I want to clean my computer and decided to install XP. After booting from cd I chose 'install XP' and enter. After a moment I got a blue screen saying windows failed to discover a hardrive. My computer works perfectly.When I go to my comp's bios my primary IDE master is my dvd drive. I have no primary slave, or secondary master/slave. I see no SATA options.I have a Maxtor 64160m0 SCSI hardrive.
View 13 Repliesi am new to this forum, but i have looked everywhere and i have a problem i can't seem to find the answear to. I reformated my harddrive, it is a seagate baracuda 160gb drive. I have it hooked up by raid i think. Anyways when i boot my computer it sees that i have a harddrive, but when i go to load windows it doesnt find it. I heard i need to install drivers for it, but i dont know which ones and where to get them from.
View 14 Replies View RelatedSequence of events: Win XP Home SP 0 problem began with spyware, which I removed [ using spybot 1.3, ad-aware SE, HiJackThis 1.99, CWShredder, About:buster I tried to update to SP1, from the Windows update site, as well as from a Win XP SP1 update disk, but received an error. In Event Viewer, Windows Update Agent, Event ID 20, so I renamed C:Windowssystem32catroot2 to c:windowssystem32old_catroot2, & retried the SP1 installation. Re-ran SP1 setup / installation, which results in this error: Service Pack 1 Setup Error The file c:program filescommon filessystemole dbmsdasql.dll is open or in use by another program.Start > run > javascript:navigator.appMinorVersion results: Q823353;Q832894;Q867801
View 1 Replies View RelatedI loaded windowsxp-kb936929-sp3-x86i on my pc runninig win xp and after laoding it it contiuously started to reboot stating no operating system and harddrive to be found. it happen 2 me on laptop and pc
View 1 Replies View RelatedI have a peculiar problem. I can download windows updates, But the installation fails. I did everything what i could do. But no success. I am using IE 7 with Norton internet security suite 2007 (Automatic windows update option enabled in it).
View 5 Replies View RelatedI needed to do (and did) some repairs to XP. Most things work, but limited sound.
I tried to upgrade XP using help and support. I need 87 upgrades and they all FAILED.?
I am trying to install Windows XP Prof. and it keeps failing to copy over files right after a format. It never is the same files, it has been about 15-20 different files on about 5-6 tries of installation.It asks you if you want to retry and sometimes that works, sometimes it doesn't, sometimes you have to skip. It says it could be the windows disk, but the windows disk works fine in my test machine and I can install windows perfectly over there.
View 3 Replies View RelatedSome of my system files are corrupted, so I tried to repair Windows XP SP2 by reinstalling. But it was corrupted in the middle because of error "The file 'asms' on the Windows Professional XP CD-Rom is needed". I couldn't go on. The installation is halted. And I couldn't login to Windows any more. I have a very big problem that I'd like to ask you all here. the HD now is readonly, it's NTFS so very few File manager app is used to see it (only Volka in Hiren's Boot CD could do that.
View 14 Replies View Related1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
Just wondering if anyone else has had issues with this update? I have a XP Pro machine that won't take this update. I tried un installing all the .net stuff and installing the updates one at a time from .net 1 up to .net 3. I have got the machine to take up to the .net 2 sp1. It doesn't seem to like the .net 3 though. Anyone have a quick fix, reg hack or digital slege hammer to make this .net 3 to install properly?
View 2 Replies View RelatedI am trying to install a network printer with ip address 192.168.40.11 but STANDARD TCP/IP PORT is not available in the windows xp to add.But when I try to install any local printer also I am getting the error postedOperating system windows xp sp3
User has admin privileges
My computers motherboard got fried a while back so I got a new one installed from a pc shop. They also reinstalled xp for me. Been working fine up until recently when I had to update norton. Once I installed my new norton and tried updating its protection it completely collapsed my xp so I had to try and re install xp mysellf only to find the same symptoms that many other xp installers appear to be suffering from. On installation process my hard drive was not detected. I tried other routes such as changing the bios settings disable sata control in the peripheral settings and I also tried making my own xp install cd including the drivers needed for the xp installl to be able to detect the hard drive but was unsuccesssful.
View 1 Replies View Relatedright i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
View 5 Replies View RelatedDue to several fundamental errors in my Windows installation, today I decided to make a repair install of my Windows XP Home installation. I booted into my Windows disc, did all the normal stuff, and it seemed to go fine. At the end of the text-based stuff, it gave me the instruction to reboot, having moved the files it needed to the HDD, I believe. Anyway, the jist is that the text-based stuff seemed to go fine, I rebooted as instructed, and then did NOT click to boot from the CD (which, I believe, was the right choice). I let Windows load normally but... no GUI based stuff came up to finish off the repair installation, and consequently, what I've done seems to have had no effect whatsoever.
