I would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
View 2 RepliesI'm not sure this belongs in this section so if its out of place, plz move it.Ok, I just bought a HITACHI HDT725032VLA360 320GB HDD. My OS is currently installed on my 80GB WD800JB. I was thinking of reinstalling windows on the HITACHI but I'm unsure of how to partition it to ensure my performance is as good as possible. So what are your recommendations for the partition size for the OS on the HITACHI ?
View 7 Replies View RelatedNew HDD-Disk Managment -Drive size is displayed as less?Evening Guys, Just after a bit of help from you.Just been out and purchased a 250GB PATA HHD to use as a slave.Fitted the new drive as normal and booted the PC.Located the drive in Disk Management, Right clicked the DISK 0 which was the new unallocated drive, and clicked initialize, The drive is showing as 31.49GB Unallocated, As the drive has not been formatted as yet i thought this would be the reason why, Right clicked the 31.49GB Unallocated, selected new partition and the "wizard" will only allow a maximum of 31GB drive partition.As this is a 250 gb drive, i need this to be larger, ideally 250 GB before format.Please can you advise how i go about formatting the drive and increasing the size?
View 14 Replies View RelatedI have a single disk partitioned into a MBR then an extended partition in 3 logical disks. (hopefully that's the right terminology).But myboot drive is running out of space.How do I decrease one drive so that I can extend mz boot drive?
View 4 Replies View RelatedMy hard drive is divided in 2 partitions. I need to
increase the size of C: partition. Is this possible with
out reinstalling XP pro?
I use Windows XP Professional OS on an Intel Pentium 4 PC with 512 MB RAM. Presently I have a single disk drive of 40 MB which has been divided into three logical drives C, D and E with total sizes of 20, 10 and 10 MB respectively.
I now want to add a second disk of 80 MB capacity and would like to increase the total size of the three existing logical drives to 40 MB each.Is there a feature available in Windows XP that will permit me to do this without having to reformat the existing 40 MB disk drive ?I have certain software installed in the PC for which the setup files are not available. Reformatting the existing disk drive will result in the loss of these applications. I would also not like to add more logical drives i.e. F, G, H etc.
Im intrested in purchasing a product to clone hard disks in Windows but I have a question before hand If I clone a hard disk into some DVD´s and the I want to restore that image into another hard disk, a new, different size/brand hard disk. Is that possible? Is there a "correct" way to do it? Someone reccomendme either Norton Ghost or Acronis True Image, but Im not sure if itll help me. I hope your answers help me to decide weather to buy the software.
View 9 Replies View Relatedmy plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
View 1 Replies View RelatedI will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
View 9 Replies View RelatedI've recently installed windows xp over again and when I did it doesn't read the full hdd. so now I have 124 of the full 232.I'm on SP 2 right now and I believe I'm fully updated. I've already attempted partition magic and one I think it was called gnome drive. Both want me to purchase the products so I'm trying to find the free way out.
View 8 Replies View RelatedI Have just installed a Maxtor SATA 200 GB hard drive in my computer.Partition Magic reads this drive at slightly over 200 GB, but WindowsXP reports it as 193GB. What gives?
View 4 Replies View RelatedI have 2 computers that i need to know what is the max hard drive size. One computer is running winME and the other is running Win2000. As for the win2000 i changed the registry for 48 bit LBA support in order to see my 320gb drive. The reason why I ask is because I'm planning to purchase a 750gb or 1tb external hard drive to backup my system. I don't want to purchase it to find that the system can only see 500gb or something like that. I'm gonna post this same post in the winMe area.
View 14 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
i have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
View 10 Replies View RelatedHide any of hard disk partition from being seen in My Computer.
View 6 Replies View RelatedI copied a large directory to a backup drive, preparing to replace the HD on which the directory currently exists.After copying, the "size" of source and target both match:7.14 GB (7,673,318,222 bytes). The number of files and folders match as well. However, the "size on disk" does NOT match.On the source drive:7.24 GB (7,783,518,208 bytes)On the external (target) drive:8.21 GB (8,821,047,296 bytes) Is this a problem? Should I be concerned that the copy was not completed correctly?
View 8 Replies View RelatedMy problem in a nutshell. I'm trying to install XP as a repair but it isn't going well. I've done it before and I'm quite familiar with the steps, but this time there is one new wrinkle. Windows tells me it sees two partitions, which it shouldn't. There is only one, but it is comprised of two HDD's in a stripe setup. There is a total of 1.2TB of space between the two of them. The free space is somewhere in the 800-900 GB range before the machine started having problems. Windows keeps saying that there is only 900 MB of free space, which is not enough to install windows. Laughable. There is a ton of free space on those drives, and there is an existing XP installation, albiet one that doesn't work.
View 3 Replies View RelatedIf i run fully recovered (all data in the first partition will be destroyed), can i have get my files back, because my computer keep restart with "registry file failure"?
View 1 Replies View RelatedOver a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies View RelatedI have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies View Related40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies View Relatedadded new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
When I completely re-did my hard drive, I split it into two partitions; a 50gb C: and a 30gb paritition. I don't know how to format or access my 30gb partition or turn it into an actual (letter):Do I need a special program?
View 13 Replies View RelatedI have an old customized computer from my grandma and when it boots up it asks me to select a operation system, there are two. How do I delete the operating system I don't want?I don't care if I have to reformat the whole hard drive... I would actually prefer to. And I have tried to delete one, but I cant seem to get rid of one of them.
View 4 Replies View RelatedI recently turned on my computer to find that one of my hard drives is not formated, but was full of data the day before.Is there a way to recover the partition and data without paying for data recovery services?
View 6 Replies View RelatedI am using xp home and have a 18.6 GB byte hard drive and will be reformatting soon and was wondering if I should partition it or not.What are the advantages?Is it ok to leave it as 1 as I have it now?
View 8 Replies View RelatedI have an xp partition that takes up about half of my hard drive.The rest of the hard drive is just un-partitioned space.What is the easiest and fastest way to resize the xp partition so that it takes up the entire hard drive?
View 6 Replies View RelatedI have partitioned my hard drive and loaded Windows XP in one partition. How do I set the default to load any programs into the second partition. My intent is to only have the operating system in the first partition.
View 3 Replies View RelatedI have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies View Related