Installation Did Not Find Harddrive - Desktop Can'tboot Up
Jul 26, 2005
My desktop cannot boot up. I tried to reinstall windows XP.My BIOS (setup) can recognize the hard drive. but when I use OS CD reinstall XP, after loading files, chose continue install XP, I got error message, cannot find hard drive. the only option is F3 to quit installation. and my hard drive had click sound now..I doubt hard drive had some problem. I had did chkdsk from recovery console, but only 52% complete, chkdsk utility exit with "some part cannot recovered" message. why BIOS can see hard drive, but installation software cannot
find hard drive...
View 4 Replies
ADVERTISEMENT
Aug 18, 2010
My computers motherboard got fried a while back so I got a new one installed from a pc shop. They also reinstalled xp for me. Been working fine up until recently when I had to update norton. Once I installed my new norton and tried updating its protection it completely collapsed my xp so I had to try and re install xp mysellf only to find the same symptoms that many other xp installers appear to be suffering from. On installation process my hard drive was not detected. I tried other routes such as changing the bios settings disable sata control in the peripheral settings and I also tried making my own xp install cd including the drivers needed for the xp installl to be able to detect the hard drive but was unsuccesssful.
View 1 Replies
View Related
Aug 28, 2005
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
View 1 Replies
View Related
Feb 25, 2007
I want to clean my computer and decided to install XP. After booting from cd I chose 'install XP' and enter. After a moment I got a blue screen saying windows failed to discover a hardrive. My computer works perfectly.When I go to my comp's bios my primary IDE master is my dvd drive. I have no primary slave, or secondary master/slave. I see no SATA options.I have a Maxtor 64160m0 SCSI hardrive.
View 13 Replies
View Related
Oct 26, 2007
I just purchased a new hard drive and when I boot to the XP Pro CD I press Enter to install XP but I get the following screen. "Setup did not find any hard disk drives installed in your computer". This is the only hard drive in the system.
When it first boots up I see Award Modular BIOS v6.00PG then it detects the Main Processor then detects IDE Drives GigaRAID BIOS V1.36 F/W Ver 02093030 it detects the new hard drive in Drive 1 - IDE 1 then siI 3112A SATALink Host Controller Bios Version 4.2.00 It doesnt find a primary drive
View 2 Replies
View Related
Mar 13, 2008
I have just bought a new hard drive, partitioned it, and had some stuff copied to it.I then deleted the partitions, and set some new ones up (was changing the size of the partitions). I havent put anything on the disk yet.Then, i realise i want some of the stuff (new emails i just received using mozilla) that is on my new disk, prior to me changing the partitions.Is there any way of checking what is on the new disk? I assume windows hasnt actually written over the stuff that i just put on ther
View 3 Replies
View Related
Jun 30, 2005
can anyone out there tell me how to fix this
View 2 Replies
View Related
Mar 27, 2006
How do I find the product key on my WinXP Home Operating System loaded on my hard drive.I know on Win98 its simply a question of typing in regedit and then productkey
But I can't do this with XP home. How do I find the product key?
View 4 Replies
View Related
Sep 5, 2010
We got a hand me down gateway for daughter and we had to reformat the hard-drive. I came to find out was missing the third disk on Gateway's "System Restoration Kit" disks. They no longer provide them anymore, since out of warranty. I was going to just install full version of XP (just had Win ME, when reformatted). It's telling me "No Hard disk error". I tried going into BIOS, hitting F10 on boot up. But there's no Sata settings in my bios. It's a "Phoenix Bios" system.
View 1 Replies
View Related
May 17, 2007
i have xp pro sp2 on a disc and when i try to install it, i get to the partition screen and it shows i have only one drive, with 2gb on it, in FAT format, which is my USB drive i have plugged in,then below it, it says theres an unknown disk in there, no drive is plugged in (or something like that). So, it wont let me reformat my main drive and install xp on it. I have vista x64 already on it and i wanna go back to XP. When i use my Vista install disk, it can find the disk and format it easily. So would it be possible to format it using the vista disk, then restart with xp disk in and boot from there?
View 13 Replies
View Related
Dec 6, 2007
I have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies
View Related
Sep 11, 2005
I have two computers in my home connected through a hard wired router. One uses Windows XP Home Edition (my wife's computer) and one uses Windows XP Pro. The PC with the Pro edition has two logical drives. One is very small (3GB) and I only use it to back up my other drives. It also uses Windows XP Pro as the OS. This is my E: drive. From my C: drive, I can 'see' my other PC (my wife's computer) which I want to back up. However, from my E: drive, I cannot 'see' my other PC. Therefore, I can't map it to my backup software. I CAN ping my wife's computer soI know it can be seen that way. This is probably a quirk between the Home Edition and the Pro edition.
