Partitioning Hard Drives
Aug 28, 2005Is there any way to partition a hard drive in two without having to reinstall the OS? Do I have to buy a seperate program to do it? Or does Windows include some sort of utility that does it?
View 15 Replies
ADVERTISEMENT
Partitioning Drives And Free Space
Jul 17, 2005When I check the properties of the C: drive (4 Gb), it shows only about 270 Mb free space, but when I look through the files, to clear out some space on the drive, I seem only to have about 2 Gb used. I have my settings set to view hidden files and the like, but it seems like I'm using twice the amount of space
View 6 Replies View RelatedPartitioning Drives And Free Space
Jul 18, 2005A case of other files in other paritions "spilling over" into the system partition, or does partitioning itself use space that's basically invisible to Windows?
Mike, your setup sounds pretty close to mine. I know I can change the partition sizes, and that's my next plan, but it seems like I've lost 2Gb into the abyss.
Partitioning Hard Drive
Jan 19, 2005I have been reading past messages regarding partitioning a drive.I understand why it's done and am interested in doing this myself. The question I have is my computer came with xp already installed so I have no disc to work with.The computer was of course set with the c drive being large, do I just partition the rest of the available space? If so what is the best way to go about this?I have seen programs recommended and also talk of first needing to make the c drive smaller to start with, but have no idea how I can do this since I am starting after the fact.If someone could explain to me how I might best go about this it might help me put all I've read into perspective. I definitely don't want to mess anything up.
View 6 Replies View RelatedPartitioning External Hard Drive
Aug 3, 2005I'm partitioning an external hard drive that's connected to my Win XP machine. I set an 80GB partition for XP (NTFS). When I tried to allocate the rest of the drive as a FAT32 partition (for my Win98 machines), FAT32 was not an option, until I reduced the partition size to 20 GB. I'm using XP's Disk Management. Is there a maximum limitation of FAT32 partition size?
View 8 Replies View RelatedDual Booting - Second Hard Drive Partitioning
May 12, 2006Recently I installed Ubuntu Linux on a partition on my secondary hard drive (it's a worthwhile education, I'll give it that). Since then, when in Windows, the remaining space, used for games, alternates between being accessible and being unaccessible. What's the go?For example, when I go in My Computer and try to open D: drive this is the message i receive:D: is not accessible The parameter is incorrect.
View 3 Replies View RelatedUnable To Defragment Hard Disk After Re-partitioning?
Aug 27, 2005If I partition my hard drive and want to append a partion to the windows xp partition can this be done.Also If I am having problemsdefraging a partition (it say's something about a retore file on it) but this partition does not have an operation system. I just use it to keep web sites I develop on it. How can I defrag it.
View 10 Replies View RelatedPartitioning Primary Hard Disk Drive Without Reformatting?
Mar 25, 2006Is there a way to partition the primary disk on a computer without reformatting?A computer that I inherited (HP Pavillion) has a 120Gb hard drive partitioned into two sections C drive 104Gb NTFS primary D drive 7Gb FAT32 recovery I would like to split the primary into two sections, if possible without reformatting
View 3 Replies View RelatedPartitioning 40gb Hard Disk: Selecting FAT32 Or NTFS?
Aug 18, 2005i put fat32 on partition 1 and NTFS on partition 2 on the same hard drive can that be why my system isnt running good because i just installed windows xp on a formatted hard drive and it runs poorly. or can anybody tell me the best way to partition a 40 gig harddrive to get the most out of it....? I thought there was something wrong with my windows xp disk because out of all the times i have fdisk and reinstalled windows it never ran this bad...
View 14 Replies View RelatedInstalling New Hard Drive - Partitioning And Drive Letter Issues
Nov 22, 2009I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedInstalling New Hard Drive - Partitioning And Drive Letter
Feb 3, 2008not being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies View RelatedHaving A Hard Time With External Hard Drives
Mar 4, 2008I had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
View 2 Replies View RelatedTwo Hard Drives
Oct 10, 2008I just installed a 320gb I had around in a spare PC. I was reading up on jumping everything and understood that I should set the main HD as master and the spare HD as slave on the primary IDE connector, then set my DVD drive as CS on the secondary.My problem is that the master and slave connectors on the ribbon cable aren't long enough to reach both drives.(only places the drives will fit) So I hooked everything up CS while I put the main HD on the primary IDE and then hooked the DVD and spare drive on the secondary IDE. Everything seems to work fine and I can see both drives and everything, but on bootup I have to go into the boot menu and pick the main HD to boot. Is it safe to run everything this way? And if so how do I fix the booting issue?
View 6 Replies View RelatedMissing 1 Of 2 Hard Drives
Mar 28, 2006I have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies View RelatedMissing Hard Drives
May 31, 2006I am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies View RelatedBooting From Two Hard Drives
Dec 30, 2008I was wondering if there is any way to boot my new Windows XP computer off of an old Windows 98 Hard Drive without screwing anything up. What I am trying to do is access and run a program that was installed on the WIN 98 Hard Drive. The software was an expensive Patent Software and I no longer have the installation disk.Here is what I have already tried:1. Connected the WIN98 hard drive to my XP Computer and booted up. Computer started to boot into WIN98 but came back with some kind of memory error and shut down.2. Tried running the software from the WIN98 Drive in WINXP but came back with an error about missing DLL files.Someone mentioned running the drive as a virtual machine.
