Can't Find New Harddrive - Primary Drive
Oct 26, 2007
I just purchased a new hard drive and when I boot to the XP Pro CD I press Enter to install XP but I get the following screen. "Setup did not find any hard disk drives installed in your computer". This is the only hard drive in the system.
When it first boots up I see Award Modular BIOS v6.00PG then it detects the Main Processor then detects IDE Drives GigaRAID BIOS V1.36 F/W Ver 02093030 it detects the new hard drive in Drive 1 - IDE 1 then siI 3112A SATALink Host Controller Bios Version 4.2.00 It doesnt find a primary drive
View 2 Replies
ADVERTISEMENT
Aug 28, 2005
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
View 1 Replies
View Related
May 6, 2008
running XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies
View Related
Jan 2, 2005
I have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies
View Related
Feb 3, 2010
Dell Dimension 4100 desk top Bios version AO6 Information on Primary IDE master-Primary slave are showing not installed how can I fix this without these computer will not boot up since OS is on primary master drive
View 2 Replies
View Related
Aug 18, 2010
My computers motherboard got fried a while back so I got a new one installed from a pc shop. They also reinstalled xp for me. Been working fine up until recently when I had to update norton. Once I installed my new norton and tried updating its protection it completely collapsed my xp so I had to try and re install xp mysellf only to find the same symptoms that many other xp installers appear to be suffering from. On installation process my hard drive was not detected. I tried other routes such as changing the bios settings disable sata control in the peripheral settings and I also tried making my own xp install cd including the drivers needed for the xp installl to be able to detect the hard drive but was unsuccesssful.
View 1 Replies
View Related
Mar 13, 2008
I have just bought a new hard drive, partitioned it, and had some stuff copied to it.I then deleted the partitions, and set some new ones up (was changing the size of the partitions). I havent put anything on the disk yet.Then, i realise i want some of the stuff (new emails i just received using mozilla) that is on my new disk, prior to me changing the partitions.Is there any way of checking what is on the new disk? I assume windows hasnt actually written over the stuff that i just put on ther
View 3 Replies
View Related
Jun 30, 2005
can anyone out there tell me how to fix this
View 2 Replies
View Related
Mar 27, 2006
How do I find the product key on my WinXP Home Operating System loaded on my hard drive.I know on Win98 its simply a question of typing in regedit and then productkey
But I can't do this with XP home. How do I find the product key?
View 4 Replies
View Related
Sep 5, 2010
We got a hand me down gateway for daughter and we had to reformat the hard-drive. I came to find out was missing the third disk on Gateway's "System Restoration Kit" disks. They no longer provide them anymore, since out of warranty. I was going to just install full version of XP (just had Win ME, when reformatted). It's telling me "No Hard disk error". I tried going into BIOS, hitting F10 on boot up. But there's no Sata settings in my bios. It's a "Phoenix Bios" system.
View 1 Replies
View Related
Mar 30, 2006
I did a reformat of my computer. I disconnected my external drive but I also had a smaller drive (internal) labeled D that I use. Well, I just noticed after installing all software and updates that for some reason the C drive is now labeled D and vice versa. Why did this occur and can I change it. I always heard the primary drive should be labeled C.
View 1 Replies
View Related
May 17, 2007
i have xp pro sp2 on a disc and when i try to install it, i get to the partition screen and it shows i have only one drive, with 2gb on it, in FAT format, which is my USB drive i have plugged in,then below it, it says theres an unknown disk in there, no drive is plugged in (or something like that). So, it wont let me reformat my main drive and install xp on it. I have vista x64 already on it and i wanna go back to XP. When i use my Vista install disk, it can find the disk and format it easily. So would it be possible to format it using the vista disk, then restart with xp disk in and boot from there?
View 13 Replies
View Related
Jul 26, 2005
My desktop cannot boot up. I tried to reinstall windows XP.My BIOS (setup) can recognize the hard drive. but when I use OS CD reinstall XP, after loading files, chose continue install XP, I got error message, cannot find hard drive. the only option is F3 to quit installation. and my hard drive had click sound now..I doubt hard drive had some problem. I had did chkdsk from recovery console, but only 52% complete, chkdsk utility exit with "some part cannot recovered" message. why BIOS can see hard drive, but installation software cannot
find hard drive...
View 4 Replies
View Related
Dec 6, 2007
I have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies
View Related
Sep 11, 2005
I have two computers in my home connected through a hard wired router. One uses Windows XP Home Edition (my wife's computer) and one uses Windows XP Pro. The PC with the Pro edition has two logical drives. One is very small (3GB) and I only use it to back up my other drives. It also uses Windows XP Pro as the OS. This is my E: drive. From my C: drive, I can 'see' my other PC (my wife's computer) which I want to back up. However, from my E: drive, I cannot 'see' my other PC. Therefore, I can't map it to my backup software. I CAN ping my wife's computer soI know it can be seen that way. This is probably a quirk between the Home Edition and the Pro edition.
