I know nothing about a network, other than the concept and terms, so I really need some guidance getting this off the ground. I have two computers connected via a router, but at the moment, neither computer sees anything on the other computer. I want each of them to have as much access to each other as possible, how do I accomplish this, starting at step 1.
View 5 Replies
i was wondering if it is possible to revert windows 7 back to the first time setup i know this was possible on xp (without loosing installed programs) can this be done on windows 7
View 4 Replies View RelatedI am building a new system for a friend. I was wondering how do I enable the setup screen for a first time user after I have installed the OS and updated all the drivers and windows updates? Like how do I make it so that when I give him the system and he turns it on for the first time it'll ask him all the setup info like when you start a new computer for the first time.
View 3 Replies View RelatedI would like to know the commands to enter to find the following:
-IP Address
-Internal IP Address
-Subnet Mask
-Gateway
-DNS Server
They are needed to set my new Sony TV for network setup.
I was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies View RelatedI have Windows 7 RC 7100 64-bit and my motherboard had dual gigabit lan (Two onboard nic cards). How can I setup network load balancing so when I do local file transfers it won't effect my download speed? Is it possible or does it do it automatic.
View 1 Replies View RelatedI'm trying (desperately) to set up my network on Windows 7, but have hit a bump in that it just cannot find my network. I checked Device Manager to see if the card was found - it was with a troubleshoot exclamation point on it.I removed the card, used the installation disc and am not able to get very far. After the install (after which nothing happens), I click on the Belkin Wireless Networking Utility icon on the desktop and it says "missing shortcut: searching for Belkinwcui.exe", after which I get a window saying "The item Belkinwcui.exe that this shortcut refers to has been changed of moved, so this shortcut will no longer work properly". That exe file isn't anywhere in my computer, searching through Explorer. In fact, in the Belkin install folder (Program Files (x86) -> Belkin ->FSD8001v1...) there just looks like maybe a driver (AegisE5.dll) and an application (AegisI5) that doesn't run. I guess is to take my PC upstairs and line it into my modem/base station directly, but I'd rather not move it.
View 9 Replies View RelatedI have a laptop and a pc with two connections on is internet and other is connected to a router i have tried to setup lan but it shows a network on pc but no network on my laptop.
View 1 Replies View RelatedI purchased and setup a wireless router that seems to be working. How do I now set up my home wireless network? How do I set up the password, etc? I know this is basic for you guys but DUH I have no idea what I am doing.
View 3 Replies View Relatedinternet connections troubleshooter problems found problem with the device for the local area connection adapter and also a problem with the driver for the wireless network connection 2 adapter how do i fix these?
View 1 Replies View RelatedI have spent at least 2 wks. trying to fix this. I've built dozens of computers (NewEgg)for my home,business and friends. And in 9 years I've only seen maybe 3 BSOD's. Networks have ALWAYS worked. Even w/ Windows 7 Beta, all was well. I just did a fresh install of Windows 7-7260 on my M1530 then did the same on my own computer.
Specs are in profile. Then I put 7250 on my downstairs friend's M1530. We are all on the same network group named CovellRussin. No variations. We live in the sticks so security is not a problem. DLink 825 router/DLink 1522 AP/DLink Switches.
Wife's Laptop is XP, a WHS, 3-Windows 7's, 1 Vista Premium on a M1330.
Like I said, up until I loaded 7260, the network was fine. I have tried EVERYTHING I can think of and MY computer will not see my wifes Xp(which has the QBooks and Tax programs on it). My M1530 sees her XP, My Computer and itself. My computer sees itself and the M1530. Is there a tutorial on setting up a mixed network for Win 7? If I don't fix this fast, I'm going to change my mind about loving 7. I am willing to go step by step with someone. I'll pay if I have to. I need my sanity and my computer back!
I realized, that the setup of the Network IF of windows 7 is slower than it was on XP. Sometimes the setup is also not working correctly resulting in an unavailable Network connection, so that I have to deactivate and reactivate the network adapter (even this does not help every time) Setup means the phase after rebooting or waking up from hibernate.
There is no difference on different networks. The Network Interface is a �Intel 82567LM Gigabit�. Driver are the newest from MS.
