If i run fully recovered (all data in the first partition will be destroyed), can i have get my files back, because my computer keep restart with "registry file failure"?
View 1 Repliesi have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
View 10 Replies View RelatedI have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI Think After Reinstalling Windows Xp A Created A Partition, That Now Wont Let Me Access My Files. Is This Possible? Can They Be Accessed?
View 3 Replies View RelatedI can recovering my data from a hard drive I've recently corrupted . Whilst in the process of moving/renaming partitions I've managed to corrupt my harddrive which contains an xp operating system, four partitions and 150 gigabytes of movies etc. I've now installed xp on my other drive but it wont recognise the other one. Infact its not recognising the other disc or its patitions at all, even thru windows recovery 'chkdsk' where it just says disk it unformatted. Norton disc doctor at least recognised the disc as corrupted (and unformatted) and declares a bad partion table but is unable to fix it. I think my data is probably lost for good and I'm going to have to reformat
View 2 Replies View Relatedhard disk not work Recovering the data from damaged hard disk?
View 3 Replies View Relatedi accidently deleted my partition which had my original xp home sp 3 on i have used recuva to recover the lost files but now dont no how to get these files back onto my pc and reinstall my original xp home please can somebody give me directions i have been to local computer shops but they just want to put a brand new xp on and charge a lot i have the files so would rather just use them.
View 8 Replies View RelatedI am having a problem with my 400GB HDD not displaying correctly - it displays as 127GB - in a new install of Windows XP on a seperate drive. My original setup was as follows:400GB SATA HDD with Windows XP as the Operating System plus Data - Single Partition - NTFS. 300GB SATA HDD with purely data - Single Partition - NTFS.I bought a new HDD today (SATA 320GB) and installed it in the PC. The original XP install saw it was installed and offered formatting options from Control Panel -> Administrative Tools -> Computer Management - no formatting options were taken.I then installed Windows XP (non-SP2 install, SP2 has been installed afterwards along with Video Card and Motherboard drivers) to the new HDD without removing the old drives first.
View 7 Replies View Related[spoiler][/spoiler]my hard disk chrashing my data to loset. how to recvery in my data
View 1 Replies View RelatedThis is the problem in which I'm currently in. I saved roughly about 15Gs worth of music and numerous pictures in my documents. Well since then I've changed the h.d, motherboard, and a few other things and installed a fresh copy of windows on the alternate h.d. well with the first h.d set as a slave and no means of going back to my original setup because i deleted most of everything on the h.d except a few folders it won't give me access to those folders. I'm wondering is there anyway of gaining access to those folder?
View 3 Replies View RelatedI am after help in that i would like to take hard drive, volume 27g from one laptop win xp pro, and place on another laptop 80g win xp home.I do have memory flash but only 256mb.I also think i will need to look at partioning drives do hope i get a reply/plural great support
View 8 Replies View Relatedmy plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
View 1 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
Hide any of hard disk partition from being seen in My Computer.
View 6 Replies View RelatedI would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
View 2 Replies View RelatedI am doing a new install with xp pro using a maxtor ultra sata 250gb hdd. XP
finds the drive okk, but only recognizes approx 130 mb of the drive.
i have an old computer that has windows xp professional on it and i would like to format the hard drive so nothing can be recoverd because we are going to though the computer
View 6 Replies View RelatedCan I install XP on a hard drive which has only one partition with data without destroying the data?
View 2 Replies View RelatedAfter I updated to sp2 and other updates via auto update and went to WMP 10, I noticed that the new DVD+RW's I bought the other day are not excepting a format or allowing me to erase them. Out of the box they are initially recognized by XP Pro, then when formating with nero they lock up during finalizing and I have to reboot. At this point the disk, after reboot is not recognized and seems to be in an endless loop or check mode state. I have, I think , 6 damaged so far. I am afraid to experiment and thought RW disks could be at least erased and reused but XP can't see the RW media and this does not let me use any other app to erase or reformat. Any ideas or registry fixes out there?
