Find Stuff On Harddrive After Re-partitioning
Mar 13, 2008
I have just bought a new hard drive, partitioned it, and had some stuff copied to it.I then deleted the partitions, and set some new ones up (was changing the size of the partitions). I havent put anything on the disk yet.Then, i realise i want some of the stuff (new emails i just received using mozilla) that is on my new disk, prior to me changing the partitions.Is there any way of checking what is on the new disk? I assume windows hasnt actually written over the stuff that i just put on ther
View 3 Replies
ADVERTISEMENT
Mar 3, 2008
I am having xp in my c partition in my hard drive,if i copy windows 2003 from another hard disk to another partition means the two partition will work fine or not? shall i use windows xp & windows 2003 server.may i able to boot from both xp & windows 2003
View 2 Replies
View Related
Aug 28, 2005
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
View 1 Replies
View Related
Aug 18, 2010
My computers motherboard got fried a while back so I got a new one installed from a pc shop. They also reinstalled xp for me. Been working fine up until recently when I had to update norton. Once I installed my new norton and tried updating its protection it completely collapsed my xp so I had to try and re install xp mysellf only to find the same symptoms that many other xp installers appear to be suffering from. On installation process my hard drive was not detected. I tried other routes such as changing the bios settings disable sata control in the peripheral settings and I also tried making my own xp install cd including the drivers needed for the xp installl to be able to detect the hard drive but was unsuccesssful.
View 1 Replies
View Related
Oct 26, 2007
I just purchased a new hard drive and when I boot to the XP Pro CD I press Enter to install XP but I get the following screen. "Setup did not find any hard disk drives installed in your computer". This is the only hard drive in the system.
When it first boots up I see Award Modular BIOS v6.00PG then it detects the Main Processor then detects IDE Drives GigaRAID BIOS V1.36 F/W Ver 02093030 it detects the new hard drive in Drive 1 - IDE 1 then siI 3112A SATALink Host Controller Bios Version 4.2.00 It doesnt find a primary drive
View 2 Replies
View Related
Jun 30, 2005
can anyone out there tell me how to fix this
View 2 Replies
View Related
Mar 27, 2006
How do I find the product key on my WinXP Home Operating System loaded on my hard drive.I know on Win98 its simply a question of typing in regedit and then productkey
But I can't do this with XP home. How do I find the product key?
View 4 Replies
View Related
Sep 5, 2010
We got a hand me down gateway for daughter and we had to reformat the hard-drive. I came to find out was missing the third disk on Gateway's "System Restoration Kit" disks. They no longer provide them anymore, since out of warranty. I was going to just install full version of XP (just had Win ME, when reformatted). It's telling me "No Hard disk error". I tried going into BIOS, hitting F10 on boot up. But there's no Sata settings in my bios. It's a "Phoenix Bios" system.
View 1 Replies
View Related
May 17, 2007
i have xp pro sp2 on a disc and when i try to install it, i get to the partition screen and it shows i have only one drive, with 2gb on it, in FAT format, which is my USB drive i have plugged in,then below it, it says theres an unknown disk in there, no drive is plugged in (or something like that). So, it wont let me reformat my main drive and install xp on it. I have vista x64 already on it and i wanna go back to XP. When i use my Vista install disk, it can find the disk and format it easily. So would it be possible to format it using the vista disk, then restart with xp disk in and boot from there?
View 13 Replies
View Related
Jul 26, 2005
My desktop cannot boot up. I tried to reinstall windows XP.My BIOS (setup) can recognize the hard drive. but when I use OS CD reinstall XP, after loading files, chose continue install XP, I got error message, cannot find hard drive. the only option is F3 to quit installation. and my hard drive had click sound now..I doubt hard drive had some problem. I had did chkdsk from recovery console, but only 52% complete, chkdsk utility exit with "some part cannot recovered" message. why BIOS can see hard drive, but installation software cannot
find hard drive...