Are there any tricks to get a faster/ reliably network set up time?
How do I setup to connect to my home network?
View 2 Replies View Relatedhow to setup a small network for 20 users
View 3 Replies View RelatedI setup WPA2 on my router and everyone can connect just fine. But a new laptop with Windows 7 that used to be able to connect before I set WPA2 can no longer connect. It takes a few minutes connecting saying "Identifying" then ends up saying it's connected with "Unidentified network". Can't ping the router, can't get to the internet etc. I've tried rebooting both the laptop and router, network diagnostic (which just tells me to reboot the router) etc and nothing works.
View 4 Replies View Relatedsetting up a Network Printer for my small office with four (4) PC/Computers with the following details:
1. I dont have an Internet connection.
2. I have a printer with LAN capable
I wonder if I can use a switch, hub or routers but there are plenty of a kind, I don't know what to use and how to use.
Unable to get an HP Laserjet 1200 printer set up over my network. Running Windows 7 Professional 64 bit. I can see then printer when browsing network for printer but Windows insists on searching Windows Update, striking out and when browsing for other files I can't get any other HP *.inf files (both 32 & 64bit) I downloaded to take without crashing with errors. I connected the printer directly to my PC with a USB cable and Windows instantly recognized it and installed a driver for it. But still can't connect with it's hooked up on another workstation. Yes, it's set up for sharing on the other network PC.
View 9 Replies View Relatedhow do I find my network security key on my Verizon router 37H9B
View 2 Replies View Relatedevery time i start up my pc it always comes up with "Limited or no connectivity" and comes up with my network and an "unidentified network" in the network and sharing center. I only have it connected to one network and that's my BT Homehub 2.0 router.t is connected directly through Ethernet. But when i click restart and wait for it to boot up it goes back to normal, showing one network and full internet access. As it should. just a pain to have to do this every time. In the device manager under network adapters it says "Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller"
View 10 Replies View RelatedI can�t get online. Icon in taskbar says I don�t have a network connection. Upon exploring, I find that Windows 7 Pro has me setup for a �public network��which has a yellow exclamation mark on the left side between my PC and the network, and a red X on the right side between the network and the Internet.
DETAILS:Dell desktop PC. Was running Windows 7 Home, now running Windows 7 Pro (full install; not upgrade). I had a malware problem (images on webpages and links, etc. were not visible to me) with W7Home; cleaned it and went to W7Pro. However, now I have this whole new and far worse problem with W7Pro. (See �problem� above.) NOTE: I am the only person in my house and the only person using the computer. So I never had it set up for a network. I only own the desktop PC and don�t need a network. The �network� that is now set up on my computer was set up by W7Pro by itself as part of the problem. My IP is not static so I can�t input my IP manually�it�s set to automatically detect. Called cable modem service provider; they made the assumption my operating system came with my PC and told me to call Dell for support. When I explained my OS didn�t come with the PC, they then said �You need to talk to Microsoft.� Uh---no. The cable modem service provider said their server is talking to my PC�my PC is unable to get to them. (Makes sense, as that matches the pictures I�m seeing with the exclamation mark and red X.)
How to set up a User name and password on a Windows 7 pc so that I can access it on a network. I have shared the whole drive and turned on full access to all users.
View 5 Replies View RelatedJust today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
In our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.
When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.
So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.
A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (that program is now gone!!) and really hosed up his PC. He bought the Windows 7 upgrade software and wiped the hard drive and installed Windows 7. He is now having the same issue as I am.
For what it's worth, he is using a Belkin Wireless-G USB wireless adapter, and mine is a Netgear Wireless-N USB adapter.
Is there any way we can have the two connections operate at the same time like they did in XP? It really becomes a pain sometimes when we are on the phone with a client and we need to jump back and forth between info that is online, and info that is on our server that we access through ACT!.
I have problem with my windows 7. When i try to open a directory on LAN, every now and then it begins to reload the directory. The upper bar begins to fill up with green color (in my theme of course), and it takes very long time, like 3, or 4 minutes. In the directory there is not much stuff, maybe 200 or 300 text files. And during this 3 or 4 minutes, the computer is almost blocked.
