where can I find the location of my Hard-Drive Partitions? I don't mean as in My Computer and double click, Microsoft Windows XP Professional Backup" /noexecute=optin. That sort of data, so I can add my windows 7 OS to the Boot Screen.
View 15 RepliesI had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
View 2 Replies View RelatedI just installed a 320gb I had around in a spare PC. I was reading up on jumping everything and understood that I should set the main HD as master and the spare HD as slave on the primary IDE connector, then set my DVD drive as CS on the secondary.My problem is that the master and slave connectors on the ribbon cable aren't long enough to reach both drives.(only places the drives will fit) So I hooked everything up CS while I put the main HD on the primary IDE and then hooked the DVD and spare drive on the secondary IDE. Everything seems to work fine and I can see both drives and everything, but on bootup I have to go into the boot menu and pick the main HD to boot. Is it safe to run everything this way? And if so how do I fix the booting issue?
View 6 Replies View RelatedI have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies View RelatedI am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies View RelatedI was wondering if there is any way to boot my new Windows XP computer off of an old Windows 98 Hard Drive without screwing anything up. What I am trying to do is access and run a program that was installed on the WIN 98 Hard Drive. The software was an expensive Patent Software and I no longer have the installation disk.Here is what I have already tried:1. Connected the WIN98 hard drive to my XP Computer and booted up. Computer started to boot into WIN98 but came back with some kind of memory error and shut down.2. Tried running the software from the WIN98 Drive in WINXP but came back with an error about missing DLL files.Someone mentioned running the drive as a virtual machine.
View 1 Replies View RelatedI think I have a simple question....maybe not. All I want to do is boot to XP home located on different drives, one older, one newer but both with SP2Just built new computer (first time builder) I installed three hard drives, drive H is a new boot disk with XP home, drive C is a storage disk from old computer and disk L is the older boot disk with XP home (reformatted within the past year). The MB assigned the drive letters, not me.H and C are slave and master on Primary IDE, L is Master attached to a PCI card.I want to boot from L. Boot sequence does not recognize L but it does offer the option of booting from OTHER DEVICE so I disable all drives (including H,C and two dvd drives) but it still boots to the new H drive.The bios does not recognize drive L (I guess cause its attached to the PCI card?). My thinking is that if I set up L directly to MB and switch one of the DVD drives to the PCI card it will work.If I do that then I think the MB will recognize drive L and allow me to set it up in the boot sequence the same way that the new drive works.I don't know what I should worry about BUT I am sure that I don't know what will go wrong.
View 2 Replies View RelatedI'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
View 3 Replies View RelatedI have filled my other hard drive with so much junk that it won't even load up anymore, and so it just doesn't come on and it was windows xp. Does any body know how I would wipe, or reformat it? One last question, I have another hard drive, its empty and I don't think its formatted. If I were to use it as the primary hard drive and use my XP boot cd, would it install?
View 10 Replies View RelatedIs there any way to partition a hard drive in two without having to reinstall the OS? Do I have to buy a seperate program to do it? Or does Windows include some sort of utility that does it?
View 15 Replies View RelatedProblem with low disk space on the 1st of 2 hard drives. This hard drive is only 4 GB, and is my master drive. I have moved as many files as I possibly can to the second (larger) hard drive, without uninstalling and reinstalling all my programs.
Is there any way to simply get any "overflow" to "fall into" the other drive.
everytime i start my pc i get the following message:
error auto-sensing primary hard disk drive 0 strike the f1 key to continue, f2 to run the setup utility.
when i push f1 the same message will pop up.if i go into the setup utility and look at the primary drive 0 it says hard drive.it stands on auto but it doesnt show the capacity.
the same thing with the secondary rive 1.i have 2 hard drives.1 with 20 gig and the second 1 with 250 gig.both arent recognized by my pc.i cant format the pc cause i dont have hard drives to install xp on >.<
I have a computer running Windows XP PRO SP2 with 2, 250gb hard drives. The operating system and programs are on the C drive and the second drive which is removable is supposed to be for my data, but Windows doesn't recognize it so I can't use it. Right now I have my data on an external hard drive, connected by USB.
The second hard drive is new from my manufacturer (I have a custom computer and this is a replacement hard drive--the original was faulty) and I haven't put anything on it yet. When I first put it in my machine, I was able to see it in "My Computer". The next day when I was ready to start copying my data over, it was nowhere to be found. I turned off the machine, pulled out the drive and put it back and rebooted--still no show.
Can you have more than one copy of XP on the same computer with two hard drives, that can be validated please.
View 14 Replies View RelatedI have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
View 10 Replies View RelatedI was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
View 11 Replies View RelatedIs there any way I can be given a choice of which Hard Drive I can startup on when I turn on my computer if I put 2 individual Hard drives in it?If there is, I will purchase another copy of XP but I need to know before going to the expense of buying another XP operating system.