View 34 Replies
View Related
Aug 23, 2010
I am trying to replace a failinf IDE drive with a SATA replacement. How do I make it bootable? I am using an ABIT VA-10 mobo, Win XP SP3, 1.5 GB DDR333 Ram, and a mix n' match collection of IDE and SATA HDD's?
I cannot seem to get the mobo to recognize the SATA which is plugged into the primary IDE slot via a Silicon Graphics 680 adapter board. This of course fouls up my ability to boot from a CDROM drive as my secondary IDE port is supporting the original WD IDE drive and a Seagate Barracuda 7200.12 SATA drive. At one point I was able to boot from either the primary master or the 2nd master. I have fiddled with XXclone and cannot seem to get the machine to recognize the Sata drive any more.
View 3 Replies
View Related
Jul 1, 2010
Can I just put a Samsung HD253GJ with Windows XP Pro w/ Service Pack 3 preloaded hard drive in a dell p-490 as the primary drive. Plug and play or...what would i need to do?
View 6 Replies
View Related
Oct 12, 2006
I had a two seperate versions of windows installed on two seperate hard drives, when i turn the computer on it asks me which one i want to boot from. well the second hard drive is now dying and somtimes it tells me DISK BOOT FAILURE, INSERT BOOT DISK AND PRESS ENTER. now this only happends when the second hard drive doesnt work. I have tried to just unplug the second drive to see if it would boot off of the original copy on the first drive but i get the same thing.
View 7 Replies
View Related
Mar 6, 2010
I was about to reformat my C: (that has an nonworking windows partition) from my current partition D:. I went to my Computer D Management and it said that my C: was a primary partition [green] while my current one was a logic partition blue.boxed in green. Someone at Yahoo! Answers said not reformat the C: because it would screw up my D; Drive. Is it safe? What should I do? I just wish to use my C drive for data storage and my D drive as a Windows partition.
View 14 Replies
View Related
Mar 25, 2006
Is there a way to partition the primary disk on a computer without reformatting?A computer that I inherited (HP Pavillion) has a 120Gb hard drive partitioned into two sections C drive 104Gb NTFS primary D drive 7Gb FAT32 recovery I would like to split the primary into two sections, if possible without reformatting
View 3 Replies
View Related
Jul 6, 2004
I created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies
View Related
Jul 23, 2009
My problem is a result of a long series of attempts to fix a corrupt Windows registry file. A few days ago I booted my laptop and received a blue screen error: c0000218, relating to a corrupt Windows registry file. Windows could not load. After a lot of searching online I found a way to manually replace this and four other related files from the c:WindowsRepair folder using the command prompt.
This process seemed to work and Windows began to load. I then received a lsass.exe error saying something about invalid passwords. My laptop began an infinite cycle of restarting itself. I looked up the lsass.exe error and people seemed to think it was unrecoverable. As my hard drive was reasonably small (100g) and had been showing some signs of problems I decided to just buy a new one. I went out and purchased a new 320g 2.5" hard drive along with a 2.5" USB drive enclosure and another 1g stick of RAM......
View 6 Replies
View Related
May 16, 2006
I changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies
View Related
Mar 20, 2007
I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Jun 1, 2008
Im running windows XP and I decided to partion my harddrive into 2. One for windows and one for general stuff.
I left my computer off for a week and when I returned my "general" partion of hard disk space has disappeared, and when opening programs it "cant find the link." I have no idea why its done this.
View 1 Replies
View Related
Jul 23, 2005
I would like to know if I can copy my whole hard drive to a backup hard drive. What I would like to do is buy a new hard drive for my laptop. Then move all and I do mean everything windows XP etc. to the new hard drive. So that I could the start using the new hard drive just like the old hard drive. I think my old hard drive is going bad.
View 7 Replies
View Related
Oct 24, 2006
I'm running a sata hard drive and cannot use ide drive .I have a MSI neo2 7025 board i installed a 36gig10,000 sata drive and made it my main drive and wanted to use 250 gig drive as slave but when i hook it up the computer will not fire up . so i went to set up and look for the ide drive and it did not show any ide drives.
View 7 Replies
View Related
Oct 2, 2009
My computer came with a 80gb HD with windows xp pro.. I had took a 180gb hd from another comp. that was running windows xp home and connected it as a slave drive. A window popped warning me that vital info. would be deleted in order to format/ partition the second drive (180gb HD). Was this a mistake doing it in this manner? If not...How would I go about using the whole "180gb" and not just the 35gb it's only allowing me to use. And is there any way to move files so that they will be protected?
View 2 Replies
View Related
Aug 29, 2006
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
View 2 Replies
View Related
Jul 30, 2007
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
View 2 Replies
View Related
