notice that Win 7 suggests its capacity is only 1gb.I think I have seen this kind of thing happen before but cant remember how I resolved it.Anyone got ideas on how to kick-start Windows 7 into recognising its full capacity?
View 3 Replies
View Related
Nov 28, 2009
I know nothing about a network, other than the concept and terms, so I really need some guidance getting this off the ground. I have two computers connected via a router, but at the moment, neither computer sees anything on the other computer. I want each of them to have as much access to each other as possible, how do I accomplish this, starting at step 1.
View 5 Replies
View Related
Nov 2, 2011
In our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.
When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.
So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.
A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (that program is now gone!!) and really hosed up his PC. He bought the Windows 7 upgrade software and wiped the hard drive and installed Windows 7. He is now having the same issue as I am.
For what it's worth, he is using a Belkin Wireless-G USB wireless adapter, and mine is a Netgear Wireless-N USB adapter.
Is there any way we can have the two connections operate at the same time like they did in XP? It really becomes a pain sometimes when we are on the phone with a client and we need to jump back and forth between info that is online, and info that is on our server that we access through ACT!.
View 2 Replies
View Related
Feb 6, 2010
I have problem with my windows 7. When i try to open a directory on LAN, every now and then it begins to reload the directory. The upper bar begins to fill up with green color (in my theme of course), and it takes very long time, like 3, or 4 minutes. In the directory there is not much stuff, maybe 200 or 300 text files. And during this 3 or 4 minutes, the computer is almost blocked.
It is very slow, the browser can not connect to any site on internet, any programs that are working stalls, or becomes very slow. When the directory is loaded, things return to normal. And what is more, this problem does not occur with every directory on the LAN, only with some of them.
What can be the reason and how can I fix it?
View 1 Replies
View Related
Feb 26, 2010
I have an asus G72Gx laptop running windows 7 home premium. Went through the nightmare of my wireless antenna never turning back on and now I am facing a new issue.
My laptop is taking a really long time to connect to a network. And I mean a REALLY long time. Minutes. When it should be near instant.
The problem happens on both the wireless and the wired NIC. I have also tried this at multiple locations: home, airports, hotels all with the same result. Not only does it take a while for it to establish a connection to the router, but it seems to take the same amount of "extra time" for it to get internet connectivity. It will initially connect to a network and windows will give the "Limited Access" message. And then a couple minutes later I will have internet access.
This is absolutely driving me nuts. Also it seems to have the added side effect of making it difficult to connect to lobbies in the Starcraft 2 beta. It might be unrelated, but I digress.
Any Thoughts?
View 10 Replies
View Related
Jul 25, 2012
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
View 1 Replies
View Related
Aug 11, 2009
Im using Windows 7 build 7600.
I have a windows server 2003 file server and a windows 2003 SBS domain controler. The file server is a member server. My windows 7 client is joined to the domain. When i log on to the domain, a script runs that maps drives from the file server to my comp. My domain account has Full Control over the drives on the file server.
Since installing windows 7 each time i open an mp3 file (Which are between 10 and 20mb) from the maped network drive, its taking 8 seconds to open each one. Baring in mind i have a GB lan with both my laptop network card and server network card set to 1gbps full duplex. I have a LOT of mp3 files that i browse through, but every time i select a differnt track it takes 8 seconds for it to open, same for the next track and the one after that and its begining to drive me nuts . Ive tried using differnt media players, for example winamp, media monkey, itunes and wmp and with each one i get exactly the same 8 seconds per music file.
This does not happen with one of my xp machines both over wirelesss and hardwired in to the lan, tracks open instantly from one to the other. After messing about with it for a while i stumbled accross something. If i map directly to shares on the network drive (which is set to read only) the tracks open instantly from one to the next no problem. However, if i set the share permission to “full control”, i get exactly the same problem, 8 seconds per music file.
And i REEEEEEALLY dont know why its doing it. As ive said it works fine on windows xp, i have a gb lan with both cards set to 1gb full duplex (have even tried auto negociate ) and cat5 e cabling via a D-Link GB Switch. The only thing that seems to fix it is setting the share on the file server to read only. Now i could just play the tracks via the share and be done with it but, the shares are set to read only for a good reason. I have the network drive (where the shares live) maped to my computer because im always adding to, and manipulating folders on the drive, including the mp3 files. As a work around im having to play the tracks via the actual share and modifly or delete any mp3 files via the maped network drive.
View 2 Replies
View Related
Dec 17, 2009
so after logon on windows 7 , my networking freeze for some time it looks that: , and other apps in autostart can't load until this icon will be clear without this ring inside.
