I have a peculiar problem. I can download windows updates, But the installation fails. I did everything what i could do. But no success. I am using IE 7 with Norton internet security suite 2007 (Automatic windows update option enabled in it).
View 5 RepliesSequence of events: Win XP Home SP 0 problem began with spyware, which I removed [ using spybot 1.3, ad-aware SE, HiJackThis 1.99, CWShredder, About:buster I tried to update to SP1, from the Windows update site, as well as from a Win XP SP1 update disk, but received an error. In Event Viewer, Windows Update Agent, Event ID 20, so I renamed C:Windowssystem32catroot2 to c:windowssystem32old_catroot2, & retried the SP1 installation. Re-ran SP1 setup / installation, which results in this error: Service Pack 1 Setup Error The file c:program filescommon filessystemole dbmsdasql.dll is open or in use by another program.Start > run > javascript:navigator.appMinorVersion results: Q823353;Q832894;Q867801
View 1 Replies View RelatedWhen i try to update windows its fails!! what i do is i run windows update and when its done/time to restart it says the updates failed what do i do ?
View 8 Replies View RelatedI needed to do (and did) some repairs to XP. Most things work, but limited sound.
I tried to upgrade XP using help and support. I need 87 upgrades and they all FAILED.?
Anyone else notice that this critical update failed for XP? I had the same error on three machines. the update history from the Windows Update Page.
View 6 Replies View RelatedThere seems to be a problem with my windows update. It downloads the necessary updates with no problem but as soon as it start to install it, it gives me a failed message. No error codes nothing, just failed. Did anyone experience this and know what the solution could be
View 3 Replies View RelatedI want to clean my computer and decided to install XP. After booting from cd I chose 'install XP' and enter. After a moment I got a blue screen saying windows failed to discover a hardrive. My computer works perfectly.When I go to my comp's bios my primary IDE master is my dvd drive. I have no primary slave, or secondary master/slave. I see no SATA options.I have a Maxtor 64160m0 SCSI hardrive.
View 13 Replies View RelatedI am trying to install Windows XP Prof. and it keeps failing to copy over files right after a format. It never is the same files, it has been about 15-20 different files on about 5-6 tries of installation.It asks you if you want to retry and sometimes that works, sometimes it doesn't, sometimes you have to skip. It says it could be the windows disk, but the windows disk works fine in my test machine and I can install windows perfectly over there.
View 3 Replies View RelatedSome of my system files are corrupted, so I tried to repair Windows XP SP2 by reinstalling. But it was corrupted in the middle because of error "The file 'asms' on the Windows Professional XP CD-Rom is needed". I couldn't go on. The installation is halted. And I couldn't login to Windows any more. I have a very big problem that I'd like to ask you all here. the HD now is readonly, it's NTFS so very few File manager app is used to see it (only Volka in Hiren's Boot CD could do that.
View 14 Replies View RelatedLast Tuesday's (Critical Update) Security Update for Windows XP (KB951748) A security issue has been identified that could allow a remote attacker to misrepresent a system action or behavior unbeknownst to users on Microsoft Windows systems. You can help protect your computer by installing this update from Microsoft.
View 2 Replies View Related1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
Just wondering if anyone else has had issues with this update? I have a XP Pro machine that won't take this update. I tried un installing all the .net stuff and installing the updates one at a time from .net 1 up to .net 3. I have got the machine to take up to the .net 2 sp1. It doesn't seem to like the .net 3 though. Anyone have a quick fix, reg hack or digital slege hammer to make this .net 3 to install properly?
View 2 Replies View RelatedI am trying to install a network printer with ip address 192.168.40.11 but STANDARD TCP/IP PORT is not available in the windows xp to add.But when I try to install any local printer also I am getting the error postedOperating system windows xp sp3
User has admin privileges
So this week MS released a critical update for IE6. The IE update failed on my machine.I submitted a trouble ticket via MS online portal which is free if a failure or anomaly occurs during a windows update. Yes, I gave permission for the MS portal to extract certain files.At the moment I am disinclined to download IE7 as my 99% preference4 is Firefox save for Windows and Office updates which require IE.Here is the response from MS.
View 5 Replies View Relatedright i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
View 5 Replies View RelatedDue to several fundamental errors in my Windows installation, today I decided to make a repair install of my Windows XP Home installation. I booted into my Windows disc, did all the normal stuff, and it seemed to go fine. At the end of the text-based stuff, it gave me the instruction to reboot, having moved the files it needed to the HDD, I believe. Anyway, the jist is that the text-based stuff seemed to go fine, I rebooted as instructed, and then did NOT click to boot from the CD (which, I believe, was the right choice). I let Windows load normally but... no GUI based stuff came up to finish off the repair installation, and consequently, what I've done seems to have had no effect whatsoever.
