Corrupted - Repair Fails - Parallel Install Fails
Jul 23, 2008
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
View 6 Replies
ADVERTISEMENT
Oct 8, 2010
My intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies
View Related
May 4, 2007
Some of my system files are corrupted, so I tried to repair Windows XP SP2 by reinstalling. But it was corrupted in the middle because of error "The file 'asms' on the Windows Professional XP CD-Rom is needed". I couldn't go on. The installation is halted. And I couldn't login to Windows any more. I have a very big problem that I'd like to ask you all here. the HD now is readonly, it's NTFS so very few File manager app is used to see it (only Volka in Hiren's Boot CD could do that.
View 14 Replies
View Related
Mar 23, 2005
can anyone tell me how to overcome a boot problem.When starting a computer that has not been used for some time it fails to boot from any disk i.e. floppy, hard drive or cd.It gets so far then this message appears,corrupted file dac2w2k.sys even with Windows XP setup floppies.It gets to the GeForce splash screen then just keeps repeating to this point.
View 14 Replies
View Related
Dec 30, 2009
I tried a repair on XP Professional. I had did a repair, as my s/w wouldn't populate the remove software windows. I had just scanned computer for virus and trojans....all clean.After the repair and on the reboot, I provided my administrative password and I received a message that I had to activate XP before I could log on. I accepted "YES" and the monitor immediately displays a burgandy screen, with the mouse arrow showing. The first few times, I let is display for 20 minutes, but nothing happened.
View 7 Replies
View Related
Dec 29, 2005
Due to several fundamental errors in my Windows installation, today I decided to make a repair install of my Windows XP Home installation. I booted into my Windows disc, did all the normal stuff, and it seemed to go fine. At the end of the text-based stuff, it gave me the instruction to reboot, having moved the files it needed to the HDD, I believe. Anyway, the jist is that the text-based stuff seemed to go fine, I rebooted as instructed, and then did NOT click to boot from the CD (which, I believe, was the right choice). I let Windows load normally but... no GUI based stuff came up to finish off the repair installation, and consequently, what I've done seems to have had no effect whatsoever.
View 5 Replies
View Related
Aug 28, 2008
I'm running Windows XP Pro SP2 and wanted to upgrade to the SP3 that's out. It showed up in Auto Updates, and I ran the install, but it failed. The system still runs ok, but I can't figure out how to get past the error. It tries to install the update KB946648, but fails with an access denied error. The SP3 install then back everything out and quits. How do I get past this error? I checked my update history, and it says that update KB946648 is already installed. Additional info: Tried running the update without the ZoneAlarm Fire wall off and Windows firewall on I also have Norton's AV. Any possibility of a conflict with one of these
View 11 Replies
View Related
Feb 26, 2008
I keep getting the popup in my system tray for Windows Updates, but it continuously fails to install (I get error messages) I tried to go to update.windows.com (in IE) but that fails again. Here is the list of failed updates:
Critical Update for Office XP on Windows XP Service Pack 2 (KB885884)
Security Update for Windows XP (KB873339)
Critical Update for Windows XP (KB886185)
Security Update for Windows XP (KB885836)
Security Update for Windows XP (KB888302)....
View 3 Replies
View Related
Sep 7, 2009
Purchased an HP Deluxe Webcam KQ246AA to use with my Dell 5100 laptop, with Windows XP Home Edition O/S, SP3, Intel Pentium 4, 2.66GHz CPU, and 512 GB RAM. Loaded the HP supplied software CD, and then plugged the cable into a USB 2.0 port, but it failed to connect to the webcam. The hardware wizard gave the following message: �Problem installing the hardware: HP Deluxe Webcam KQ246AA. An error occurred during the installation of the driver.Have tried multiple times to delete and reload the software. Located the driver by clicking on Computer, System Properties, Hardware, then Device Manager tabs and found the driver under �Other Devices� which shows a yellow question mark. Is this the proper location for a device connecting to a USB port? Please advise. The General, Device Status tab contains the following message: This device is not configured correctly (Code 1). To reinstall the drivers for this device, click Reinstall Driver. I�ve tried to reload according to the prompts, but with no success.