View 4 Replies
View Related
Dec 6, 2007
I have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies
View Related
Sep 11, 2005
I have two computers in my home connected through a hard wired router. One uses Windows XP Home Edition (my wife's computer) and one uses Windows XP Pro. The PC with the Pro edition has two logical drives. One is very small (3GB) and I only use it to back up my other drives. It also uses Windows XP Pro as the OS. This is my E: drive. From my C: drive, I can 'see' my other PC (my wife's computer) which I want to back up. However, from my E: drive, I cannot 'see' my other PC. Therefore, I can't map it to my backup software. I CAN ping my wife's computer soI know it can be seen that way. This is probably a quirk between the Home Edition and the Pro edition.
View 34 Replies
View Related
May 6, 2008
running XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies
View Related
Jun 1, 2008
Im running windows XP and I decided to partion my harddrive into 2. One for windows and one for general stuff.
I left my computer off for a week and when I returned my "general" partion of hard disk space has disappeared, and when opening programs it "cant find the link." I have no idea why its done this.
View 1 Replies
View Related
Aug 29, 2006
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
View 2 Replies
View Related
Jul 30, 2007
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
View 2 Replies
View Related
May 26, 2008
My computer operated windows XP sp2, and have 3 hard drives conntected
1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
View 2 Replies
View Related
Oct 1, 2009
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
View 14 Replies
View Related
May 23, 2005
about two yrs ago my dad made a massive mistake of making two partitions on my laptop, and giving the C: only 2gigs of the partition, and the D: 28-29gigs. I wanted to format my computer completely anyways, and would like to know how i can format my computer and merge these two partitions. I have the formatting disks, but it never goes to a screen asking me about my partitions, it just formats everything on my C: (my default drive), but keeps everything on my D: intact (games, files, etc.).
View 8 Replies
View Related
Feb 19, 2005
Recently upgraded my laptop to windows XP from ME. I first replaced my 5 gig hard drive with a 20 gig hard drive. I added another 128 memory module for a total of 256. For an old machine it really hums now. Three minor problems are bugging me though. 1. I lost the sounds from my modem. The modem works fine except for no sound. I assume that the sound is from the unimodem half-duplex audio device that is located on the Lucent winmodem. I have checked everything. The system says that it is working correctly. I cannot even find the driver for this on microsoft . I thought if I could load a new driver it might work. No such thing. 2. System restore didn't work until I erased all the memory points and reloaded the program. Now if I open siystem restore and click on "settings" or "help" System restore shuts down. I assume it is corrupted and would like to reload it.
View 2 Replies
View Related
May 12, 2008
I need to reformat the 60Gb drive on my laptop and I would like to partition my hard drive to kill 2 birds with 1 stone. I wanted to put XP Home in one partition and my docs on another.
1. Would 10Gb for the 1st / XP partition and the remainder for the second partition seem reasonable?
2. I will put the MyDocuments folder on the 2nd partition - do I try and install all programs on the 2nd partition, right? The 'Documents and Settings' folder sits on the 2nd partition also, right? I think I want to keep Windows away from everything, to keep it 'pure'.
3. Will any programs try to deposit temporary files application data in the 1st partition - and do I then shift this data over to the 2nd partition?
View 3 Replies
View Related
Mar 3, 2005
I'm running Home oem and would like to partition my hd. For some reason I didn't seem to be able to when I installed Windows. Do I need to use Partition Magic or can I do it within Windows? I wanna run a dual boot system.
View 6 Replies
View Related
Mar 23, 2006
Is this something I should try through Fdisc or should I buy Partition Commander? I am learning a lot but don't understand all the ins and outs of the articles I have read concerning partitioning, yet.
View 13 Replies
View Related
Jan 19, 2005
I have been reading past messages regarding partitioning a drive.I understand why it's done and am interested in doing this myself. The question I have is my computer came with xp already installed so I have no disc to work with.The computer was of course set with the c drive being large, do I just partition the rest of the available space? If so what is the best way to go about this?I have seen programs recommended and also talk of first needing to make the c drive smaller to start with, but have no idea how I can do this since I am starting after the fact.If someone could explain to me how I might best go about this it might help me put all I've read into perspective. I definitely don't want to mess anything up.