View 7 Replies View RelatedI was working on the computer yesterday when it froze up on me. I didn't think much of it, so I rebooted and continued what I was doing. Later that same day, the computer locked up about 2-3 more times. Then I started hearing ticking noises coming from inside. I shut it off after it froze again. When I powered it back on, the screen during bootup that displays my Hard drive's status (I have four HDs, paired up with one another), says that the first set of hard drives (which is where the OS is on) is healthy, and on the other set, it gets an error with red text. I rebooted, and sure enough, they were both healthy again.
This is where it messes up. It starting loading the Windows logo, with the progress bar. The next thing it does is go black. It doesn't boot at all after that. I have to reboot everytime. I then tried to boot in safe mode. Black screen again. I tried all the possible options in the boot menu, none of them worked. That's where my first problem takes off. So I now have a non-booting OS. The next thing I do is insert the Windows boot disk, and installed Windows XP on the same HD the original OS was on (Don't ask why, I don't know either). After the installation, Windows booted up fine, except I was running on a fresh install. Which how I'm on this site...........
Is it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
View 2 Replies View RelatedI have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
What is the best way to get more space on my C drive? Merge C & D drives to optomize space? and how can that be done
View 3 Replies View RelatedWhen I boot my external hard drive or put a cd into my laptop (running XP), a window pops up, like normal, asking which program I would like to run in order to view the multimedia on the drive. I used to have Nero and other programs like Jukebox, which I have uninstalled, but they still appear on this list as options, although they have no icon and do not work. How can I modify this list to remove the defunct programs? How can I have it not appear at all or run a defualt program automatically?
View 4 Replies View Relatedhave a Maxtor SATA 200 gig hardrive running windows XP. The hardrive always shows up as a Removable Drive. How can i get it to be a standard drives instead of a removable hardrive?MoochuComputer Spec:OS: Windows XP Service Pack 2CPU: AMD ATHLON 64 3200MotherBoard: GIGABYTE GA-K8NS 939Ram: 1Gig DDR 400Harddrive: Maxtor Sata 200Gig
View 5 Replies View RelatedI have a computer at home with two identical 160 GB WD SATAII drives in it and I want a copy of XP on each drive. The first drive (Which I have been using as my gaming computer) has already got XP installed and I want to keep it pretty much free of anything but games so it won't affect performance. On the second drive, I would like to install another copy of XP and use this drive for my common use and with the primary intent of using it for a HDTV capture device. I've researched it for a while and have almost only been able to find information concerning dual booting with IDE drives using a jumper switching device so you don't have to dismantle the computer every time you switch drives.
View 11 Replies View Relatedi have unsuccessfully tried to install a maxtor and a western digital external hard drive. in both cases, i tried both usb 2.0 and firewire. both ports are good. the new hardware "wizard" cant install the new hardware because it cannot find the drivers. i thought xp had all the drivers. the really annoying part is that my kids p.o.s. off-the-shelf emachine recognized and installed both drives! i am currently running peripherals on both usb and firewire with no problems.
View 2 Replies View RelatedI want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
I have this PC and the current HD has a virus on it, so I am trying to format with a new copy of Windows XP SP1. The hard drive is an IDE and the jumper is set on CS. But when it goes to install Windows, it tells me "Setup did not find any hard disk drives installed" I thought this was a problem with SATA Hds???? It's a built PC, the motherboard is a ASUS P5GD1-VM
View 15 Replies View RelatedI have two hard drives with different speeds the primary is 7200 the slave 5400, but my computer sometimes will not boot first time in the morning. I have to close it down after my screen turns off to power save. Which is the best way round for the drives to be installed or could it possibly be something entirely different that is causing the problem please. I have no virus or malware on my computer and all automatic updates are applied on windows XP SP2.
View 8 Replies View RelatedI am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
startup says: 1 Logical Drives found on the host adapter. 1 Logical Drive(s) handled by BIOS This computer previously had Microsoft Small Business Server 2000 installed on it, but by the time I received it, someone had replaced the OS with Ubantu.
Dell PowerEdge 1600SC
Intel Xeon 2.4GHz
2 x 36Gb HDD
1Gb RAM
I have a Dell PC. I installed a copy of Windows Vista on it. I don't like it, so I am trying to reinstall XP Home. When I click on the cd drive the XP Home CD is in, it brings up the menu, but the "Install Windows XP" option is grayed out. I try to boot from the disk, but when it is done loading all the things and I tell it I do not want to repair, but to install, it says "setup did not find any hard disk drives installed on your computer" and makes me reboot my computer. Vista still works fine, I know the Hard Drive is working