View 8 Replies View RelatedMy XP partition is NTFS. I also have a 10 GB partition formatted FAT32 that I use mainly for disk images & some backups. I noticed a new file on this partition called "gdiplus.dll" What is this and why is it on my data partition? I deleted it once but it is back again. I do not use indexing and system restore is not active on the data partition.
View 4 Replies View RelatedI believe strongly that you should have a partition only for the operating system and others for data.If you system gives you problems it is much easier just format the operating partition and reinstall, then trying to find all of your data and download scattered through the a mix partition.Give some thought would you rather have you data safe and way from the operating system?
View 4 Replies View RelatedI will use this partition as example. I made 50GB partition on my new hard drive why does it only show 49.9GB instead of 50GB? It’s small amount of missing data, but would like to find out what is happening. The same situation also applies to my other partitions on my new hard drive.But when I look at my old hard drive partitions using My Computer / Properties which is attach to the same computer it gives me correct amount of data on the partitions. Example would be 100GB not 99.9. These partitions on my old hard drive were setup when I was installing Windows XP several years ago.
View 6 Replies View RelatedIf I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies View Relatedi want to restore my computer to its original configuration. i know the in the partition named -: (yeah, its like that) lies the information for it, but the computer on startup will not give me that choice (like pressing f10 to restore)... my question is "how do I restore manually using all that data in there?"
any thoughs or comments welcomed
I was running on Windows XP SP2 working fine for me. Last week when I connected to the internet while browsing may be some virus came into it and my Laptop (Acer Aspire 5050) start malfunctioning. I decided to install windows XP SP2 again, while installing it started formatting my hard drive without prompting for it in the mean while it got restarted and I lost my whole data. I again repartitioned it and install windows XP some how.
View 1 Replies View RelatedI was reformatting a friends Laptop with a new O/S. I backed up 680MB of pictures, documents onto my external Hard drive. I checked twice that the data was on there before reformatting. After I reformatted for some reason it won't let me access this file on my external H.D. It says no access to the F drive and says the file is empty. I am able to get into other files on the external just not this particular file. I tried using a program called Power Data recovery to find the files off the deleted C drive partition. It found some if not all of the files. However, when I go to access them it say's you can't get into the files or a word doc comes up in all these weird letters.
View 4 Replies View RelatedCan a partition be divided into two partitions using XP software without losing data? What is a virtual partition? Advantages, disadvantages?If 3rd party software is required, then please make recommendations. My machine is running XP Home SP2. The drive came from HP with two partitions. One partition's software is locked.
View 7 Replies View Relatedlet's just say me and my PC haven't been getting along very well lately . In the last 2 weeks I've successfully fought off a nasty CWS infection, subsequently upgraded to XP SP2 and all the latest patches, and now this. I was using the machine yesterday morning, and it was exceedingly sluggish. Task Manager showed that TurboTax which I'd left running wasn't responding. I repeatedly attempted to close TT, and 2 minutes later it finally closed. Instead of rebooting immediately, I went to IE to browse the web. A few minutes later the machine came screeching to a halt. No BSOD, just frozen.
I resigned myself to using the reset button. On the reboot, the machine started to load XP, then reset on its own back to the BIOS splash screen. I attempted to reboot normally, same thing. Last known good configuration, same thing. Safe Mode, same thing. So, XP is hosed. I loaded the System Recovery console and started looking around. Dir reports a problem enumerating directories on C:/. Chkdisk reports there are errors it can't fix.
I'm going to go ahead and appologize if I'm a bit unclear anywhere in this post as I'm not 100% certain how to phrase what happened. Also if this isn't in the proper forum.A few days ago I got the following alerts from avast.3/4/2010 9:22:41 PM 1267755761 SYSTEM 1216 Sign of "Win32:Rootkit-gen [Rtk]" has been found in "C:WINDOWSsystem32driversNpfs.SYS" file. I clicked delete when they popped up and proceeded to attempt to restart my computer in safe mode to run mbam to get rid of an "antivirus" program that installed itself on my computer. When I tried to restart though I kept getting an "Invalid form id" error and had to do a system recovery.
View 4 Replies View Related