View 5 Replies View RelatedMy desktop cannot boot up. I tried to reinstall windows XP.My BIOS (setup) can recognize the hard drive. but when I use OS CD reinstall XP, after loading files, chose continue install XP, I got error message, cannot find hard drive. the only option is F3 to quit installation. and my hard drive had click sound now..I doubt hard drive had some problem. I had did chkdsk from recovery console, but only 52% complete, chkdsk utility exit with "some part cannot recovered" message. why BIOS can see hard drive, but installation software cannot
find hard drive...
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies View RelatedI have recently built a gigabyte 770 modo with SATA harddrive. When I try to reboot with the XP cd to intall, everything went fine but when the system restart in harddrive, it is giving me disc error.
View 2 Replies View RelatedComputer has password, cant get in. I was going to just format the thing by booting up in 98 Boot from CD Rom Start Windows 98 Setup from Cd-rom Then starts checks PROBLEM When 98 starts its checks, the very first one says "No drives found, aborting installation." It throws me to a dos prompt A:> The only drive it sees is A. Now what I would normally do, is abort the installation of 98, it throws me to a dos. I put in my pcmagic cd in and execute. It sees only A: and B: but when I try to go to B: I get the "Not ready reading drive B" Abort, Retry, Fail. Basically I need to get to a dos prompt so I can execute pcmagic to format the drive
View 1 Replies View RelatedMy intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies View RelatedI tried with Partition Magic 8.0. It rebooted, and when the script would usually kick in, an error was displayed instead: xmnt2002 program not found - skipping AUTOCHECK and then it would boot. That frustrated me. I tried again, this time unhiding the partitions using grub before booting. Still, same error. So, partition magic was not going to work. Next I decided to try to go to the Linux installation directly, and use the YaST utility to resize my windows partition. I tried, but that failed as well. YaST gave me the "Failed to resize partition. The Installer will now exit" error each time I tried that. So, the Linux-rout failed as well.
By now I was quite frustrated. I decided to re-install Windows from the disks I had been provided, deleting the windows partition using the installation menu and re-installing it on a smaller portion of the unallocated space. Windows was installed using the same amount of space as the first installation -- It did not allow me to resize it's disk usage like I had planned. So, I lost all the software, but no matter, I reinstalled it all in a few hours, then attempted to resize my partition again...............
I recently found an old Gateway desktop in my basement. It is from a few years back, but I figured I'd do a clean install of Windows XP on it and run it in an extra room.I copied the drivers over using a program called DriverMax, and it seemed to work successfully. I had the internet right away and everything else I tried worked. The only problem I am having is that there is no sound. It also says there is no audio device found. Device Manager says I have the most up to date Legacy Audio Drivers, but I am still having this problem.Is there another driver that I might need in order for my computer to recognize an audio device.
View 5 Replies View RelatedI'm trying to install the drivers for my USB hub, and I'm getting the following message:
Completing the Found New Hardware Wizard
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.
View 5 Replies View RelatedI know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
View 2 Replies View RelatedI reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
View 2 Replies View RelatedMy computer operated windows XP sp2, and have 3 hard drives conntected
1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
View 14 Replies View Relatedabout two yrs ago my dad made a massive mistake of making two partitions on my laptop, and giving the C: only 2gigs of the partition, and the D: 28-29gigs. I wanted to format my computer completely anyways, and would like to know how i can format my computer and merge these two partitions. I have the formatting disks, but it never goes to a screen asking me about my partitions, it just formats everything on my C: (my default drive), but keeps everything on my D: intact (games, files, etc.).
View 8 Replies View RelatedRecently upgraded my laptop to windows XP from ME. I first replaced my 5 gig hard drive with a 20 gig hard drive. I added another 128 memory module for a total of 256. For an old machine it really hums now. Three minor problems are bugging me though. 1. I lost the sounds from my modem. The modem works fine except for no sound. I assume that the sound is from the unimodem half-duplex audio device that is located on the Lucent winmodem. I have checked everything. The system says that it is working correctly. I cannot even find the driver for this on microsoft . I thought if I could load a new driver it might work. No such thing. 2. System restore didn't work until I erased all the memory points and reloaded the program. Now if I open siystem restore and click on "settings" or "help" System restore shuts down. I assume it is corrupted and would like to reload it.
View 2 Replies View Relatedit found the virus on the F hdd which u guys know its not the main one ...it was(virus) found on a folder i can't even see i have the "show hidden folders" on so why can't i see those folders ? i am more worried about that than the virus since my software found it im okay with it lol but i just reinstalled my os and i get a virus found on a folder i didn't know xcisted wtfuge ! ! and i have folder that are just named kinda like this "5e56dc46768be0474974c759ab4690" on some hdd any ideas? oh and i can't erase them why?
View 5 Replies View Related