View 1 Replies View RelatedBooting From Different Hard Drives
Mar 20, 2007I think I have a simple question....maybe not. All I want to do is boot to XP home located on different drives, one older, one newer but both with SP2Just built new computer (first time builder) I installed three hard drives, drive H is a new boot disk with XP home, drive C is a storage disk from old computer and disk L is the older boot disk with XP home (reformatted within the past year). The MB assigned the drive letters, not me.H and C are slave and master on Primary IDE, L is Master attached to a PCI card.I want to boot from L. Boot sequence does not recognize L but it does offer the option of booting from OTHER DEVICE so I disable all drives (including H,C and two dvd drives) but it still boots to the new H drive.The bios does not recognize drive L (I guess cause its attached to the PCI card?). My thinking is that if I set up L directly to MB and switch one of the DVD drives to the PCI card it will work.If I do that then I think the MB will recognize drive L and allow me to set it up in the boot sequence the same way that the new drive works.I don't know what I should worry about BUT I am sure that I don't know what will go wrong.
View 2 Replies View RelatedNew Computer Using Old Hard Drives
Jan 18, 2007I'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
View 3 Replies View RelatedHard Drives Have Locked Up
Aug 8, 2007I have filled my other hard drive with so much junk that it won't even load up anymore, and so it just doesn't come on and it was windows xp. Does any body know how I would wipe, or reformat it? One last question, I have another hard drive, its empty and I don't think its formatted. If I were to use it as the primary hard drive and use my XP boot cd, would it install?
View 10 Replies View RelatedLocation Of Hard-Drives
Sep 1, 2010where can I find the location of my Hard-Drive Partitions? I don't mean as in My Computer and double click, Microsoft Windows XP Professional Backup" /noexecute=optin. That sort of data, so I can add my windows 7 OS to the Boot Screen.
View 15 Replies View RelatedLow Disk Space On First Of Two Hard Drives
Feb 28, 2005Problem with low disk space on the 1st of 2 hard drives. This hard drive is only 4 GB, and is my master drive. I have moved as many files as I possibly can to the second (larger) hard drive, without uninstalling and reinstalling all my programs.
Is there any way to simply get any "overflow" to "fall into" the other drive.
Both Hard Drives Arent Recognized
Mar 21, 2008
everytime i start my pc i get the following message:
error auto-sensing primary hard disk drive 0 strike the f1 key to continue, f2 to run the setup utility.
when i push f1 the same message will pop up.if i go into the setup utility and look at the primary drive 0 it says hard drive.it stands on auto but it doesnt show the capacity.
the same thing with the secondary rive 1.i have 2 hard drives.1 with 20 gig and the second 1 with 250 gig.both arent recognized by my pc.i cant format the pc cause i dont have hard drives to install xp on >.<
Won't Recognize One Of My Hard Drives Connected By USB
Apr 26, 2007I have a computer running Windows XP PRO SP2 with 2, 250gb hard drives. The operating system and programs are on the C drive and the second drive which is removable is supposed to be for my data, but Windows doesn't recognize it so I can't use it. Right now I have my data on an external hard drive, connected by USB.
The second hard drive is new from my manufacturer (I have a custom computer and this is a replacement hard drive--the original was faulty) and I haven't put anything on it yet. When I first put it in my machine, I was able to see it in "My Computer". The next day when I was ready to start copying my data over, it was nowhere to be found. I turned off the machine, pulled out the drive and put it back and rebooted--still no show.
Have More Than One Copy Of XP On Same Computer With Two Hard Drives?
Mar 29, 2007Can you have more than one copy of XP on the same computer with two hard drives, that can be validated please.
View 14 Replies View RelatedTransferring Hard Drives To Another Computer
Sep 23, 2006I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
View 10 Replies View RelatedCannot Access Hard Drives From My Computer
Dec 5, 2006I was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
View 11 Replies View RelatedStart Up Choice From 2 Hard Drives
Oct 30, 2006Is there any way I can be given a choice of which Hard Drive I can startup on when I turn on my computer if I put 2 individual Hard drives in it?If there is, I will purchase another copy of XP but I need to know before going to the expense of buying another XP operating system.
View 7 Replies View RelatedBooting - Freeze Up - First Set Of Hard Drives
Jan 12, 2007I was working on the computer yesterday when it froze up on me. I didn't think much of it, so I rebooted and continued what I was doing. Later that same day, the computer locked up about 2-3 more times. Then I started hearing ticking noises coming from inside. I shut it off after it froze again. When I powered it back on, the screen during bootup that displays my Hard drive's status (I have four HDs, paired up with one another), says that the first set of hard drives (which is where the OS is on) is healthy, and on the other set, it gets an error with red text. I rebooted, and sure enough, they were both healthy again.
This is where it messes up. It starting loading the Windows logo, with the progress bar. The next thing it does is go black. It doesn't boot at all after that. I have to reboot everytime. I then tried to boot in safe mode. Black screen again. I tried all the possible options in the boot menu, none of them worked. That's where my first problem takes off. So I now have a non-booting OS. The next thing I do is insert the Windows boot disk, and installed Windows XP on the same HD the original OS was on (Don't ask why, I don't know either). After the installation, Windows booted up fine, except I was running on a fresh install. Which how I'm on this site...........
Dual Boot Between To Different Hard Drives - Both Pro
Jul 23, 2003Is it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
View 2 Replies View RelatedCould Not Find Any Hard Drives On Computer
Dec 4, 2005I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
Have 2 Hard Drives C & D/ Win - Running Out Of Space In Drive C
Jun 19, 2005What is the best way to get more space on my C drive? Merge C & D drives to optomize space? and how can that be done
View 3 Replies View Related