View 6 Replies
View Related
Oct 18, 2004
The question frequently comes up about how to format and install XP from scratch. Following are the steps I take when I get a new system. I mention the "brand names" of software I use not as an endorsement or recommendation, but just for the sake of example.After unpacking and connecting all hardware, here's what I do:1Partition the HD according to my preference, thus deleting everything on the drive (the number and size of partitions is entirely up to the individual user – I prefer several, keeping the OS on c: and various programs, cache folders, swap file and data on other partitions).
View 9 Replies
View Related
Aug 28, 2005
Is there any way to partition a hard drive in two without having to reinstall the OS? Do I have to buy a seperate program to do it? Or does Windows include some sort of utility that does it?
View 15 Replies
View Related
Jul 17, 2005
When I check the properties of the C: drive (4 Gb), it shows only about 270 Mb free space, but when I look through the files, to clear out some space on the drive, I seem only to have about 2 Gb used. I have my settings set to view hidden files and the like, but it seems like I'm using twice the amount of space
View 6 Replies
View Related
Jul 18, 2005
A case of other files in other paritions "spilling over" into the system partition, or does partitioning itself use space that's basically invisible to Windows?
Mike, your setup sounds pretty close to mine. I know I can change the partition sizes, and that's my next plan, but it seems like I've lost 2Gb into the abyss.
View 3 Replies
View Related
Aug 18, 2006
I'm an intermediate user just beginning to study for MS sys admin.Both my laptops run XP home, but I have 2000 Pro from when I had a desktop...which I unfortunately gave to a family member. I'd like to install this on one of my laptops because the Pro capabilities will allow me to "study" a little better than just home XP. At any rate, I'd like the experience of configuring everything. will I lose everything in XP if I set up a partition to install 2000 Pro? Is it even possible to install both of them without installing 2000 first? The XP came pre-loaded on my computer but I do have a disk.
View 4 Replies
View Related
Mar 12, 2007
My personal partitioning scheme is primarily to facilitate a backup routine that I can use easily and regularly. C: drive is 10 GB and holds only my OS; no program files, no data files, no personal settings. E: drive is 58 GB for program files, temporary internet files, downloads and such; no data files. f: drive is 10 GB for Documents and Settings. I: drive is 4 GB and is devoted to a 3 GB fixed pagefile. J: drive is 72 GB for wave files only. K: drive is 8 GB for image files only. L: drive is 30 GB for video editing only. I regularly make images of my C: drive and F: drive. These are my primary backups. Installed program files don't change often. I have my programs' preferences set to store data files on F:. I don't need to backup E: very often; only when I install a new program, or uninstall an old one. Of course, when I make a new image of E:, I also make an image of C: and F: My J: drive is just my CD library ripped to the computer. I still have all the original CD's, so I don't really need to backup this drive very often, either. (I don't care for MP3's). K: drive is the target for my digital camera. I make images of this drive regularly. L: is for temporary use for video editing, and I burn the final edit to DVD, so I don't make images of this drive at all. Defragmenting is quick and easy. Having a permanent pagefile on a dedicated partition keeps it from becoming fragmented. Making backups is simplified, so I actually do it regularly.
And these are backups that will get me up and running in minutes. And before someone says that it won't work properly, I'm sorry but it does. I've tested it extensively, even from one drive to another, and it just works. I used nLite to customize my installation, so programs default to E:, Documents and Settings default to F:. I used internet options in IE7 to relocate temporary internet files for all users on this machine to E: I run AVG Anti-Spyware, Windows Defender, and NOD32 as services for all users, and have nightly scans run automatically-I never turn this machine off. I dump temporary files, defragment, run manual malware scans and HJT before I make an image of any partition. And maybe the best benefit of all? I haven't done a reformat/reinstall since Windows 95.
View 14 Replies
View Related
Aug 3, 2005
I'm partitioning an external hard drive that's connected to my Win XP machine. I set an 80GB partition for XP (NTFS). When I tried to allocate the rest of the drive as a FAT32 partition (for my Win98 machines), FAT32 was not an option, until I reduced the partition size to 20 GB. I'm using XP's Disk Management. Is there a maximum limitation of FAT32 partition size?
View 8 Replies
View Related
