Unidentified Network - WPA2 Wireless Setup
Feb 14, 2011
I setup WPA2 on my router and everyone can connect just fine. But a new laptop with Windows 7 that used to be able to connect before I set WPA2 can no longer connect. It takes a few minutes connecting saying "Identifying" then ends up saying it's connected with "Unidentified network". Can't ping the router, can't get to the internet etc. I've tried rebooting both the laptop and router, network diagnostic (which just tells me to reboot the router) etc and nothing works.
View 4 Replies
ADVERTISEMENT
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
May 22, 2011
I have my ip config below:
Windows IP Configuration
Ethernet adapter new:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ddc2:bdfa:e412:c367%12
Autoconfiguration IPv4 Address. . : 169.254.195.103
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : ............
View 2 Replies
View Related
Nov 14, 2011
How to use an iMac as a wirless router with WPA2? I would like to share my broadband Internet connection that is provided by RJ-45 wired connection to my iMac. I have a Windows 7 laptop that I would like to use and have it connect to my iMac wirelessly. I have figured out how to share the iMac's airport connection but unfortunately the Mac OS X 10 software only supports WEP.
View 1 Replies
View Related
Dec 5, 2011
lost my software, download wrt54gv5 software
View 2 Replies
View Related
Oct 22, 2009
I'm trying (desperately) to set up my network on Windows 7, but have hit a bump in that it just cannot find my network. I checked Device Manager to see if the card was found - it was with a troubleshoot exclamation point on it.I removed the card, used the installation disc and am not able to get very far. After the install (after which nothing happens), I click on the Belkin Wireless Networking Utility icon on the desktop and it says "missing shortcut: searching for Belkinwcui.exe", after which I get a window saying "The item Belkinwcui.exe that this shortcut refers to has been changed of moved, so this shortcut will no longer work properly". That exe file isn't anywhere in my computer, searching through Explorer. In fact, in the Belkin install folder (Program Files (x86) -> Belkin ->FSD8001v1...) there just looks like maybe a driver (AegisE5.dll) and an application (AegisI5) that doesn't run. I guess is to take my PC upstairs and line it into my modem/base station directly, but I'd rather not move it.
View 9 Replies
View Related
Nov 15, 2012
I 'm trying to connect my netbook to my wireless home network but it won't recognise the security key. I have Windows 7 32 bit installed. I have successfully connected it to my sister's network which is WPA2 protected, but when I try to connect to my own d-link dsl 2680 router, it keeps telling me that the security key or passphrase is incorrect even though I am typing in exactly the right password. My router is also WPA2 protected but for some reason the netbook fails to connect. My other laptop and my PC have no problem connecting at all though. It's just the netbook that seems to be the problem. It will however connect with a cable and also if I change the router's security setting to WEP. However I don't really want to leave it as WEP as this is less secure than WPA2. I've tried changing the SSID and password but it still won't connect. Before I installed Windows 7 I had XP running on the netbook and then it connected no problem. I don't know why I can connect to my sister's network but not my own.
View 9 Replies
View Related
Mar 16, 2012
I purchased and setup a wireless router that seems to be working. How do I now set up my home wireless network? How do I set up the password, etc? I know this is basic for you guys but DUH I have no idea what I am doing.
View 3 Replies
View Related
May 19, 2011
As you can see from the screenshot on imgur, a device recently began to appear in my network. I assume the device named Jennings-PC is a wifi enabled device that is being detected by some node om my network. Any one else experiecned similar issues or know how to prevent it from appearing? My network is secured using WPA2, the device is not associated with the router in any way. [URL]
View 2 Replies
View Related
Jul 11, 2012
I have a Windows 7 x86 Operating system on a HP Pavilion g6, and in my network list, I have 3 networks. "Network 1" (Hamachi), "Network 3", LAN, and "Unidentified Network". Strangely, any wireless connections appear as "Unidentified Network", and although everyone else can connect just fine, it says "No Internet Access". If I unplug my LAN cable, it still doesn't work. The network has the icon for a public network, (a park bench), but I have no way of changing the network type, though I can change the network types for my other networks. Previously, I had the problem, and I just upgraded my router, I have the same problem.