It is very slow, the browser can not connect to any site on internet, any programs that are working stalls, or becomes very slow. When the directory is loaded, things return to normal. And what is more, this problem does not occur with every directory on the LAN, only with some of them.
What can be the reason and how can I fix it?
I have an asus G72Gx laptop running windows 7 home premium. Went through the nightmare of my wireless antenna never turning back on and now I am facing a new issue.
My laptop is taking a really long time to connect to a network. And I mean a REALLY long time. Minutes. When it should be near instant.
The problem happens on both the wireless and the wired NIC. I have also tried this at multiple locations: home, airports, hotels all with the same result. Not only does it take a while for it to establish a connection to the router, but it seems to take the same amount of "extra time" for it to get internet connectivity. It will initially connect to a network and windows will give the "Limited Access" message. And then a couple minutes later I will have internet access.
This is absolutely driving me nuts. Also it seems to have the added side effect of making it difficult to connect to lobbies in the Starcraft 2 beta. It might be unrelated, but I digress.
Any Thoughts?
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
Im using Windows 7 build 7600.
I have a windows server 2003 file server and a windows 2003 SBS domain controler. The file server is a member server. My windows 7 client is joined to the domain. When i log on to the domain, a script runs that maps drives from the file server to my comp. My domain account has Full Control over the drives on the file server.
Since installing windows 7 each time i open an mp3 file (Which are between 10 and 20mb) from the maped network drive, its taking 8 seconds to open each one. Baring in mind i have a GB lan with both my laptop network card and server network card set to 1gbps full duplex. I have a LOT of mp3 files that i browse through, but every time i select a differnt track it takes 8 seconds for it to open, same for the next track and the one after that and its begining to drive me nuts . Ive tried using differnt media players, for example winamp, media monkey, itunes and wmp and with each one i get exactly the same 8 seconds per music file.
This does not happen with one of my xp machines both over wirelesss and hardwired in to the lan, tracks open instantly from one to the other. After messing about with it for a while i stumbled accross something. If i map directly to shares on the network drive (which is set to read only) the tracks open instantly from one to the next no problem. However, if i set the share permission to âfull controlâ, i get exactly the same problem, 8 seconds per music file.
And i REEEEEEALLY dont know why its doing it. As ive said it works fine on windows xp, i have a gb lan with both cards set to 1gb full duplex (have even tried auto negociate ) and cat5 e cabling via a D-Link GB Switch. The only thing that seems to fix it is setting the share on the file server to read only. Now i could just play the tracks via the share and be done with it but, the shares are set to read only for a good reason. I have the network drive (where the shares live) maped to my computer because im always adding to, and manipulating folders on the drive, including the mp3 files. As a work around im having to play the tracks via the actual share and modifly or delete any mp3 files via the maped network drive.
so after logon on windows 7 , my networking freeze for some time it looks that: , and other apps in autostart can't load until this icon will be clear without this ring inside.
I have PC connect to router and installed the newest realtek driver for win 7 on motherboard asrock p43de. Whats the problem, how to fix it, before i it normally loaded..
yesterday i buy a wireless broadband router - 4 ports and i encounter some change, i don't know if it is a problem with the settings or it is normal.
questions:
1. My desktop computer is connected to the router through Lan. when i start the computer. my comp identifies the network for 2 mins.. it is normal? or i need to change settings or the router?
2. i cannot connect to my other PC that is also connected in Lan.
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
For some reason my laptop takes forever to connect to a shared drive on my desktop on my home network. I've tried connecting to it by mapping the drive and through windows explorer and same thing. Sometimes it won't even connect at all. I don't have this issue with other computers on the network. And when I say a long time I am meaning like 5 minutes or more. At first it was maybe only 1-2 minutes but it is getting worse. My mouse icon has had the spinning ring around it trying to connect the whole time I have been writing this.Both computers are Win 7 pro x64 with sp1. Desktop is wired directly to the router and laptop has excellent signal strength. Both have DHCP reservations set in the router. The way I usually connect is by starting a run box and typing \[desktop pc name][share] then it just spins
View 9 Replies View Related