I have PC connect to router and installed the newest realtek driver for win 7 on motherboard asrock p43de. Whats the problem, how to fix it, before i it normally loaded..
View 2 Replies
View Related
Dec 29, 2009
yesterday i buy a wireless broadband router - 4 ports and i encounter some change, i don't know if it is a problem with the settings or it is normal.
questions:
1. My desktop computer is connected to the router through Lan. when i start the computer. my comp identifies the network for 2 mins.. it is normal? or i need to change settings or the router?
2. i cannot connect to my other PC that is also connected in Lan.
View 9 Replies
View Related
Jun 25, 2012
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
View 2 Replies
View Related
Nov 16, 2011
For some reason my laptop takes forever to connect to a shared drive on my desktop on my home network. I've tried connecting to it by mapping the drive and through windows explorer and same thing. Sometimes it won't even connect at all. I don't have this issue with other computers on the network. And when I say a long time I am meaning like 5 minutes or more. At first it was maybe only 1-2 minutes but it is getting worse. My mouse icon has had the spinning ring around it trying to connect the whole time I have been writing this.Both computers are Win 7 pro x64 with sp1. Desktop is wired directly to the router and laptop has excellent signal strength. Both have DHCP reservations set in the router. The way I usually connect is by starting a run box and typing \[desktop pc name][share] then it just spins
View 9 Replies
View Related
Sep 6, 2011
Sometimes when I connect to a wireless network it takes windows a long time (+2 min) to id the network and set it as public. Is there anything I can do to speed this up?
View 3 Replies
View Related
Jul 31, 2012
I have recently installed a network printer and had many problems. I've changed the IP address 3 times to resolve and still cannot. When I do a continuous ping to the printer (approximately 100, I had 4 request time outs). The 4/5 clients using the printer are having problems printing to it.
View 9 Replies
View Related
Apr 26, 2011
About a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).
Therefore, I can't use or edit the program. Neither the touchpad nor the cordless mouse works.
Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.
Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine? I am a novice user but I can follow instructions. However, I don't want to put my computer at risk if I make an entry error.
I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.
I just wanted a conclusive way of putting the ball back in the manufacturer's court.
View 5 Replies
View Related
Apr 23, 2012
I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue.
Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.
Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?
P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?
View 9 Replies
View Related
Jan 14, 2012
So I bought a new desktop computer about 2 weeks ago and ever since I got it, it's been freezing (locking) up on me at random times. I currently use Windows 7 64-bit. I put in a new graphics card and new memory sticks just the other day and I got the same freezing problem. It's very random. I can be surfing the web and the next thing you know, the whole thing freezes up. I can't move the mouse. Can't do CTRL ALT DEL. Can't do anything. Seems as if the whole computer locks up. The only way to restart the computer is by manually holding in the power button for a few seconds. So since I replaced graphics card and installed new memory, I was thinking it may be something else causing this.
View 12 Replies
View Related
Jul 29, 2012
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
View 4 Replies
View Related
Nov 27, 2012
Once in a while I find that the time zone moves from GMT to Pacific Time.Has anyone any idea what would cause this, new CMOS battery fitted, which ever time zone shows the time is correct for that zone. Checked the BIOS and that also changes.I dual boot two Win 7 installations.
View 5 Replies
View Related
Feb 23, 2012
I have an issue with my P8P67 PRO (Rev 3.1). Mouse but mainly keyboard (both Microsoft) are not detected during the cold boot from time to time, i suspect the BIOS is the one to blame i have the latest version, what can i do?Both are USB.When i turn on the PC from time to time a long beep takes place and a message during posting (no keyboard detected). Sometimes happens sometimes not. PS/2 ports didn't work for me, when im using them NOTHING gets recognized (and yes i turned off the PC before plugging them).
View 9 Replies
View Related
Nov 6, 2009
I loaded Windows 7 three computers, 2 desktops and 1 laptop. My Dell XPS is the one that keeps flashing a black screen from time to time. It seems like it is thinking for a few seconds but when this happens it is like my monitor turns off.
View 2 Replies
View Related
Nov 6, 2011
I've been having this issue for awhile now. When I try to do multiple things at once Windows seems to freeze for minutes at a time.I am running stock settings on all of my hardware so Im confused to what could be happening. [code]
View 8 Replies
View Related
Apr 20, 2011
I've installed snow leopard (hackintosh) on a separate partition and since then I've been having trouble with the clock it reads 3 extra hours than the original timeSo I deleted Snow Leopard and formatted the partition and checked the time again and no change at all
View 8 Replies
View Related
May 27, 2011
my window does not start in first time, it shows scattered graphics, when i again restart it it starts, every time this happening
View 1 Replies
View Related