View 6 Replies
View Related
Jun 15, 2005
i boot up useing xp pro cd and it stops loading at pci ide bus driver, then shows the file intelide.sys is corrupted , says setup failed, have no idea can it be replace with a good one and how would i do it. it alredy has win xp pro but is unusable, shows no modem even in control pannel, when i open modems nothing happens.
View 1 Replies
View Related
Dec 2, 2007
I have two SATA drives on my machine. and want to start a software re-build. I swapped the cables on the drives, formated the second drive (as NTFS) and tried to load XP. When I select the partition to instal in it tells me that the drive partition is not Windows XP compatible, and I should return to the previous screen to make it so. That screen allows me to delete and create partitions, but a new partition comes up only as "raw". I can change it to NTFS in Disk Manager, but after doing so I still get the same message. I am able to transfer files to and from the drive and open them without problems, so the drive itself seems to be working.
View 2 Replies
View Related
Jan 15, 2009
Last Tuesday's (Critical Update) Security Update for Windows XP (KB951748) A security issue has been identified that could allow a remote attacker to misrepresent a system action or behavior unbeknownst to users on Microsoft Windows systems. You can help protect your computer by installing this update from Microsoft.
View 2 Replies
View Related
Apr 15, 2005
I was given an old Gateway laptop computer with a 400 MHz Pentium processor and 256 kb of RAM, running Windows 98SE. I decided to upgrade it to Windows XP Home. The upgrade starts out fine, it checks the system, gives no error messages, and then begins to copy files. The hard drive and CD indicator lights flicker to indicate files are being copied, and there's the dotted scroll bar that scrolls from left to right on the screen to show you that there's activity going on. the hard drive and CD indicator lights stop flickering, it seems that files are no longer being copied from the CD to the hard drive. However, the dotted scroll bar on the screen keeps on scrolling from left to right. I have left it doing this for several hours; that scroll bar keeps on scrolling, but the installation process stops. The system doesn't hang, the file copying just stops. Win XP is never installed, and after reboot it reverts back to Win 98SE.
Instead of an upgrade, I tried wiping the hard drive, reformatting, and doing a clean install of XP, but it doesn't help. It gets to the same point in the setup, and just stops copying files. No error messages or any indication that anything is wrong. I have tried installing Win XP on at least 10 different occasions, but no success.
View 2 Replies
View Related
Jan 11, 2005
Sequence of events: Win XP Home SP 0 problem began with spyware, which I removed [ using spybot 1.3, ad-aware SE, HiJackThis 1.99, CWShredder, About:buster I tried to update to SP1, from the Windows update site, as well as from a Win XP SP1 update disk, but received an error. In Event Viewer, Windows Update Agent, Event ID 20, so I renamed C:Windowssystem32catroot2 to c:windowssystem32old_catroot2, & retried the SP1 installation. Re-ran SP1 setup / installation, which results in this error: Service Pack 1 Setup Error The file c:program filescommon filessystemole dbmsdasql.dll is open or in use by another program.Start > run > javascript:navigator.appMinorVersion results: Q823353;Q832894;Q867801
View 1 Replies
View Related
Aug 24, 2005
When using "backup" it fails if the shadow copy option is ticked. I'm using XP SP2.
View 1 Replies
View Related
Jul 19, 2008
I'm running windows XP a dell desktop that's a few years old. I was away from home for six months, and before i left i powered my computer down--and now that i'm home, it fails to boot. When i power it on, a few seconds after it will begin to continually beep. they're long, but spaced apart.. after a while, it will just hold the beep as a solid tone. It will normally get loading screen of windows XP (the black one that has the bar and shows the windows logo), and that's when the screen will just go blank and it holds the beep.
I don't get any errors or messages during the startup, and if i enter the bios settings as it's beginning to boot, it will not begin to beep or turn off.
View 13 Replies
View Related
Apr 26, 2008
I am a new user to this site and I am moderately computer literate and have a basic knowledge of my system.
