Install Fails Incompatible Drive Partition
Dec 2, 2007
I have two SATA drives on my machine. and want to start a software re-build. I swapped the cables on the drives, formated the second drive (as NTFS) and tried to load XP. When I select the partition to instal in it tells me that the drive partition is not Windows XP compatible, and I should return to the previous screen to make it so. That screen allows me to delete and create partitions, but a new partition comes up only as "raw". I can change it to NTFS in Disk Manager, but after doing so I still get the same message. I am able to transfer files to and from the drive and open them without problems, so the drive itself seems to be working.
View 2 Replies
ADVERTISEMENT
Jul 23, 2008
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
View 6 Replies
View Related
Sep 28, 2010
I have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies
View Related
Mar 20, 2007
I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies
View Related
Dec 13, 2004
I try to installed Windows Media Player 10, and after I download the exe file and opened, I got this massage.This version of Windows Media Technologies is incompatible with this version of Windows.For more information, view the information at the Microsoft web site.Then when I go to the address, it just give me links to a bunch of places but not about media player.
View 14 Replies
View Related
Aug 28, 2008
I'm running Windows XP Pro SP2 and wanted to upgrade to the SP3 that's out. It showed up in Auto Updates, and I ran the install, but it failed. The system still runs ok, but I can't figure out how to get past the error. It tries to install the update KB946648, but fails with an access denied error. The SP3 install then back everything out and quits. How do I get past this error? I checked my update history, and it says that update KB946648 is already installed. Additional info: Tried running the update without the ZoneAlarm Fire wall off and Windows firewall on I also have Norton's AV. Any possibility of a conflict with one of these
View 11 Replies
View Related
Apr 22, 2007
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies
View Related
Feb 26, 2008
I keep getting the popup in my system tray for Windows Updates, but it continuously fails to install (I get error messages) I tried to go to update.windows.com (in IE) but that fails again. Here is the list of failed updates:
Critical Update for Office XP on Windows XP Service Pack 2 (KB885884)
Security Update for Windows XP (KB873339)
Critical Update for Windows XP (KB886185)
Security Update for Windows XP (KB885836)
Security Update for Windows XP (KB888302)....
View 3 Replies
View Related
Sep 7, 2009
Purchased an HP Deluxe Webcam KQ246AA to use with my Dell 5100 laptop, with Windows XP Home Edition O/S, SP3, Intel Pentium 4, 2.66GHz CPU, and 512 GB RAM. Loaded the HP supplied software CD, and then plugged the cable into a USB 2.0 port, but it failed to connect to the webcam. The hardware wizard gave the following message: �Problem installing the hardware: HP Deluxe Webcam KQ246AA. An error occurred during the installation of the driver.Have tried multiple times to delete and reload the software. Located the driver by clicking on Computer, System Properties, Hardware, then Device Manager tabs and found the driver under �Other Devices� which shows a yellow question mark. Is this the proper location for a device connecting to a USB port? Please advise. The General, Device Status tab contains the following message: This device is not configured correctly (Code 1). To reinstall the drivers for this device, click Reinstall Driver. I�ve tried to reload according to the prompts, but with no success.
View 6 Replies
View Related
Jun 15, 2005
i boot up useing xp pro cd and it stops loading at pci ide bus driver, then shows the file intelide.sys is corrupted , says setup failed, have no idea can it be replace with a good one and how would i do it. it alredy has win xp pro but is unusable, shows no modem even in control pannel, when i open modems nothing happens.
View 1 Replies
View Related
Jan 15, 2009
Last Tuesday's (Critical Update) Security Update for Windows XP (KB951748) A security issue has been identified that could allow a remote attacker to misrepresent a system action or behavior unbeknownst to users on Microsoft Windows systems. You can help protect your computer by installing this update from Microsoft.
View 2 Replies
View Related
Apr 9, 2010
what are the steps to create partition using Paragon Manager?
View 1 Replies
View Related
Oct 8, 2010
My intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies
View Related
Jun 16, 2005
When I right click the "Windows" directory in Windows Explorer and select "search" and do a search for "Hosts", the search finds the "Hosts" file in the "C:WINDOWSsystem32driversetc" directory. All well and good because that's what I want and expect.
However, when I right click on the C: drive itself in Windows Explorer and select "search" and do a search for "Hosts", the search fails to find the Hosts file in the "...driversetc." directory. It does find
hosts files elsewhere. For example it finds "Hosts.txt" and "Hosts" files that I placed on my desktop.
When I right click a drive in Windows Explorer and select "search", I damn well want to search the entire drive. Unfortunately, Windows has apparently defaulted to some kind of limited search. How do I force
Windows search the entire drive?
View 11 Replies
View Related
Jun 28, 2005
I have 2 internal IDE HDD's and an external IcyBox USB2 self powered enclosure with a Maxtor 160GB 7200RPM HDD in it. The external HDD is divided into 4x40GB partitions.
Running CHECKDSK on the internal drives is no problem but when I try it on a partition on the external one it goes through Phase1, Phase 2, sometimes reaches Phase 3 then hangs and if left PC switches off. Second time it hung looked at Performance tab in Task Manager and CPU was at 100% and I could hear CPU fan revving up, obviously CPU was overheating and shutting down.Looking in Event Viewer there are a large number of disk errors. Properties says: "The device,DeviceHarddisk2D, has a bad block".Clicking on the MS link tells me:the disk itself failing or the electronics on the IcyBox
enclosure, the data on the disk is accessible and readable? Are there any known problems with this type of external HDD? The problem only came to light when I tried to merge partitions on external HDD using Partition Magic and it couldn't be done because of errors.
