When I boot my external hard drive or put a cd into my laptop (running XP), a window pops up, like normal, asking which program I would like to run in order to view the multimedia on the drive. I used to have Nero and other programs like Jukebox, which I have uninstalled, but they still appear on this list as options, although they have no icon and do not work. How can I modify this list to remove the defunct programs? How can I have it not appear at all or run a defualt program automatically?
Is there any way I can be given a choice of which Hard Drive I can startup on when I turn on my computer if I put 2 individual Hard drives in it?If there is, I will purchase another copy of XP but I need to know before going to the expense of buying another XP operating system.
Ever have the curiosity to enable auto run on your floppy drives? Probably not, but just in-case you have had the itch to do so, I will explain how it's done.This tip involves editing the registry, so I would highly recommend making a backup of it first before proceeding.Find or create the key : HKEY_CURRENT_USER->Software->Microsoft->Windows->Current Version->Policies->Explorer->Then find the value named : NoDriveTypeAutoRun.Note : if your value has 95 in it, proceed to step 1, if it has "B5" or anything else, proceed to step 2.Step 1. Right click on this value and click Modify. If the value has 95 in it, delete the number 95 and replace it with 91 , making sure to keep all zeros and spaces in the value.Step 2. If the value has B5 in it, or any other letter followed by the number 5, change ONLY the number to 1, so, for example it looks like B1. NOTE: If you value does not have 95 in it, and instead has a value with a letter such as B and then a 5, this tweak may not work.Then click OK, restart your computer, and you will now be one happy auto run man.
I have ended up with 4 different options for XP Pro when my computer starts. This is, basically, as a result of me re-installing Widows a couple of times to try and solve a very slow running system (more help needed there but I will start a new thread for that).How do I remove the 3 unwanted start options?
I have a problem with a laptop running XP pro SP2. Problem is, if I load a CD or DVD into the Drive they dont auto run they just spin up, and to launch I have to do it through explorer, Similarly with my Digital Camera, when I plug it in its supose to ask me what i want to do with the files but the same happens the Nikon program does not auto run, have tried the solutions mentioned here bon this board but still no go.
I had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
I downloaded pictures from mt digital camera to my harddrive, now when I try to delete them a screen titled "copy" comes up and automactically copies the file. So now I have for example 23 copy of on picture. How do I stop this feature from working or how do I delete those pictures with out making copies?
I'm concerned that I have unnecessary auto-start programs. I downloaded autoruns by sysinternals to help figure this out. I ran the software but now am unsure of what is necessary.
I'm wanting to write a macro that will run when I start my computer or shutdown my computer. Here's the deal, I use netzero as my ISP. Netzero is constantly downloading ads that show up when I go to log on. Now the ads are using audio which is even more annoying. Anyway, I found out where the files are kept and I know the names. I'd like to write a file that auto exe's when I turn on or off the computer. It would also be nice to have a function key that would operate the auto delete. Any ideas on how to make this work?
I plugged in my WD passport external hard drive into my USB port on my pc that has a newly installed copy of windows xp professional. The new hardware installer pops up, I chose the auto find drivers. Then it copied over called Initio. After that I got another little window asking to give the location of this missing file ivusbWxp86.sys.
I just installed a 320gb I had around in a spare PC. I was reading up on jumping everything and understood that I should set the main HD as master and the spare HD as slave on the primary IDE connector, then set my DVD drive as CS on the secondary.My problem is that the master and slave connectors on the ribbon cable aren't long enough to reach both drives.(only places the drives will fit) So I hooked everything up CS while I put the main HD on the primary IDE and then hooked the DVD and spare drive on the secondary IDE. Everything seems to work fine and I can see both drives and everything, but on bootup I have to go into the boot menu and pick the main HD to boot. Is it safe to run everything this way? And if so how do I fix the booting issue?
When I put a dvd in the dvd-player for a game or anything, it used to autostart that dvd. But suddenly, it doesn't autostart anymore. I have to start it manually, by clicking the drive and choosing "autorun". It is the same for other drives as well, such as cd-rom drive. How do I fix this?if it's possible, I would like not to install any programs. So are there any configurations or properties I can check?