It's a Gateway PC running on Windows XP with a Pentium 4 Processor, as for the base specs I'm not quite sure, but I know they are lower than my laptops specs are.Just today when I got home from work my parents had started to worry about the PC, they would start it up and then wait for it to boot as usual, but this time it started to turn on and wouldn't do anything from there, it would just sit at the loading screen and not even get to the loading bar or welcome screen it's self.So I tried a couple of reboots to see if that would help and it did not, so I picked up my OS install disc to force a reboot or to repair the system, I can restart it but it does the same thing even with the OS disc inside the tower, it doesn't even read it at all.I'm not too sure what else to do at this point, if there are any other suggestions please provide them, if you have further questions to ask me, I'll try and answer them to the best of my ability.
View 6 Replies
View Related
Apr 10, 2008
I'm currently trying to install a fresh copy of windows xp. everything goes smooth until windows enters its setup and the computer stalls at "approximate Time Remaining: 39 Minutes" then turns completely off. It did this to me the last time i reinstalled windows but removing one of my sticks of ram fixed it. This time that hasnt worked nor swapping out any pieces, only ones i havent are my hd, mb, and psu. No error is displayed before shutting off.
View 14 Replies
View Related
Sep 1, 2010
Hello, I have a very screwed up Win XP computer and am trying to reinstall XP from the CD. I changed the boot order to boot from CD and everything goes fine, files load etc. It asks a few questions during the loading which I answer and all goes fine. Then after it loads the files it finally asks 'are you sure you want to proceed' but at that point everything USB fails including the keyboard, so I can't tell it Yes to proceed. There is no other port to plug in an input device other than the 6 usb ports. Is there a way to get around this?
View 1 Replies
View Related
Oct 13, 2006
Somehow or other I've deleted two DLLs that prevent Windows XP from booting up.These are ODBC32.DLL and MSGINA.DLL - I get two seperate error messages saying they are missing and then the PC tries to reboot again.
I have tried booting in safe mode and get the same problem.I have a recovery CD but wish to avoid reinstalling windows and all that entails. I have found reference and source elsewhere to booting from startup floppy discs but have no access to a PC with a disc drive to create them.Is it possible to create a boot CD for windows XP or can anyone suggest another solution?
View 7 Replies
View Related
Aug 9, 2005
Is there some way to understand what fails and why xp hang up on the latest closing screenù?
View 5 Replies
View Related
Dec 26, 2006
I have tried to use the Remote Assistance facility between two Virtual PCs. Both the virtual PCs can connnect & share files - indeed the remote desktop facility works well. Both are set up in a peer-to-peer setup. When I try a remote assistance, the expert computer tries to log in using the HelpAssistant account - but fails. (The remote assistance request is a file placed in a shared folder.) The expert machine waits on a response from the novice (the novice machine doesn't show any please connect dialog boxes) befor eautomatically closing the connection.
View 3 Replies
View Related
Aug 1, 2007
I have a peculiar problem. I can download windows updates, But the installation fails. I did everything what i could do. But no success. I am using IE 7 with Norton internet security suite 2007 (Automatic windows update option enabled in it).
View 5 Replies
View Related
Jul 15, 2008
Installing either Windows 2000 SP4 or SP3 on my Windows 2000 SP2 pc results in error that the Windows Installer is not digitally signed. Clicking the "OK" button results in "An unexpected error occured" and the setup fails. Thinking maybe it's an oudated Windows Installer - "Msiexec.exe" is the cause, installing Windows Installer 3.1 Redistributable (v2) results in error saying it needs SP3 and thus also fails. Downloading from Microsoft SP4, SP3 sites, saving it on my pc and then executing them results in "SP4 (or SP3) Setup determined that the following downloaded SP4 (or SP3) files are corrupt"- showing a whole list of of them.
View 4 Replies
View Related
Nov 6, 2008
I recently went to upgrade my computer and it keeps failing when it comes to the following updates:These are all windows media player related (going by the update description) and i tried reinstalling the media player with no joy.My system is Lenovo T60centrino duo 1.83 GHz504MB RamWindows XP with service pack 3. Any info would be great. The updates installed fine on my other computers so I'm not sure what the problems are. I have searched the web and not found a similar situation anywhere...
View 14 Replies
View Related
Aug 7, 2007
When i try to update windows its fails!! what i do is i run windows update and when its done/time to restart it says the updates failed what do i do ?