View 5 Replies View RelatedI've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies View RelatedMy intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies View Relatedi have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
I have this computer with Windows XP Service Pack 1.I am installing the patches and everytime the installation fails.Any procedure to follow in order to SUCCESSFULLY install the patches.
View 2 Replies View RelatedWhile trying to download and install the updates during the last Microsoft "Patch Tuesday" my PC locked up on the very last one KB922770. FIle name: NDP20-KB922770-X86.exe. A security update for .NET Framework 2.0. I waited patiently and still it did not install after 25 minutes. So, I had to shut down using the power button, rebooted and downloaded the file manually and tried installing it.
View 3 Replies View Relatedhope someone can help me! I have windows XP and a while ago IE stopped being able to download, i have resolved that by reinstalling IE, however about the same time my windows update installations were failing and i thought it was because of my download problem in IE however now IE is fixed but i still cannot install windows updates.Before anyone tells me to go into tools, options, security blah blah, i have done that already but it has not resolved the problem. The error message i get is just a box that says updates were unable to be successfully installed then a list of the updates it was unable to install, but no reason for the error or number is given.
View 14 Replies View RelatedI get the error message "Installation failure. Error code 0x643" when trying to install updates for the Malware removal tool. I have automatic updates on my computer also Windows genuine advantage validation.
View 5 Replies View RelatedBasically today I bought a 250gb hitachi sata HDD, dvd drive and computer case, got home, assembled the lot. worked fine. Got my Win XP SP2 installation cd and stuck it in the drive... and started to boot it up... it read the disk just fine, but for some reason every damn time it gets to (Mylex EXR2000, 3000/AR160, 170, 352 Raid Controllers) at the bottom of the screen it just stays there and never progresses.
It's causing me so much hassle. I went into the BIOS, turned off all RAID related options since he doesn't even have a RAID. Then that did nothing, figured I would get rid of the SATA drive for now incase that was the issue, put back in the old IDE 20GB drive... same thing happened. Got another Win XP installation disc that i've used loads of times with no problems... but that one came with it's own error.... a missing file apparently? Anyways the PC is sat downstairs with the old 20GB IDE drive in it and the CD drive and not much else really. All raid options in the BIOS are disabled and my mind is falling to pieces.
Windows update shield informs me I need to install Office XP SP3. I click on it, but the installation hangs up halfway through asking me to insert the Office XP CD - which I don't have.
Went to Microsoft download page and clicked on full file version (SINCE I don't have the CD), but still get the request to insert the CD halfway through the installation. Since I can't complete the download, the update icon pops up every time I log on. Any suggestions?
For several weeks now I haven't been able to download/update Windows updates. I have been working with Microsoft Tech Support (via the telephone)for several days now and we haven't been able to correct the problem(s). My question is... can I use the Windows Installation disk to "fix" any problems my machine is having with the downloads/updates? Is there a "fix" option on the Windows disk and am I at risk in using it? I don't want to lose anything on my desktop because it is the way I want it at this time.
View 1 Replies View Relatedi have an icon from microsoft.saids it has updates to install for microsoft office, update service pack 3.the only thing is it won't update.and the icon won't go away until it gets updated .plus norton keeps giving me a box saids norton can't update feature.to uninstall norton than reinstall.now my son did up my whole computer so i am afraid to really touch anything.
View 5 Replies View RelatedI've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
"Install the ActiveX control required to view the website," but I don't get the bar saying to install it. None of the troubleshooting tips were relevant.
View 3 Replies View RelatedAfter installing and running MSE I have been unable to update definitions either manually or automatically. At the same time I noticed that microsoft automatic updates are getting to around 28 percent and then stopping - not fully downloading or installing. I cannot get through to any microsoft websites now - but all other sites are fine. wuauserv and bits are missing from services also. Have I been sneakily virused by something which MSE hasnt picked up. I tried to run malicious software removal tool - it downloads alright but wont install - says its not a valid win32 application. I correctly downloaded the 32bit app. Can anyone shed some light on any of this. I dont want to rebuild again and again.
View 12 Replies View Relatedwen i turn on my laptop it keeps goin on 3 of 3 updates but does not install updates .then turns of an repeats all over again .an wont recignise cd/reboot factory instalationhelp
View 1 Replies View Related