I have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
I am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
I was wondering if there is any way to boot my new Windows XP computer off of an old Windows 98 Hard Drive without screwing anything up. What I am trying to do is access and run a program that was installed on the WIN 98 Hard Drive. The software was an expensive Patent Software and I no longer have the installation disk.Here is what I have already tried:1. Connected the WIN98 hard drive to my XP Computer and booted up. Computer started to boot into WIN98 but came back with some kind of memory error and shut down.2. Tried running the software from the WIN98 Drive in WINXP but came back with an error about missing DLL files.Someone mentioned running the drive as a virtual machine.
I think I have a simple question....maybe not. All I want to do is boot to XP home located on different drives, one older, one newer but both with SP2Just built new computer (first time builder) I installed three hard drives, drive H is a new boot disk with XP home, drive C is a storage disk from old computer and disk L is the older boot disk with XP home (reformatted within the past year). The MB assigned the drive letters, not me.H and C are slave and master on Primary IDE, L is Master attached to a PCI card.I want to boot from L. Boot sequence does not recognize L but it does offer the option of booting from OTHER DEVICE so I disable all drives (including H,C and two dvd drives) but it still boots to the new H drive.The bios does not recognize drive L (I guess cause its attached to the PCI card?). My thinking is that if I set up L directly to MB and switch one of the DVD drives to the PCI card it will work.If I do that then I think the MB will recognize drive L and allow me to set it up in the boot sequence the same way that the new drive works.I don't know what I should worry about BUT I am sure that I don't know what will go wrong.
I'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
I have filled my other hard drive with so much junk that it won't even load up anymore, and so it just doesn't come on and it was windows xp. Does any body know how I would wipe, or reformat it? One last question, I have another hard drive, its empty and I don't think its formatted. If I were to use it as the primary hard drive and use my XP boot cd, would it install?
where can I find the location of my Hard-Drive Partitions? I don't mean as in My Computer and double click, Microsoft Windows XP Professional Backup" /noexecute=optin. That sort of data, so I can add my windows 7 OS to the Boot Screen.
Is there any way to partition a hard drive in two without having to reinstall the OS? Do I have to buy a seperate program to do it? Or does Windows include some sort of utility that does it?
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
Problem with low disk space on the 1st of 2 hard drives. This hard drive is only 4 GB, and is my master drive. I have moved as many files as I possibly can to the second (larger) hard drive, without uninstalling and reinstalling all my programs. Is there any way to simply get any "overflow" to "fall into" the other drive.
everytime i start my pc i get the following message: error auto-sensing primary hard disk drive 0 strike the f1 key to continue, f2 to run the setup utility.
when i push f1 the same message will pop up.if i go into the setup utility and look at the primary drive 0 it says hard drive.it stands on auto but it doesnt show the capacity. the same thing with the secondary rive 1.i have 2 hard drives.1 with 20 gig and the second 1 with 250 gig.both arent recognized by my pc.i cant format the pc cause i dont have hard drives to install xp on >.<
I have a computer running Windows XP PRO SP2 with 2, 250gb hard drives. The operating system and programs are on the C drive and the second drive which is removable is supposed to be for my data, but Windows doesn't recognize it so I can't use it. Right now I have my data on an external hard drive, connected by USB.
The second hard drive is new from my manufacturer (I have a custom computer and this is a replacement hard drive--the original was faulty) and I haven't put anything on it yet. When I first put it in my machine, I was able to see it in "My Computer". The next day when I was ready to start copying my data over, it was nowhere to be found. I turned off the machine, pulled out the drive and put it back and rebooted--still no show.
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
I was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
I was working on the computer yesterday when it froze up on me. I didn't think much of it, so I rebooted and continued what I was doing. Later that same day, the computer locked up about 2-3 more times. Then I started hearing ticking noises coming from inside. I shut it off after it froze again. When I powered it back on, the screen during bootup that displays my Hard drive's status (I have four HDs, paired up with one another), says that the first set of hard drives (which is where the OS is on) is healthy, and on the other set, it gets an error with red text. I rebooted, and sure enough, they were both healthy again.
This is where it messes up. It starting loading the Windows logo, with the progress bar. The next thing it does is go black. It doesn't boot at all after that. I have to reboot everytime. I then tried to boot in safe mode. Black screen again. I tried all the possible options in the boot menu, none of them worked. That's where my first problem takes off. So I now have a non-booting OS. The next thing I do is insert the Windows boot disk, and installed Windows XP on the same HD the original OS was on (Don't ask why, I don't know either). After the installation, Windows booted up fine, except I was running on a fresh install. Which how I'm on this site...........
Is it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option. Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