View 8 Replies
View Related
Mar 27, 2008
I recently somehow ended up with virusheat on my computer, but the real problem came when i got rid out it. I first tried using spybot and adaware to delete the virus, but that didn't seem to work and i eventually just tried to uninstall it. When I clicked uninstall, it seemed to also delete many of my other programs and scambled the locations of many links. now many programs, like mozilla, doesn't work. Everytime i tried to do something, i got the BSOD. I eventually got rid of Virusheat and the BSODs with malwarebytes', but I still do not have all of the stuff Virusheat deleted. So that when i tried to system restore my comp. That doesn't work, even in safe mode; I just get the "no changes have been made to my system" thing after the system restore reboots my comp. I don't have Norton on my comp, as far as i know (I can't really cheack because search stopped working). My system restore is definetly on and i have many different restore points prior to the virus. I need to know if there is a way to return my comp to the state it was in, before the infection
View 14 Replies
View Related
Mar 20, 2010
I have tried several times to run the Acrobat Reader 9. But it always fails. It says the programme configuration is incorrect, reinstallation may solve this. I have reinstalled it several times, but of no use.
Presently I am managing with " FOXIT" reader. It is also OK. No problem with it. But some documents need only Acrobat. There the problem arises.
View 15 Replies
View Related
Nov 26, 2006
I'm not sure this is a well-known problem or not but it does happen to me and it's bugging me all the time. I need help! Everytime I try to restart my computer from a perfect shut-down, the log-on screen won't appear and I'll be sticking my eyes to the loading screen. But after sometime maybe in 2 or 3 hours, the log-on screen will appear when u restart the computer again. The safe mode can be accessed and it's working just fine.
View 6 Replies
View Related
Jan 26, 2008
I needed to do (and did) some repairs to XP. Most things work, but limited sound.
I tried to upgrade XP using help and support. I need 87 upgrades and they all FAILED.?
View 11 Replies
View Related
Dec 30, 2004
When the comp is first turned on, everything powers up as normal then it stops at the first boot screen prior to the memory test and powers off the monitor. The computer stays on but does nothing.
The system specs are as follows:
Operating System Microsoft Windows XP Professional Service Pack 1
Internet Explorer 6.0.2800.1106 (IE 6.0 SP1)
DirectX 4.09.00.0902 (DirectX 9.0b)
CPU Type AMD Athlon XP, 2000 MHz (15 x 133) 2400+
Motherboard Gigabyte GA-7VT600(-L)
Motherboard Chipset VIA VT8377 Apollo KT600
System Memory 512 MB (PC3200 DDR SDRAM)
BIOS Type Award Modular (07/03/03)
Video Adapter NVIDIA GeForce4 MX 440 with AGP8X (64 MB)
Monitor Benq FP547 [15" LCD] (1336662)
The problem is intermittent and sometimes the computer will randomly shut down.
I initially thought this was video card problem so I have swapped out the video card for a known good one with no success.
Next thing I thought was overheating, I checked the system temps in the bios after a good boot and noticed the CPU temp was on 90 degrees Celsius, I thought this was extremely hot so I cleaned the heat sink and fan and the temp has dropped to the figures below:
Motherboard 38 �C (100 �F)
CPU 73 �C (163 �F)
Aux 45 �C (113 �F)
Seagate ST380011A 43 �C (109 �F)
The CPU temp still seems hot, however the system will run for days without a problem then out of the blue fail to start.
I then suspected a power supply problem and still suspect that this may be the culprit.
Once the computer has failed to boot, it will not boot fully again until the PSU power lead has been removed briefly.
If I unplug the power cable momentarily the system boots fine on the next boot, which seems to indicate something is being reset when the power is shut off totally.
Voltage Values:
350w PSU
CPU Core 1.68 V
+3.3 V 3.25 V
+5 V 4.73 V
+12 V 12.80 V
+5 V Standby 4.89 V
DIMM VTT 1.33 V
I have also run sea-tools which has detected errors on the hard drive, but I believe the problem is occurring before the system checks the hard drive.
I am receiving no bios beep error codes.
I am leaning toward PSU replacement,
View 1 Replies
View Related