View 1 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Aug 17, 2011
My problem is that I work in a school and we have bought 22x Samsung N145 Plus Netbooks. They use Atheros AR9285 wireless cards and I'm having problems connecting them successfully under Windows 7 to my D-Link access point. The fact is that the security has been set to WPA, using AES. The laptops are the same and are connecting, but 9 times out of 10 they pick up an autoconfiguration IP of 169.x.x.x.I sometimes get one working, but never have more than one connect at the same time. I need it to just pick up my 'chads.internal' domain network but it rarely does it successfully. I've tried adding the settings manually, I've tried 3 different network card drivers for WLAN (latest out from the Atheros homepage, second latest as requested to be tried by Samsung tech support, and a version 8.x.x.x driver after reading that 9.x.x.x drivers are 'flaky'), 2 different wireless access points, and the next step that I'm trying is to see if Windows XP will connect!!! I really don't want to have to go down that route!
View 1 Replies
View Related
Aug 8, 2012
I just moved to Peru for my study abroad. When I first connected to the wi-fi in my homestay I was successful. Suddenly, I cannot get internet access and it says it is an "unidentified network". I have tried manually inputting IP addresses, DNS, etc. I have tried forgetting the network and disabling my virus protection. I can't even get internet when I plug an ethernet cable into my computer, directly into the router. My laptop is the only thing that isn't working, other people's computers work and my iPod and smart phone work with the network. I have a Lenovo Windows 7 PC, running Windows 7 Home Premium 64 bit.
View 5 Replies
View Related
Sep 6, 2009
I just moved to a new home, and i cannot connect to my local LAN ! I am on a Mac right now ( arghh ) and the Internet works fine on this one.
I am using a cable to a router, wich is connected to a modem. The router is fairly old but has always worked fine ( using a direct cable doesnt work aswell ). Windows 7 says it is connected to a 'Unidentified Network'. The ipv4 settings for the adapter are; Automatic ip/dhcp.
ipconfig gives an ipv6 address. The automatically generated ip is: 169.254.241.20. There is nothing at Default Gateway. The driver settings are correct, as far as i believe. I downloaded the latest x64 Windows 7 marvell yukon drivers.
I disabled sleep mode on my pc. I don't have the Bonjour service running. On the Mac, i only had to enable DHCP and it recognized the network correctly. These are the ip's that it got:
ip: 83.87.107.135
subnet: 255.255.248.0
router: 83.87.104.1
This is getting frustrating since i cannot see where the problem could be.
here are my specs;
Asus p5w DH Deluxe
win 7 ( 7600 )
q6600
2 integrated network adapters on the mobo: Marvell Yukon 88E8053 pci-e Gigabit Ethernet Controller
View 7 Replies
View Related
Jul 18, 2012
I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies
View Related
Apr 8, 2011
my laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies
View Related
Dec 31, 2011
Yesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.
- I am using d-Lan (PowerLan) and have had no problems with it until today.
- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.
- I have tried Troubleshooting with no effect
- It isn't an IP conflict
- It isn't a 3rd party program (I started it in safe mode, same problem)
- Internet still works over my W-Lan but is incredibly slow and unstable
View 6 Replies
View Related
Dec 26, 2009
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
View 9 Replies
View Related
Mar 7, 2011
I have got a desktop computer and a laptop at my home. I have got a single internet connection. So I added an extra NIC card to my desktop PC. Then I connected my desktop to the internet and then connected my laptop and desktop using a crossover network cable. Both my machines have got win 7 installed. So when I created the network my laptop identified the network and allowed it to me to choose between home, work and public networks. I am able to share the internet too. But my desktop keeps on saying unidentified network which prevents me from joining my home-group.
View 2 Replies
View Related
Jul 27, 2009
Ive just installed Windows 7 7600 HP on to one of our work PC's and it says its connected to an unidentified network. I cant change it to work network or even Home network but the strange thing is its working fine. All our other PC's can see it and share files on it etc and i have internet access on it.
This is the second time ive installed HP and the second time this has happened. In the past ive been using Ultimate and this didn't happen.
We use static IP addresses for our internal network with no DNS server.
Anyone got any ideas how i can change this network location. Im using HP as im testing it out for when my copy arrives in Oct but if this is a problem related to HP i might think again.
View 3 Replies
View Related
Nov 30, 2009
about a week ago I started to get an unidentified network issue on my laptop.
here is how it basically works. I will see the network i want to connect to, and click on it. after which it will tell me that it is taking awhile finding the network, and then connect me to a unidentified public network. and it will tell me to the left of that that I am connected to the network I tried to connect to, but I have no Internet access.
I have tried turning the adapter off and on, restarting and I have deleted bonjour, (I think) and can't figure out what it might be. help please?