View 3 Replies
View Related
Dec 24, 2006
Now as you might know, Compaq pre-loads XP on a partition. I've done a clean re-install once by pushing F4, F10...one of the F?'s during startup. Someone on another thread mentioned that pressing the F(4, 10, ?) whatever is accessing the BIOS on the mobo, which is going to be shipped off the day after Christmas. Will I be able to reinstall XP from my SATA HD that it was loaded on from the factory?
View 6 Replies
View Related
Mar 9, 2005
Trying to do a completely fresh install of XP on a mates computer. I have booted from 2 seperate windows xp discs (both of which have worked fine previously). It gets a small way into the setup (just past RAID drivers etc) then asks "Please insert Windows XP Disk 2 or whatever (depending on which windows version) in Drive A: and press any key to continue." I have never had this happen before and am not sure how to get past it.
View 5 Replies
View Related
Dec 26, 2005
I've just built my first PC using a WD 3200JD SATA hard drive. When I try to install XP Pro the biggest partition size is 131069MB. Is this the limit for XP? If so, will I be able to create a new partition after I install XP on the 131069MB partition. By BIOS recognizes the drive as 320GB. I don't want to loose the remaining space on the drive.
View 2 Replies
View Related
Jan 13, 2006
Some old BASIC programs to run that's why I decided to install Win98 on the other partition of my hard disk.Is it possible to install 98 if I already have XP?
View 8 Replies
View Related
Apr 1, 2005
I need to get a new computer with W.XP. However, I have a couple of DOS programs I can't really give up. Can I run them on WXP? Or, can I "partition" the hard dive and install MS DOS, of which I still have a floppy copy. If all of this can be done, can I print the resulting output of these DOS programs onto my old dot matrix printer?
View 14 Replies
View Related
May 6, 2010
I just installed XP on a new 106GB HD. Somehow I created a primary partition of 7.81GB letter I. That left me 141.23 GB of unallocated disk space. I've already installed my OS and most of my software and other peripherals. That's obviously used most of the 8GB of the primary. The unallocated part of the drive isn't assigned a drive letter so I'm hoping that helps me. I don't need a partition or if I have to have one a small one is fine. I thought the 8GB would be good for the OS with some extra, but I'm real concerned about all that unused space. I did a google and did learn about right clicking on the unallocated side and selecting new partition and taking it from there. I was just a little concerned about making a 2nd mistake. A little frazzled as this is all within 3 hours.
View 5 Replies
View Related
Feb 2, 2006
Cannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies
View Related
Feb 24, 2007
I'm wiping my laptop HD and starting fresh. I want to install DOS and XP, and I've gotten a lot of tips through searching old posts, but I still have a few questions. There wasn't much out there for this particular combination.First, equipment. I've got a Toshiba Satellite M55 with a 75 GB HD. I'm installing HP Home. I have no floppy drive. I'm also using a 250 GB USB external hard drive for backups and such. Partitions: What size for each? I was thinking I'd have one for DOS, one for XP and applications, and one for data, although I'm planning to store most of my non-essential data on the external. Is it beneficial to also have a separate partition for the swap file? I read a recommendation in another thread for a 30 GB volume for XP/apps and a 2 GB volume for the swap file with the rest allocated for data, but I didn't find any recommendations for MS-DOS volume size.
View 6 Replies
View Related
Feb 9, 2007
Hi All,
I'm running Win XP Home SP2 (all up-to-date) on a 6 month old HP laptop. I just bought a new 250GB external USB IDE drive which I formatted to NTFS and just 1 partition. Now I want to partition the disk to 3 different partitions. I went into the Win XP Disk Management utility and when I right click on the external disk one of the options is Delete Partition. Is that the correct first step I need to take before creating the 3 partitions? Or is there some other way to create the 3 partitions? I want each of the 3 partitions to have their own drive letter.
Thanks,
Tom
View 6 Replies
View Related
Aug 31, 2004
My hard drive is divided in 2 partitions. I need to
increase the size of C: partition. Is this possible with
out reinstalling XP pro?
View 7 Replies
View Related
Feb 20, 2008
I have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
View 2 Replies
View Related
Apr 20, 2007
I'm currently in the process of selling my laptop. I wanted to nuke the while disk to make sure all my confidential information had gone, using DBAN, but I couldn't get it to create a disk, so instead I'm deleting the partitions on my computer, formatting them, then erasing them using Heidi's Eraser (35 passes).
I had two partitions: a C and D drive. I installed two OS's on the C drive, and I deleted the D partition, and created a new one which became F. i then erased F, so that anything that was on the previous D had been completely cleaned. I then put on a copy of XP on F. So, when I start up my computer, I use the OS which is logged on F. Can i delete the C partition now, which has two OS's on it, whilst I'm using the OS on F? I want to do that, create a new partition, and then erase it 35 passes.
View 7 Replies
View Related
Aug 23, 2006
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies
View Related
Sep 2, 2005
40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies
View Related
Aug 24, 2005
added new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
View 3 Replies
View Related
Jun 1, 2005
When the system boots into the new drive R:, it still wants the boot partition c: for something. If I boot with the IDE disconnected, it'll boot to the login screen, and allow me to log in, but after a few minutes of a blank screen & cursor, it drops back to the login.
I have PartitionMagic 7.0, and used DriveMapper to change all references to C: to R:, but that didn't do it. How do I cut my system's dependence on the failing drive, before it fails altogether?
View 12 Replies
View Related