View 34 Replies
View Related
Feb 4, 2009
I have recently built a gigabyte 770 modo with SATA harddrive. When I try to reboot with the XP cd to intall, everything went fine but when the system restart in harddrive, it is giving me disc error.
View 2 Replies
View Related
May 6, 2008
running XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies
View Related
Jun 1, 2008
Im running windows XP and I decided to partion my harddrive into 2. One for windows and one for general stuff.
I left my computer off for a week and when I returned my "general" partion of hard disk space has disappeared, and when opening programs it "cant find the link." I have no idea why its done this.
View 1 Replies
View Related
Apr 8, 2006
Where are the installation files located on the XP CD? So I can copy the files to the hard drive, and then install XP off the Hard Drive.
View 6 Replies
View Related
Oct 8, 2006
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
View 7 Replies
View Related
Feb 2, 2010
I've got three exactly the same computers (HP and also all the components are identical). They came with new, unformatted, HD's. When I got them I formatted the HD's and installed Windows XP Professional (no SP) and everything worked fine.I now wanted to make a fresh start, so I formatted the HD's once again and installed Windows XP Professional (SP3). After this install I noticed that a number of devices weren't working. I checked the device manager and saw the audio device, ethernet port and video controller in the list, but with a yellow exclamation mark. It saw the devices, but it didn't install the drivers.
View 36 Replies
View Related
Aug 29, 2006
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
View 2 Replies
View Related
Jul 30, 2007
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
View 2 Replies
View Related
May 26, 2008
My computer operated windows XP sp2, and have 3 hard drives conntected
1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
View 2 Replies
View Related
Oct 1, 2009
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
View 14 Replies
View Related
Feb 21, 2010
I continue to get the same error everytime I try to install my HP Officejet 6500: An error occured during the installation of the device. The system cannot find the file specified
View 2 Replies
View Related
Aug 5, 2010
I plugged in my WD passport external hard drive into my USB port on my pc that has a newly installed copy of windows xp professional. The new hardware installer pops up, I chose the auto find drivers. Then it copied over called Initio. After that I got another little window asking to give the location of this missing file ivusbWxp86.sys.
View 11 Replies
View Related
May 23, 2005
about two yrs ago my dad made a massive mistake of making two partitions on my laptop, and giving the C: only 2gigs of the partition, and the D: 28-29gigs. I wanted to format my computer completely anyways, and would like to know how i can format my computer and merge these two partitions. I have the formatting disks, but it never goes to a screen asking me about my partitions, it just formats everything on my C: (my default drive), but keeps everything on my D: intact (games, files, etc.).
View 8 Replies
View Related
Feb 19, 2005
Recently upgraded my laptop to windows XP from ME. I first replaced my 5 gig hard drive with a 20 gig hard drive. I added another 128 memory module for a total of 256. For an old machine it really hums now. Three minor problems are bugging me though. 1. I lost the sounds from my modem. The modem works fine except for no sound. I assume that the sound is from the unimodem half-duplex audio device that is located on the Lucent winmodem. I have checked everything. The system says that it is working correctly. I cannot even find the driver for this on microsoft . I thought if I could load a new driver it might work. No such thing. 2. System restore didn't work until I erased all the memory points and reloaded the program. Now if I open siystem restore and click on "settings" or "help" System restore shuts down. I assume it is corrupted and would like to reload it.
View 2 Replies
View Related
Oct 8, 2007
I have problem in my personal computer,i have installed fresh Operating System XP and was running fine.But i was surprise when in login with any user account i cannot find desktop nor taskbar.Searched in google for help but it doesn't help.Looking for your valuable support.
View 14 Replies
View Related
Oct 13, 2009
I'm currently trying to transition from XP to 7, and I want to keep the same image, but I saved it from a website, (right click: use as background), and can't find where it was stored. This would be a problem, but the site went down, and i've tried to find it for hours.
View 1 Replies
View Related
Nov 6, 2006
I just reset my computer to factory shipped conditions because it was not working. But now anytime i try to do anything ts nohe message c:Documents and setting sowner desktop is not available or can not find active desktop keeps popping up and i have no idea how to fix it because i cant even load in my spyware programs.
View 1 Replies
View Related
Aug 30, 2006
where i can find some good desktop themes for windows xp? Im picky seeing how there are only 3 colors (green,silver, and blue) that windows lets you choose. I've tried googling but i could only find ones where you had to pay.. So does anybody know any good FREE ones?
View 3 Replies
View Related
Nov 3, 2009
I just installed IE7 over IE6, but I cannot seem to find IE listed in Add/Remove Programs or in the Start Programs menu. How can I find it and get the shortcut icon on the desktop? Also, I need the shortcut for WinXP 'shutdown'.
View 8 Replies
View Related