View 7 Replies
View Related
Jan 14, 2012
I am facing Unidentified network problem
View 3 Replies
View Related
Aug 10, 2012
I just bought anew Acer Laptop with Windows 7. When I try to connect it to my home network it shows a good signal strength but it will not connect me to it. I get a box saying it is an Unidentified Network. We have gone through all the normal internet connection paths and reset the router. We are able to access an Iphone with no problem. WE took this laptop to my sons house and could not access his home network either. Receiving the same Unidentified Network message when we tried. We called Acer and they wanted us to pay for a remote access to this brand new laptop. We refused. We will take the laptop back to the store first because that is not right.
View 1 Replies
View Related
Sep 5, 2011
About two months ago I had some money problems and was forced to move in with my dad. I have a 20GB Xbox 360 and Xbox Live. I knew my dad had the internet so I could still use Live.I have been doing so via an Ethernet wire going from my laptop (connected via wireless to the router) to the Xbox.
View 2 Replies
View Related
Jun 10, 2011
I am working on my bosses personal desktop. It had windows xp 32bit. Due to a virus the hard drive had to be wiped. He purchased windows 7 (32bit) to be installed.It's an older hp (about 3-4 years) with a intel pro VE 100 network card.the hard drive was completely wiped (including the partitions) and windows 7 32bit was installed.dispite what i select as the network type, it conitnues to set it as an unidentified network. I have tried reinstalling, wiping it again and reinstalling. It conitnues to set it as unidentified
View 1 Replies
View Related
Apr 19, 2011
My pc is connected a router with an ethernet cable. The router was reset and now the pc cannot connect to the internet.The message I get is,unidentified network access type No Internet access,work network connections,local area connections,we have rebooted, turned computer off then on, reset back to a previous time, changed the ethernet cable
View 9 Replies
View Related
Apr 23, 2011
Windows 7 64-bit Home Premium
ACER Aspire X3400
Nvidia Nforce 10/100/1000 ethernet
Cable internet
SB1502 Cable modem
When I try to connect to the internet, it just says "identifying" then says it is an "unidentified network". I've tried:
Resetting the modem
Checked all cables
Uninstalled and reinstalled the drivers
Disabled & enabled the drivers
It's set to automatically connect to DNS
Updating the ethernet with the latest from Microsoft
Ran ipconfig /release and renew
Tried another modem and new cables
Tried other houses with DSL & Cable internet
I installed a USB wireless device which worked when I tested it in wireless areas. But so far nothing has worked for the wired part. At one point before all this started, the internet worked intermittently and would work at other houses perfectly. So I assumed it was my modem or connection at my house. But then I plugged another PC into my modem and it worked instantly. So I know there is no physical problem with my connection, modem or cables.
View 9 Replies
View Related
Jun 15, 2009
I decided to just post this as a new thread, as it appears to be getting positive results for most people. I highly recommend it anyway, as you will eventually encounter this if you apply all of your updates.For those of you reporting problems with your network after updating MS Office or installing Adobe CS3..If you are having Internet connection problems related to "Unidentified Network" showing and the "!" over your NIC icon, then this should take care of it: [code] If you do, stop it and disable it. It is actually the Bonjour DNS Responder Service, and I believe it is the cause of the "Unidentified Network."The Unidentified Network disappeared after stopping this service and a quick disable/enable of the NIC, restoring Internet access.I Actually just rebooted, edited this post, and then re-enabled the offensive service to see what would happen...Immediately after enabling the NIC and this bastard service, the "Unidentified Network" returned...stopped it, disabled it, disable/enable NIC...Internet back up and running and no "Unidentified Network." (woot - woot!)
I experienced this in both build 7100 and 7127...I am running 7127 now x64 - and discovered this fix just last night...so far so good just rebooted and then edited this post...I believe this fix will solve 7100 build issues too; however..I have not tested 7100 again yet.I also re-enabled Win 7's Discovery Mapping services, but always leave IPv6 disabled just because I am not using it.another two reboots, and a hard disk addition, and no problems with the Internet! - If you tried another fix such as changing the address of your network adapter, under "Advanced" - this is not necessary...I set mine back to "Not Configured." Everything is working fine as long as the Bonjour service is not running.. [code]
View 9 Replies
View Related
Jan 18, 2012
I recently had a virus that I had removed, but now that its gone, I still cannot connect to the internet. It does not detect the ethernet cable when its plug in, as in the LED does not light up green.This is what CMD shows me when I do ipconfig /all Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.
C:UsersAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : ADos-PC[code].......
View 1 Replies
View Related