I need to get a new computer with W.XP. However, I have a couple of DOS programs I can't really give up. Can I run them on WXP? Or, can I "partition" the hard dive and install MS DOS, of which I still have a floppy copy. If all of this can be done, can I print the resulting output of these DOS programs onto my old dot matrix printer?
View 14 RepliesI have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies View RelatedI installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedI have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies View Related40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies View Relatedadded new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
When I completely re-did my hard drive, I split it into two partitions; a 50gb C: and a 30gb paritition. I don't know how to format or access my 30gb partition or turn it into an actual (letter):Do I need a special program?
View 13 Replies View RelatedI have an old customized computer from my grandma and when it boots up it asks me to select a operation system, there are two. How do I delete the operating system I don't want?I don't care if I have to reformat the whole hard drive... I would actually prefer to. And I have tried to delete one, but I cant seem to get rid of one of them.
View 4 Replies View RelatedI'm not sure this belongs in this section so if its out of place, plz move it.Ok, I just bought a HITACHI HDT725032VLA360 320GB HDD. My OS is currently installed on my 80GB WD800JB. I was thinking of reinstalling windows on the HITACHI but I'm unsure of how to partition it to ensure my performance is as good as possible. So what are your recommendations for the partition size for the OS on the HITACHI ?
View 7 Replies View RelatedI recently turned on my computer to find that one of my hard drives is not formated, but was full of data the day before.Is there a way to recover the partition and data without paying for data recovery services?
View 6 Replies View RelatedI am using xp home and have a 18.6 GB byte hard drive and will be reformatting soon and was wondering if I should partition it or not.What are the advantages?Is it ok to leave it as 1 as I have it now?
View 8 Replies View RelatedI have an xp partition that takes up about half of my hard drive.The rest of the hard drive is just un-partitioned space.What is the easiest and fastest way to resize the xp partition so that it takes up the entire hard drive?
View 6 Replies View RelatedNow as you might know, Compaq pre-loads XP on a partition. I've done a clean re-install once by pushing F4, F10...one of the F?'s during startup. Someone on another thread mentioned that pressing the F(4, 10, ?) whatever is accessing the BIOS on the mobo, which is going to be shipped off the day after Christmas. Will I be able to reinstall XP from my SATA HD that it was loaded on from the factory?
View 6 Replies View RelatedI have partitioned my hard drive and loaded Windows XP in one partition. How do I set the default to load any programs into the second partition. My intent is to only have the operating system in the first partition.
View 3 Replies View RelatedI copied my data files to my external Maxtor hard disk before I tried to reformat my internal hard drive and reload Win XP. However during my partition, I didn't realize I still had the external drive (160GB) plugged in and it showed up at the top of the list and the original internal (80GB) below it. So, I followed the instruction mistakenly and went through the process of deleting the partition(on the external hard drive) and tried to partition it into two drives. Then I got an error message as I continue to try to format the hard drive "Your computer's startup program cannot gain access to the disk containing the partition or free free space you choose . Set up cannot install Window XP on this hard disk." I stopped, reboot and tried to go through the delete partition several times with the same error message. After several attempts, I realized that the external hard drive was still plugged in.
So I unplugged the external hard drive and reboot to go through the process of reformatting and partition the internal hard drive into C drive and E drive and loaded Win XP. Now even though I plugged in the hard.After I installed the external hard drive's
software,driver and restarted the computer, I connected the external hard drive and don't see the drive in my computer. I could find it under Control Panel/System/Device Manager/Disk drives but it doesn't show up as an external hard drive under "My computer" with a drive letter. Under the disk management, I see the drive as Disk1 but it was unallocated. Did I lose all my data due to the delete of partition? Can I recover my data and drive ?
I'm having a hard time formating my system. I recently got virus that was so bad i couldn't access my desktop, so i am now formating my hard drive. I go through the process of a clean install and i make the partition I hit quick ntfs and it goes on fine until it restarts the computer. All it does is it either loads up on the cd or it hangs on a - mark on a black background, and later tells me non system disk or disk error replace and strike any key when ready. I'm wondering if jumper settings may have something to do with this or if the hard drive is screwed up.
View 1 Replies View RelatedMy computer came with a 80gb HD with windows xp pro.. I had took a 180gb hd from another comp. that was running windows xp home and connected it as a slave drive. A window popped warning me that vital info. would be deleted in order to format/ partition the second drive (180gb HD). Was this a mistake doing it in this manner? If not...How would I go about using the whole "180gb" and not just the 35gb it's only allowing me to use. And is there any way to move files so that they will be protected?
View 2 Replies View Relatedmy plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
View 1 Replies View RelatedI have a 250GB Western Digital hard drive with a ~195GB partition formatted as FAT32. The partition is called "Documents" and has the letter C: assigned to it. The rest of the hard drive isn't formatted. The operating system (WinXP) is installed on a different hard drive.Since yesterday in My Computer or Explorer it's called "Local Disk C:" and whenever I click on it I get a box that says "The disk in drive C is not formatted. Do you want to format it now?". For two hours it came back and I backed up all the most important information but then the same problem came back again. I was able to see the contents of the partition through a few applications but not access it. My whole computer is working sluggish since this happened.
View 14 Replies View RelatedTrying to do a completely fresh install of XP on a mates computer. I have booted from 2 seperate windows xp discs (both of which have worked fine previously). It gets a small way into the setup (just past RAID drivers etc) then asks "Please insert Windows XP Disk 2 or whatever (depending on which windows version) in Drive A: and press any key to continue." I have never had this happen before and am not sure how to get past it.
View 5 Replies View RelatedI've just built my first PC using a WD 3200JD SATA hard drive. When I try to install XP Pro the biggest partition size is 131069MB. Is this the limit for XP? If so, will I be able to create a new partition after I install XP on the 131069MB partition. By BIOS recognizes the drive as 320GB. I don't want to loose the remaining space on the drive.
View 2 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
i have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
View 10 Replies View RelatedHide any of hard disk partition from being seen in My Computer.
View 6 Replies View RelatedSome old BASIC programs to run that's why I decided to install Win98 on the other partition of my hard disk.Is it possible to install 98 if I already have XP?
View 8 Replies View RelatedIt started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
I understand the need for system restore to be enabled on the C: drive. But should it be enabled on the d: drive/recovery partition?
View 1 Replies View RelatedIf i run fully recovered (all data in the first partition will be destroyed), can i have get my files back, because my computer keep restart with "registry file failure"?
View 1 Replies View Relatedive got a hard drive that i could accsess all the time. Then one day no workie now when I try to acceses the drive I get a window that pops up and says Compaq Recovery partition warning. This area of your hard disk (or partition)contains files used for your system recovery. donot delete or alter these files. anychange to these files could delete or alter these files
View 1 Replies View Related